Generated by kicad-footprint-generator · KiCad file format 20260206
MSP430G2230IDR
Texas Instruments · TI MCU · SOIC-8
MSP430G2230IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Digital supply voltage; the device operates over a low supply voltage range of 1.8 V to 3.6 V. |
| 2 | P1.2/TA0.1/A2 | bidirectional | General-purpose digital I/O pin that also serves as Timer_A TA0.1 capture CCI1A input or compare Out1 output, and ADC10 analog input A2. |
| 3 | P1.5/TA0.0/A5/SCLK | bidirectional | General-purpose digital I/O pin that also serves as Timer_A TA0.0 compare Out0 output, ADC10 analog input A5, and USI SCLK (clock input in I2C mode; clock input/output in SPI mode). |
| 4 | P1.6/TA0.1/A6/SDO/SCL | bidirectional | General-purpose digital I/O pin that also serves as Timer_A TA0.1 capture CCI1B input or compare Out1 output, ADC10 analog input A6, USI SDO data output in SPI mode, and USI SCL I2C clock in I2C mode. |
| 5 | P1.7/A7/SDI/SDA | bidirectional | General-purpose digital I/O pin that also serves as ADC10 analog input A7, USI SDI data input in SPI mode, and USI SDA data input in I2C mode. |
| 6 | RST/NMI/SBWTDIO | input | Reset input, nonmaskable interrupt input, or Spy-Bi-Wire test data input/output during programming and test. |
| 7 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on Port 1; the device protection fuse is connected to TEST, and it also serves as the Spy-Bi-Wire test clock input during programming and test. |
| 8 | DVSS | power_in | Digital ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VCC to VSS | -0.3 | 4.1 | V | 14 | |||
| Voltage applied to any pin | -0.3 | V | Upper limit printed as VCC + 0.3 V; all voltages referenced to VSS | 14 | |||
| Diode current at any device terminal | -2 | 2 | mA | 14 | |||
| Storage temperature | Tstg | -55 | 150 | °C | Unprogrammed device | 14 | |
| Storage temperature | Tstg | -40 | 150 | °C | Programmed device | 14 | |
| Supply voltage range during program execution | VCC | 1.8 | 3.6 | V | During program execution | 14 | |
| Supply voltage range during flash program or erase | VCC | 2.2 | 3.6 | V | During flash program or erase | 14 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 16 | MHz | VCC ≥ 3.3 V, duty cycle 50% ± 10% | 14 | ||
| Active mode supply current (1 MHz) | IAM,1MHz | 300 | 370 | µA | VCC 3 V; fDCO=fMCLK=fSMCLK=1 MHz, fACLK=0 Hz, program in flash, CPUOFF=0, SCG0=0, SCG1=0, OSCOFF=0 | 15 | |
| Low-power mode 2 supply current | ILPM2 | 22 | 29 | µA | 25°C, VCC 2.2 V; fMCLK=fSMCLK=0 MHz, fDCO=1 MHz, fACLK=32768 Hz, CPUOFF=1, SCG0=0, SCG1=1, OSCOFF=0 | 16 | |
| Low-power mode 3 supply current (VLO) | ILPM3,VLO | 0.5 | 0.7 | µA | 25°C, VCC 2.2 V; fACLK from VLO, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=0 | 16 | |
| Low-power mode 4 supply current | ILPM4 | 0.1 | 0.5 | µA | 25°C, VCC 2.2 V; fACLK=0 Hz, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=1 | 16 | |
| Low-power mode 4 supply current | ILPM4 | 0.8 | 1.5 | µA | 85°C, VCC 2.2 V; fACLK=0 Hz, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=1 | 16 | |
| Positive-going input threshold voltage (Port P1) | VIT+ | 1.35 | 2.25 | V | VCC 3 V | 17 | |
| Negative-going input threshold voltage (Port P1) | VIT- | 0.75 | 1.65 | V | VCC 3 V | 17 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 1 | V | VCC 3 V | 17 | |
| Pullup/pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 17 |
| High-impedance leakage current (Port P1) | Ilkg(Px.y) | -50 | 50 | nA | VCC 3 V | 17 | |
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | 0.14 | MHz | VCC 3 V; RSELx=0, DCOx=0, MODx=0 | 21 | |
| DCO frequency (7, 3) | fDCO(7,3) | 0.8 | 1.5 | MHz | VCC 3 V; RSELx=7, DCOx=3, MODx=0 | 21 | |
| DCO frequency (12, 3) | fDCO(12,3) | 4.3 | 7.3 | MHz | VCC 3 V; RSELx=12, DCOx=3, MODx=0 | 21 | |
| DCO frequency (14, 3) | fDCO(14,3) | 8.6 | 13.9 | MHz | VCC 3 V; RSELx=14, DCOx=3, MODx=0 | 21 | |
| 1-MHz tolerance over temperature | -3 | 0.5 | 3 | % | 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±0.5 | 22 | |
| 8-MHz tolerance over temperature | -3 | 1 | 3 | % | 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±1.0 | 22 | |
| 12-MHz tolerance over temperature | -3 | 1 | 3 | % | 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±1.0 | 22 | |
| 16-MHz tolerance over temperature | -3 | 2 | 3 | % | 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±2.0 | 22 | |
| 1-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 8-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 12-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 2.2 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 16-MHz tolerance over VCC | -6 | 2 | 3 | % | 25°C, 3 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 1-MHz tolerance overall | -5 | 2 | 5 | % | -40°C to 85°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 8-MHz tolerance overall | -5 | 2 | 5 | % | -40°C to 85°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 12-MHz tolerance overall | -5 | 2 | 5 | % | -40°C to 85°C, 2.2 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 | 22 | |
| 16-MHz tolerance overall | -6 | 3 | 6 | % | -40°C to 85°C, 3 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±3 | 22 | |
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, 3 V | 24 |
| Analog supply voltage | VCC | 2.2 | 3.6 | V | VSS = 0 V | 27 | |
| Positive built-in reference voltage | VREF+ | 1.41 | 1.5 | 1.59 | V | 3 V; IVREF+ ≤ IVREF+max, REF2_5V = 0 | 28 |
| Positive built-in reference voltage | VREF+ | 2.35 | 2.5 | 2.65 | V | 3 V; IVREF+ ≤ IVREF+max, REF2_5V = 1 | 28 |
| Maximum VREF+ load current | ILD,VREF+ | -1 | 1 | mA | 3 V | 28 | |
| VREF+ load regulation | -2 | 2 | LSB | IVREF+ = 500 µA ± 100 µA, VAx ≈ 0.75 V, REF2_5V = 0 | 28 | ||
| Temperature coefficient of built-in reference | TCREF+ | -100 | 100 | ppm/°C | IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA, 3 V | 28 | |
| Positive external reference input voltage range | VEREF+ | 1.4 | 3 | V | VEREF- ≤ VEREF+ ≤ VCC, 0.15 V, SREF1 = 1, SREF0 = 1 | 29 | |
| Positive external reference input voltage range | VEREF+ | 1.4 | V | VEREF+ > VEREF-, SREF1 = 1, SREF0 = 0; upper limit printed as VCC | 29 | ||
| Negative external reference input voltage range | VEREF- | 0 | 1.2 | V | VEREF+ > VEREF- | 29 | |
| Static input current into VEREF+ | IVEREF+ | -1 | 1 | µA | 0 V ≤ VEREF+ ≤ VCC, 3 V, SREF1 = 1, SREF0 = 0 | 29 | |
| Static input current into VEREF- | IVEREF- | -1 | 1 | µA | 0 V ≤ VEREF- ≤ VCC, 3 V | 29 | |
| ADC10 input clock frequency | fADC10CLK | 0.45 | 6.3 | MHz | ADC10SR = 0, 3 V | 29 | |
| ADC10 input clock frequency | fADC10CLK | 0.45 | 1.5 | MHz | ADC10SR = 1, 3 V (ADC10 linearity parameters) | 29 | |
| ADC10 built-in oscillator frequency | fADC10OSC | 3.7 | 6.3 | MHz | ADC10DIVx = 0, ADC10SSELx = 0, fADC10CLK = fADC10OSC, 3 V | 29 | |
| Conversion time | tCONVERT | 2.06 | 3.51 | µs | ADC10 built-in oscillator, ADC10SSELx = 0, fADC10CLK = fADC10OSC, 3 V | 29 | |
| Integral linearity error | EI | -1 | 1 | LSB | 3 V | 29 | |
| Differential linearity error | ED | -1 | 1 | LSB | 3 V | 29 | |
| Offset error | EO | -1 | 1 | LSB | 3 V; source impedance RS < 100 Ω | 29 | |
| Gain error | EG | -2 | 1.1 | 2 | LSB | 3 V; typ printed ±1.1 | 29 |
| Total unadjusted error | ET | -5 | 2 | 5 | LSB | 3 V; typ printed ±2 | 29 |
CAD (KiCad official)
- Symbol:
MSP430G2230IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
msp430g2230idr-etched.step/msp430g2230idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430g2230idr.step/msp430g2230idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
97290837e4d73839, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).