Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430G2230IDR

Texas Instruments · TI MCU · SOIC-8

MSP430G2230IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage; the device operates over a low supply voltage range of 1.8 V to 3.6 V.
2 P1.2/TA0.1/A2 bidirectional General-purpose digital I/O pin that also serves as Timer_A TA0.1 capture CCI1A input or compare Out1 output, and ADC10 analog input A2.
3 P1.5/TA0.0/A5/SCLK bidirectional General-purpose digital I/O pin that also serves as Timer_A TA0.0 compare Out0 output, ADC10 analog input A5, and USI SCLK (clock input in I2C mode; clock input/output in SPI mode).
4 P1.6/TA0.1/A6/SDO/SCL bidirectional General-purpose digital I/O pin that also serves as Timer_A TA0.1 capture CCI1B input or compare Out1 output, ADC10 analog input A6, USI SDO data output in SPI mode, and USI SCL I2C clock in I2C mode.
5 P1.7/A7/SDI/SDA bidirectional General-purpose digital I/O pin that also serves as ADC10 analog input A7, USI SDI data input in SPI mode, and USI SDA data input in I2C mode.
6 RST/NMI/SBWTDIO input Reset input, nonmaskable interrupt input, or Spy-Bi-Wire test data input/output during programming and test.
7 TEST/SBWTCK input Selects test mode for the JTAG pins on Port 1; the device protection fuse is connected to TEST, and it also serves as the Spy-Bi-Wire test clock input during programming and test.
8 DVSS power_in Digital ground reference.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS -0.3 4.1 V 14
Voltage applied to any pin -0.3 V Upper limit printed as VCC + 0.3 V; all voltages referenced to VSS 14
Diode current at any device terminal -2 2 mA 14
Storage temperature Tstg -55 150 °C Unprogrammed device 14
Storage temperature Tstg -40 150 °C Programmed device 14
Supply voltage range during program execution VCC 1.8 3.6 V During program execution 14
Supply voltage range during flash program or erase VCC 2.2 3.6 V During flash program or erase 14
Operating free-air temperature TA -40 85 °C 14
Processor frequency (maximum MCLK frequency) fSYSTEM 6 MHz VCC = 1.8 V, duty cycle 50% ± 10% 14
Processor frequency (maximum MCLK frequency) fSYSTEM 12 MHz VCC = 2.7 V, duty cycle 50% ± 10% 14
Processor frequency (maximum MCLK frequency) fSYSTEM 16 MHz VCC ≥ 3.3 V, duty cycle 50% ± 10% 14
Active mode supply current (1 MHz) IAM,1MHz 300 370 µA VCC 3 V; fDCO=fMCLK=fSMCLK=1 MHz, fACLK=0 Hz, program in flash, CPUOFF=0, SCG0=0, SCG1=0, OSCOFF=0 15
Low-power mode 2 supply current ILPM2 22 29 µA 25°C, VCC 2.2 V; fMCLK=fSMCLK=0 MHz, fDCO=1 MHz, fACLK=32768 Hz, CPUOFF=1, SCG0=0, SCG1=1, OSCOFF=0 16
Low-power mode 3 supply current (VLO) ILPM3,VLO 0.5 0.7 µA 25°C, VCC 2.2 V; fACLK from VLO, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=0 16
Low-power mode 4 supply current ILPM4 0.1 0.5 µA 25°C, VCC 2.2 V; fACLK=0 Hz, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=1 16
Low-power mode 4 supply current ILPM4 0.8 1.5 µA 85°C, VCC 2.2 V; fACLK=0 Hz, CPUOFF=1, SCG0=1, SCG1=1, OSCOFF=1 16
Positive-going input threshold voltage (Port P1) VIT+ 1.35 2.25 V VCC 3 V 17
Negative-going input threshold voltage (Port P1) VIT- 0.75 1.65 V VCC 3 V 17
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.3 1 V VCC 3 V 17
Pullup/pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 17
High-impedance leakage current (Port P1) Ilkg(Px.y) -50 50 nA VCC 3 V 17
DCO frequency (0, 0) fDCO(0,0) 0.06 0.14 MHz VCC 3 V; RSELx=0, DCOx=0, MODx=0 21
DCO frequency (7, 3) fDCO(7,3) 0.8 1.5 MHz VCC 3 V; RSELx=7, DCOx=3, MODx=0 21
DCO frequency (12, 3) fDCO(12,3) 4.3 7.3 MHz VCC 3 V; RSELx=12, DCOx=3, MODx=0 21
DCO frequency (14, 3) fDCO(14,3) 8.6 13.9 MHz VCC 3 V; RSELx=14, DCOx=3, MODx=0 21
1-MHz tolerance over temperature -3 0.5 3 % 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±0.5 22
8-MHz tolerance over temperature -3 1 3 % 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±1.0 22
12-MHz tolerance over temperature -3 1 3 % 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±1.0 22
16-MHz tolerance over temperature -3 2 3 % 0°C to 85°C, 3 V; calibrated at 30°C and 3 V; typ printed ±2.0 22
1-MHz tolerance over VCC -3 2 3 % 25°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
8-MHz tolerance over VCC -3 2 3 % 25°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
12-MHz tolerance over VCC -3 2 3 % 25°C, 2.2 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
16-MHz tolerance over VCC -6 2 3 % 25°C, 3 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
1-MHz tolerance overall -5 2 5 % -40°C to 85°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
8-MHz tolerance overall -5 2 5 % -40°C to 85°C, 1.8 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
12-MHz tolerance overall -5 2 5 % -40°C to 85°C, 2.2 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±2 22
16-MHz tolerance overall -6 3 6 % -40°C to 85°C, 3 V to 3.6 V; calibrated at 30°C and 3 V; typ printed ±3 22
VLO frequency fVLO 4 12 20 kHz -40°C to 85°C, 3 V 24
Analog supply voltage VCC 2.2 3.6 V VSS = 0 V 27
Positive built-in reference voltage VREF+ 1.41 1.5 1.59 V 3 V; IVREF+ ≤ IVREF+max, REF2_5V = 0 28
Positive built-in reference voltage VREF+ 2.35 2.5 2.65 V 3 V; IVREF+ ≤ IVREF+max, REF2_5V = 1 28
Maximum VREF+ load current ILD,VREF+ -1 1 mA 3 V 28
VREF+ load regulation -2 2 LSB IVREF+ = 500 µA ± 100 µA, VAx ≈ 0.75 V, REF2_5V = 0 28
Temperature coefficient of built-in reference TCREF+ -100 100 ppm/°C IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA, 3 V 28
Positive external reference input voltage range VEREF+ 1.4 3 V VEREF- ≤ VEREF+ ≤ VCC, 0.15 V, SREF1 = 1, SREF0 = 1 29
Positive external reference input voltage range VEREF+ 1.4 V VEREF+ > VEREF-, SREF1 = 1, SREF0 = 0; upper limit printed as VCC 29
Negative external reference input voltage range VEREF- 0 1.2 V VEREF+ > VEREF- 29
Static input current into VEREF+ IVEREF+ -1 1 µA 0 V ≤ VEREF+ ≤ VCC, 3 V, SREF1 = 1, SREF0 = 0 29
Static input current into VEREF- IVEREF- -1 1 µA 0 V ≤ VEREF- ≤ VCC, 3 V 29
ADC10 input clock frequency fADC10CLK 0.45 6.3 MHz ADC10SR = 0, 3 V 29
ADC10 input clock frequency fADC10CLK 0.45 1.5 MHz ADC10SR = 1, 3 V (ADC10 linearity parameters) 29
ADC10 built-in oscillator frequency fADC10OSC 3.7 6.3 MHz ADC10DIVx = 0, ADC10SSELx = 0, fADC10CLK = fADC10OSC, 3 V 29
Conversion time tCONVERT 2.06 3.51 µs ADC10 built-in oscillator, ADC10SSELx = 0, fADC10CLK = fADC10OSC, 3 V 29
Integral linearity error EI -1 1 LSB 3 V 29
Differential linearity error ED -1 1 LSB 3 V 29
Offset error EO -1 1 LSB 3 V; source impedance RS < 100 Ω 29
Gain error EG -2 1.1 2 LSB 3 V; typ printed ±1.1 29
Total unadjusted error ET -5 2 5 LSB 3 V; typ printed ±2 29

CAD (KiCad official)

  • Symbol: MSP430G2230IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: msp430g2230idr-etched.step / msp430g2230idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2230idr.step / msp430g2230idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 97290837e4d73839, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF