main
Ray Publish 0.1.0 c6f049b

MSP430FR50431IPMR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

MSP430FR50431IPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVCC1 power_in Analog power supply; DVCC, AVCC and PVCC should be powered from the same source and kept within 0.3 V of each other, with a supply range of 1.8 V to 3.6 V.
2 P2.2/COUT/UCA0CLK/A14/C14 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with comparator output, eUSCI_A0 clock, ADC input A14 and comparator input C14.
3 P1.0/UCA1CLK/TA1.0/A0/C0/VREF-/VeREF- bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 clock, Timer_A1 CCR0, ADC input A0, comparator input C0 and negative reference VREF-/VeREF-.
4 P1.1/UCA1STE/TA4.0/A1/C1/VREF+/VeREF+ bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 STE, Timer_A4 CCR0, ADC input A1, comparator input C1 and positive reference VREF+/VeREF+.
5 AVSS2 power_in Analog ground supply, to be connected to the common ground with a single-point connection.
6 PJ.4/LFXIN bidirectional General-purpose digital I/O, or input to the low-frequency crystal oscillator LFXT (32 kHz) in crystal or bypass mode.
7 PJ.5/LFXOUT bidirectional General-purpose digital I/O, or output of the low-frequency crystal oscillator LFXT in crystal mode.
8 AVSS3 power_in Analog ground supply.
9 PJ.6/HFXIN/USSXT_BOUT bidirectional General-purpose digital I/O, or input to the high-frequency crystal oscillator HFXT, or buffered USSXT output clock.
10 PJ.7/HFXOUT bidirectional General-purpose digital I/O, or output of the high-frequency crystal oscillator HFXT in crystal mode.
11 TEST/SBWCLK input Test mode pin used to select digital I/O on the JTAG pins; it has an internal pulldown enabled and should be left open when unused.
12 RST/NMI/SBWTDIO bidirectional Active-low reset input (RST), nonmaskable interrupt input (NMI), or Spy-Bi-Wire data I/O; an external 47-kΩ pullup or internal pullup is recommended when used as RST.
13 PJ.0/UAC2CLK/SRSCG1/DMAE0/C10/TDO bidirectional General-purpose digital I/O, or JTAG test data output TDO, also multiplexed with DMA trigger DMAE0 and comparator input C10.
14 PJ.1/UCA2STE/SRSCG0/TA4CLK/C11/TDI/TCLK bidirectional General-purpose digital I/O, or JTAG test data input TDI/TCLK, also multiplexed with eUSCI_A2 STE, Timer_A4 clock and comparator input C11.
15 PJ.2/UCA2SIMO/UCA2TXD/SROSCOFF/TB0OUTH/C12/TMS bidirectional General-purpose digital I/O, or JTAG test mode select TMS, also multiplexed with eUSCI_A2 SIMO/TXD, Timer_B0 output-high control and comparator input C12.
16 PJ.3/UCA2SOMI/UCA2RXD/SRCPUOFF/TB0.6/C13/TCK bidirectional General-purpose digital I/O, or JTAG test clock TCK, also multiplexed with eUSCI_A2 SOMI/RXD, Timer_B0 CCR6 and comparator input C13.
17 DVSS1 power_in Digital ground supply; the datasheet recommends a 100-nF decoupling capacitor per DVCC/DVSS pair placed within a few millimeters of the pins.
18 DVCC1 power_in Digital power supply, 1.8 V to 3.6 V, with a 1-µF plus 100-nF low-ESR decoupling capacitor recommended.
19 P1.2/UCA1SIMO/UCA1TXD/TA1.0/A8/C8 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 SIMO/TXD, Timer_A1 output, ADC input A8 and comparator input C8.
20 P1.3/UCA1SOMI/UCA1RXD/TA1.1/A9/C9 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 SOMI/RXD, Timer_A1 output, ADC input A9 and comparator input C9.
21 P2.0/UCA1CLK/UCA3SIMO/UCA3TXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5; used as BSLTX on devices with UART BSL.
22 P2.1/UCA1STE/UCA3SOMI/UCA3RXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5; used as BSLRX on devices with UART BSL.
23 P1.6/UCA3STE/UCB0SIMO/UCB0SDA bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A3 STE and eUSCI_B0 SIMO/SDA; used as BSLSDA on devices with I2C BSL.
24 P1.7/USSTRG/UCA3CLK/UCB0SOMI/UCB0SCL bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with USS trigger USSTRG, eUSCI_A3 clock and eUSCI_B0 SOMI/SCL; used as BSLSCL on devices with I2C BSL.
25 P1.4/TB0.4/UCB0STE/A2/C2 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR4, eUSCI_B0 STE, ADC input A2 and comparator input C2.
26 P1.5/TB0.5/UCB0CLK/A3/C3 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR5, eUSCI_B0 clock, ADC input A3 and comparator input C3.
27 P3.1/TA1CLK/TB0.1/MTIF_OUT_IN bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A1 clock, Timer_B0 CCR1 and the meter test interface MTIF_OUT_IN.
28 P4.0/RTCCLK/TA4.1/MTIF_PIN_EN bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with RTC clock calibration output RTCCLK, Timer_A4 CCR1 and MTIF_PIN_EN.
29 P4.1/UCA0CLK/TB0.4/UCA3SOMI/UCA3RXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 clock, Timer_B0 CCR4, and eUSCI_A3 SOMI/RXD.
30 P4.2/UCA0STE/TB0.5/UCA3SIMO/UCA3TXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 STE, Timer_B0 CCR5, and eUSCI_A3 SIMO/TXD.
31 P4.3/UCA0SIMO/UCA0TXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 SIMO/TXD.
32 P4.4/UCA0SOMI/UCA0RXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 SOMI/RXD.
33 DVSS2 power_in Digital ground supply.
34 P5.0/TB0.0/UCA2SIMO/UCA2TXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR0, and eUSCI_A2 SIMO/TXD.
35 P5.1/TB0.1/UCA2SOMI/UCA2RXD bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR1, and eUSCI_A2 SOMI/RXD.
36 P5.2/TB0.2/UAC2CLK bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR2 and eUSCI_A2 clock (printed as UAC2CLK).
37 P5.3/TB0.3/UCA2STE bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR3 and eUSCI_A2 STE.
38 P5.4/TA0.0/UCB1CLK/TA4.0 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 CCR0, eUSCI_B1 clock and Timer_A4 CCR0.
39 P5.5/TA4.1/UCB1SIMO/UCB1SDA bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A4 CCR1 and eUSCI_B1 SIMO/SDA.
40 P5.6/TB0OUTH/UCB1SOMI/UCB1SCL bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 output-high control and eUSCI_B1 SOMI/SCL.
41 P5.7/TA0.2/UCB1STE bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 CCR2 and eUSCI_B1 STE.
42 P6.0/TA0CLK/COUT bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 clock and comparator output COUT.
43 P6.4/MCLK bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with MCLK output.
44 P6.5/SMCLK bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with SMCLK output.
45 P6.6/ACLK bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with ACLK output.
46 P7.0/TA1.0/TA1.2/XPB0 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A1 CCR0/CCR2 outputs and external bias output XPB0.
47 P6.2/TB0CLK bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 clock input.
48 DVSS3 power_in Digital ground supply.
49 DVCC3 power_in Digital power supply, 1.8 V to 3.6 V.
50 P3.3/MCLK/TB0.3/XPB1 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with MCLK output, Timer_B0 CCR3 and external bias output XPB1.
51 P3.4/SMCLK/DMAE0 bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with SMCLK output and external DMA trigger DMAE0.
52 P3.5/ACLK/COUT bidirectional General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with ACLK output and comparator output COUT.
53 CH1_IN input USS channel 1 receive input, supplied from PVCC with a maximum of 1.65 V (1.8 V for 10% duty over 1 ms).
54 CH1_OUT bidirectional USS channel 1 transmit output, supplied from PVCC.
55 PVSS power_in USS power-supply ground, to be connected to DVSS for the USS module.
56 PVCC power_in USS power supply, 2.2 V to 3.6 V, decoupled with a 22-µF low-ESR ceramic capacitor minimum.
57 PVCC power_in USS power supply, 2.2 V to 3.6 V, decoupled with a 22-µF low-ESR ceramic capacitor minimum.
58 PVSS power_in USS power-supply ground, to be connected to DVSS for the USS module.
59 CH0_OUT bidirectional USS channel 0 transmit output, supplied from PVCC.
60 CH0_IN input USS channel 0 receive input, supplied from PVCC with a maximum of 1.65 V (1.8 V for 10% duty over 1 ms).
61 AVSS4 power_in Analog ground supply.
62 USSXTIN input Input for the USSXT oscillator; must not be connected to AVCC or DVCC, and no external clock may be driven into it.
63 USSXTOUT output Output of the USSXT oscillator; must not be connected to AVCC or DVCC.
64 AVSS1 power_in Analog ground supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at DVCC and AVCC pins to VSS -0.3 4.1 V 29
Voltage difference between DVCC and AVCC pins -0.3 0.3 V 29
Voltage applied to CHx_IN -0.3 1.65 V 29
Voltage applied to CHx_IN (duty cycle of 10% over 1ms) -0.3 1.8 V duty cycle of 10% over 1ms 29
Voltage applied to USSXTIN (USSXTOUT) -0.3 1.5 V 29
Voltage applied to any other pin -0.3 4.1 V VCC + 0.3 V (4.1 V Max); all voltages referenced to VSS 29
Diode current at any device pin -2 2 mA 29
Storage temperature Tstg -40 125 °C 29
Supply voltage range applied at all DVCC and AVCC pins VCC 1.8 3.6 V applied at all DVCC and AVCC pins 30
Supply voltage range applied at PVCC pin VCC 2.2 3.6 V applied at PVCC pin 30
Operating free-air temperature TA -40 85 °C 30
Processor frequency (maximum MCLK frequency), no FRAM wait states fSYSTEM 0 8 MHz NWAITSx = 0 30
Processor frequency (maximum MCLK frequency), with FRAM wait states fSYSTEM 0 16 MHz NWAITSx = 1 30
LEA processor frequency fLEA 0 16 MHz 30
Maximum ACLK frequency fACLK 50 kHz 30
Maximum SMCLK frequency fSMCLK 16 MHz 30
Positive-going input threshold voltage VIT+ 1.2 1.65 V 2.2 V 46
Positive-going input threshold voltage VIT+ 1.65 2.25 V 3.0 V 46
Negative-going input threshold voltage VIT- 0.55 1 V 2.2 V 46
Negative-going input threshold voltage VIT- 0.75 1.35 V 3.0 V 46
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.44 0.98 V 2.2 V 46
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.6 1.3 V 3.0 V 46
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; For pulldown: VIN = VCC 46
High-impedance input leakage current Ilkg(Px.y) -20 20 nA Refer to notes (2) and (3); 2.2 V, 3.0 V 46
External interrupt timing (external trigger pulse duration to set interrupt flag) t(int) 20 ns Ports with interrupt capability; 2.2 V, 3.0 V 46
External reset pulse duration on RST t(RST) 2 µs 2.2 V, 3.0 V 46
LFXT oscillator duty cycle DCLFXT 30 70 % Measured at ACLK, fLFXT = 32768 Hz 39
Oscillator fault frequency fFault,LFXT 0 3500 Hz 39
VLO frequency fVLO 6 9.4 14 kHz Measured at ACLK 42
VLO duty cycle fVLO,DC 40 50 60 % Measured at ACLK 42
MODOSC frequency fMODOSC 4 4.8 5.4 MHz 43
MODOSC duty cycle DCMODOSC 40 50 60 % Duty cycle (excl. first clock cycle); measured at SMCLK, divide by 1 43
DCO frequency range 1 MHz, trimmed (tolerance) fDCO1 -3.5 3.5 % Measured at SMCLK, divide by 1, DCORSEL = 0, DCOFSEL = 0, DCORSEL = 1, DCOFSEL = 0 42
DCO frequency range 8 MHz, trimmed (tolerance) fDCO8 -3.5 3.5 % Measured at SMCLK, divide by 1, DCORSEL = 0, DCOFSEL = 6, DCORSEL = 1, DCOFSEL = 3 42
DCO duty cycle fDCO,DC 48 50 52 % Measured at SMCLK, divide by 1, no external divide 42
Timer_A input clock frequency fTA 16 MHz Internal: SMCLK or ACLK, External: TACLK, duty cycle 50% ±10%; 2.2 V, 3.0 V 49
eUSCI input clock frequency (UART mode) feUSCI 16 MHz Internal: SMCLK or ACLK, External: UCLK, duty cycle 50% ±10% 50
BITCLK clock frequency (equals baud rate in MBaud) fBITCLK 4 MHz 50
SCL clock frequency (eUSCI I2C mode) fSCL 0 400 kHz 2.2 V, 3.0 V 55
Operating supply current into AVCC and DVCC terminals, single-ended mode I(ADC12_B) 145 199 µA 3.0 V; fADC12CLK = MODCLK, ADC12ON = 1, ADC12PWRMD = 0, ADC12DIF = 0, REFON = 0, ADC12SHTx = 0, ADC12DIV = 0 58
Input capacitance CI 10 15 pF 2.2 V; only one terminal Ax can be selected at one time 58
Input MUX ON resistance RI 0.5 4 kΩ 0 V ≤ V(Ax) ≤ AVCC; >2 V 58
Input MUX ON resistance RI 1 10 kΩ 0 V ≤ V(Ax) ≤ AVCC; <2 V 58
Positive built-in reference voltage output tolerance (2.5 V) VREF+ -1.5 1.5 % REFVSEL = {2} for 2.5 V, REFON = 1, VCC 2.7 V 63
Positive built-in reference voltage output tolerance (2.0 V) VREF+ -1.5 1.5 % REFVSEL = {1} for 2.0 V, REFON = 1, VCC 2.2 V 63
Positive built-in reference voltage output tolerance (1.2 V) VREF+ -1.8 1.8 % REFVSEL = {0} for 1.2 V, REFON = 1, VCC 1.8 V 63
Temperature coefficient of built-in reference TCREF+ 24 50 ppm/K REFVSEL = {0, 1, 2}, REFON = REFOUT = 1, TA = -40°C to 85°C 63
Operating supply current into AVCC terminal (built-in reference) IREF+ 19 26 µA REFON = 1, 3 V 63
Input offset voltage VOFFSET -16 16 mV CEPWRMD = 00 64
Input offset voltage VOFFSET -12 12 mV CEPWRMD = 01 64
Input offset voltage VOFFSET -37 37 mV CEPWRMD = 10 64
VVCC_BOR- brownout power-down level VVCC_BOR- 0.7 1.66 V /dDVCC/dt/ < 3 V/s 38
VVCC_BOR+ brownout power-up level VVCC_BOR+ 0.79 1.68 V /dDVCC/dt/ < 3 V/s 38
SVSH power-down level VSVSH- 1.75 1.8 1.85 V 38
SVSH power-up level VSVSH+ 1.77 1.88 1.99 V 38
SVSH hysteresis VSVSH_hys 40 120 mV 38
UART mode eUSCI_A module current 6.3 7 µA/MHz UART mode; module input clock 37
LEA 256-point complex FFT current 70 78 85 µA/MHz 256-point complex FFT, data = non-zero; MCLK 37
Junction-to-ambient thermal resistance, still air (QFP-64 PM) RθJA 56.6 °C/W 37
Junction-to-case (top) thermal resistance (QFP-64 PM) RθJC(TOP) 16.4 °C/W 37
Junction-to-board thermal resistance (QFP-64 PM) RθJB 27.8 °C/W 37

CAD (KiCad official)

  • Symbol: MSP430FR50431IPMR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: msp430fr50431ipmr-etched.step / msp430fr50431ipmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430fr50431ipmr.step / msp430fr50431ipmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (196 pp, sha256 fa67b9472dc353be, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF