3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430FR50431IPMR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
MSP430FR50431IPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVCC1 | power_in | Analog power supply; DVCC, AVCC and PVCC should be powered from the same source and kept within 0.3 V of each other, with a supply range of 1.8 V to 3.6 V. |
| 2 | P2.2/COUT/UCA0CLK/A14/C14 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with comparator output, eUSCI_A0 clock, ADC input A14 and comparator input C14. |
| 3 | P1.0/UCA1CLK/TA1.0/A0/C0/VREF-/VeREF- | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 clock, Timer_A1 CCR0, ADC input A0, comparator input C0 and negative reference VREF-/VeREF-. |
| 4 | P1.1/UCA1STE/TA4.0/A1/C1/VREF+/VeREF+ | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 STE, Timer_A4 CCR0, ADC input A1, comparator input C1 and positive reference VREF+/VeREF+. |
| 5 | AVSS2 | power_in | Analog ground supply, to be connected to the common ground with a single-point connection. |
| 6 | PJ.4/LFXIN | bidirectional | General-purpose digital I/O, or input to the low-frequency crystal oscillator LFXT (32 kHz) in crystal or bypass mode. |
| 7 | PJ.5/LFXOUT | bidirectional | General-purpose digital I/O, or output of the low-frequency crystal oscillator LFXT in crystal mode. |
| 8 | AVSS3 | power_in | Analog ground supply. |
| 9 | PJ.6/HFXIN/USSXT_BOUT | bidirectional | General-purpose digital I/O, or input to the high-frequency crystal oscillator HFXT, or buffered USSXT output clock. |
| 10 | PJ.7/HFXOUT | bidirectional | General-purpose digital I/O, or output of the high-frequency crystal oscillator HFXT in crystal mode. |
| 11 | TEST/SBWCLK | input | Test mode pin used to select digital I/O on the JTAG pins; it has an internal pulldown enabled and should be left open when unused. |
| 12 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (RST), nonmaskable interrupt input (NMI), or Spy-Bi-Wire data I/O; an external 47-kΩ pullup or internal pullup is recommended when used as RST. |
| 13 | PJ.0/UAC2CLK/SRSCG1/DMAE0/C10/TDO | bidirectional | General-purpose digital I/O, or JTAG test data output TDO, also multiplexed with DMA trigger DMAE0 and comparator input C10. |
| 14 | PJ.1/UCA2STE/SRSCG0/TA4CLK/C11/TDI/TCLK | bidirectional | General-purpose digital I/O, or JTAG test data input TDI/TCLK, also multiplexed with eUSCI_A2 STE, Timer_A4 clock and comparator input C11. |
| 15 | PJ.2/UCA2SIMO/UCA2TXD/SROSCOFF/TB0OUTH/C12/TMS | bidirectional | General-purpose digital I/O, or JTAG test mode select TMS, also multiplexed with eUSCI_A2 SIMO/TXD, Timer_B0 output-high control and comparator input C12. |
| 16 | PJ.3/UCA2SOMI/UCA2RXD/SRCPUOFF/TB0.6/C13/TCK | bidirectional | General-purpose digital I/O, or JTAG test clock TCK, also multiplexed with eUSCI_A2 SOMI/RXD, Timer_B0 CCR6 and comparator input C13. |
| 17 | DVSS1 | power_in | Digital ground supply; the datasheet recommends a 100-nF decoupling capacitor per DVCC/DVSS pair placed within a few millimeters of the pins. |
| 18 | DVCC1 | power_in | Digital power supply, 1.8 V to 3.6 V, with a 1-µF plus 100-nF low-ESR decoupling capacitor recommended. |
| 19 | P1.2/UCA1SIMO/UCA1TXD/TA1.0/A8/C8 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 SIMO/TXD, Timer_A1 output, ADC input A8 and comparator input C8. |
| 20 | P1.3/UCA1SOMI/UCA1RXD/TA1.1/A9/C9 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A1 SOMI/RXD, Timer_A1 output, ADC input A9 and comparator input C9. |
| 21 | P2.0/UCA1CLK/UCA3SIMO/UCA3TXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5; used as BSLTX on devices with UART BSL. |
| 22 | P2.1/UCA1STE/UCA3SOMI/UCA3RXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5; used as BSLRX on devices with UART BSL. |
| 23 | P1.6/UCA3STE/UCB0SIMO/UCB0SDA | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A3 STE and eUSCI_B0 SIMO/SDA; used as BSLSDA on devices with I2C BSL. |
| 24 | P1.7/USSTRG/UCA3CLK/UCB0SOMI/UCB0SCL | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with USS trigger USSTRG, eUSCI_A3 clock and eUSCI_B0 SOMI/SCL; used as BSLSCL on devices with I2C BSL. |
| 25 | P1.4/TB0.4/UCB0STE/A2/C2 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR4, eUSCI_B0 STE, ADC input A2 and comparator input C2. |
| 26 | P1.5/TB0.5/UCB0CLK/A3/C3 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR5, eUSCI_B0 clock, ADC input A3 and comparator input C3. |
| 27 | P3.1/TA1CLK/TB0.1/MTIF_OUT_IN | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A1 clock, Timer_B0 CCR1 and the meter test interface MTIF_OUT_IN. |
| 28 | P4.0/RTCCLK/TA4.1/MTIF_PIN_EN | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with RTC clock calibration output RTCCLK, Timer_A4 CCR1 and MTIF_PIN_EN. |
| 29 | P4.1/UCA0CLK/TB0.4/UCA3SOMI/UCA3RXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 clock, Timer_B0 CCR4, and eUSCI_A3 SOMI/RXD. |
| 30 | P4.2/UCA0STE/TB0.5/UCA3SIMO/UCA3TXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 STE, Timer_B0 CCR5, and eUSCI_A3 SIMO/TXD. |
| 31 | P4.3/UCA0SIMO/UCA0TXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 SIMO/TXD. |
| 32 | P4.4/UCA0SOMI/UCA0RXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with eUSCI_A0 SOMI/RXD. |
| 33 | DVSS2 | power_in | Digital ground supply. |
| 34 | P5.0/TB0.0/UCA2SIMO/UCA2TXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR0, and eUSCI_A2 SIMO/TXD. |
| 35 | P5.1/TB0.1/UCA2SOMI/UCA2RXD | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR1, and eUSCI_A2 SOMI/RXD. |
| 36 | P5.2/TB0.2/UAC2CLK | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR2 and eUSCI_A2 clock (printed as UAC2CLK). |
| 37 | P5.3/TB0.3/UCA2STE | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 CCR3 and eUSCI_A2 STE. |
| 38 | P5.4/TA0.0/UCB1CLK/TA4.0 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 CCR0, eUSCI_B1 clock and Timer_A4 CCR0. |
| 39 | P5.5/TA4.1/UCB1SIMO/UCB1SDA | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A4 CCR1 and eUSCI_B1 SIMO/SDA. |
| 40 | P5.6/TB0OUTH/UCB1SOMI/UCB1SCL | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 output-high control and eUSCI_B1 SOMI/SCL. |
| 41 | P5.7/TA0.2/UCB1STE | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 CCR2 and eUSCI_B1 STE. |
| 42 | P6.0/TA0CLK/COUT | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A0 clock and comparator output COUT. |
| 43 | P6.4/MCLK | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with MCLK output. |
| 44 | P6.5/SMCLK | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with SMCLK output. |
| 45 | P6.6/ACLK | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with ACLK output. |
| 46 | P7.0/TA1.0/TA1.2/XPB0 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_A1 CCR0/CCR2 outputs and external bias output XPB0. |
| 47 | P6.2/TB0CLK | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with Timer_B0 clock input. |
| 48 | DVSS3 | power_in | Digital ground supply. |
| 49 | DVCC3 | power_in | Digital power supply, 1.8 V to 3.6 V. |
| 50 | P3.3/MCLK/TB0.3/XPB1 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with MCLK output, Timer_B0 CCR3 and external bias output XPB1. |
| 51 | P3.4/SMCLK/DMAE0 | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with SMCLK output and external DMA trigger DMAE0. |
| 52 | P3.5/ACLK/COUT | bidirectional | General-purpose digital I/O with port interrupt and wakeup from LPMx.5, multiplexed with ACLK output and comparator output COUT. |
| 53 | CH1_IN | input | USS channel 1 receive input, supplied from PVCC with a maximum of 1.65 V (1.8 V for 10% duty over 1 ms). |
| 54 | CH1_OUT | bidirectional | USS channel 1 transmit output, supplied from PVCC. |
| 55 | PVSS | power_in | USS power-supply ground, to be connected to DVSS for the USS module. |
| 56 | PVCC | power_in | USS power supply, 2.2 V to 3.6 V, decoupled with a 22-µF low-ESR ceramic capacitor minimum. |
| 57 | PVCC | power_in | USS power supply, 2.2 V to 3.6 V, decoupled with a 22-µF low-ESR ceramic capacitor minimum. |
| 58 | PVSS | power_in | USS power-supply ground, to be connected to DVSS for the USS module. |
| 59 | CH0_OUT | bidirectional | USS channel 0 transmit output, supplied from PVCC. |
| 60 | CH0_IN | input | USS channel 0 receive input, supplied from PVCC with a maximum of 1.65 V (1.8 V for 10% duty over 1 ms). |
| 61 | AVSS4 | power_in | Analog ground supply. |
| 62 | USSXTIN | input | Input for the USSXT oscillator; must not be connected to AVCC or DVCC, and no external clock may be driven into it. |
| 63 | USSXTOUT | output | Output of the USSXT oscillator; must not be connected to AVCC or DVCC. |
| 64 | AVSS1 | power_in | Analog ground supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at DVCC and AVCC pins to VSS | -0.3 | 4.1 | V | 29 | |||
| Voltage difference between DVCC and AVCC pins | -0.3 | 0.3 | V | 29 | |||
| Voltage applied to CHx_IN | -0.3 | 1.65 | V | 29 | |||
| Voltage applied to CHx_IN (duty cycle of 10% over 1ms) | -0.3 | 1.8 | V | duty cycle of 10% over 1ms | 29 | ||
| Voltage applied to USSXTIN (USSXTOUT) | -0.3 | 1.5 | V | 29 | |||
| Voltage applied to any other pin | -0.3 | 4.1 | V | VCC + 0.3 V (4.1 V Max); all voltages referenced to VSS | 29 | ||
| Diode current at any device pin | -2 | 2 | mA | 29 | |||
| Storage temperature | Tstg | -40 | 125 | °C | 29 | ||
| Supply voltage range applied at all DVCC and AVCC pins | VCC | 1.8 | 3.6 | V | applied at all DVCC and AVCC pins | 30 | |
| Supply voltage range applied at PVCC pin | VCC | 2.2 | 3.6 | V | applied at PVCC pin | 30 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 30 | ||
| Processor frequency (maximum MCLK frequency), no FRAM wait states | fSYSTEM | 0 | 8 | MHz | NWAITSx = 0 | 30 | |
| Processor frequency (maximum MCLK frequency), with FRAM wait states | fSYSTEM | 0 | 16 | MHz | NWAITSx = 1 | 30 | |
| LEA processor frequency | fLEA | 0 | 16 | MHz | 30 | ||
| Maximum ACLK frequency | fACLK | 50 | kHz | 30 | |||
| Maximum SMCLK frequency | fSMCLK | 16 | MHz | 30 | |||
| Positive-going input threshold voltage | VIT+ | 1.2 | 1.65 | V | 2.2 V | 46 | |
| Positive-going input threshold voltage | VIT+ | 1.65 | 2.25 | V | 3.0 V | 46 | |
| Negative-going input threshold voltage | VIT- | 0.55 | 1 | V | 2.2 V | 46 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.35 | V | 3.0 V | 46 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.44 | 0.98 | V | 2.2 V | 46 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.6 | 1.3 | V | 3.0 V | 46 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; For pulldown: VIN = VCC | 46 |
| High-impedance input leakage current | Ilkg(Px.y) | -20 | 20 | nA | Refer to notes (2) and (3); 2.2 V, 3.0 V | 46 | |
| External interrupt timing (external trigger pulse duration to set interrupt flag) | t(int) | 20 | ns | Ports with interrupt capability; 2.2 V, 3.0 V | 46 | ||
| External reset pulse duration on RST | t(RST) | 2 | µs | 2.2 V, 3.0 V | 46 | ||
| LFXT oscillator duty cycle | DCLFXT | 30 | 70 | % | Measured at ACLK, fLFXT = 32768 Hz | 39 | |
| Oscillator fault frequency | fFault,LFXT | 0 | 3500 | Hz | 39 | ||
| VLO frequency | fVLO | 6 | 9.4 | 14 | kHz | Measured at ACLK | 42 |
| VLO duty cycle | fVLO,DC | 40 | 50 | 60 | % | Measured at ACLK | 42 |
| MODOSC frequency | fMODOSC | 4 | 4.8 | 5.4 | MHz | 43 | |
| MODOSC duty cycle | DCMODOSC | 40 | 50 | 60 | % | Duty cycle (excl. first clock cycle); measured at SMCLK, divide by 1 | 43 |
| DCO frequency range 1 MHz, trimmed (tolerance) | fDCO1 | -3.5 | 3.5 | % | Measured at SMCLK, divide by 1, DCORSEL = 0, DCOFSEL = 0, DCORSEL = 1, DCOFSEL = 0 | 42 | |
| DCO frequency range 8 MHz, trimmed (tolerance) | fDCO8 | -3.5 | 3.5 | % | Measured at SMCLK, divide by 1, DCORSEL = 0, DCOFSEL = 6, DCORSEL = 1, DCOFSEL = 3 | 42 | |
| DCO duty cycle | fDCO,DC | 48 | 50 | 52 | % | Measured at SMCLK, divide by 1, no external divide | 42 |
| Timer_A input clock frequency | fTA | 16 | MHz | Internal: SMCLK or ACLK, External: TACLK, duty cycle 50% ±10%; 2.2 V, 3.0 V | 49 | ||
| eUSCI input clock frequency (UART mode) | feUSCI | 16 | MHz | Internal: SMCLK or ACLK, External: UCLK, duty cycle 50% ±10% | 50 | ||
| BITCLK clock frequency (equals baud rate in MBaud) | fBITCLK | 4 | MHz | 50 | |||
| SCL clock frequency (eUSCI I2C mode) | fSCL | 0 | 400 | kHz | 2.2 V, 3.0 V | 55 | |
| Operating supply current into AVCC and DVCC terminals, single-ended mode | I(ADC12_B) | 145 | 199 | µA | 3.0 V; fADC12CLK = MODCLK, ADC12ON = 1, ADC12PWRMD = 0, ADC12DIF = 0, REFON = 0, ADC12SHTx = 0, ADC12DIV = 0 | 58 | |
| Input capacitance | CI | 10 | 15 | pF | 2.2 V; only one terminal Ax can be selected at one time | 58 | |
| Input MUX ON resistance | RI | 0.5 | 4 | kΩ | 0 V ≤ V(Ax) ≤ AVCC; >2 V | 58 | |
| Input MUX ON resistance | RI | 1 | 10 | kΩ | 0 V ≤ V(Ax) ≤ AVCC; <2 V | 58 | |
| Positive built-in reference voltage output tolerance (2.5 V) | VREF+ | -1.5 | 1.5 | % | REFVSEL = {2} for 2.5 V, REFON = 1, VCC 2.7 V | 63 | |
| Positive built-in reference voltage output tolerance (2.0 V) | VREF+ | -1.5 | 1.5 | % | REFVSEL = {1} for 2.0 V, REFON = 1, VCC 2.2 V | 63 | |
| Positive built-in reference voltage output tolerance (1.2 V) | VREF+ | -1.8 | 1.8 | % | REFVSEL = {0} for 1.2 V, REFON = 1, VCC 1.8 V | 63 | |
| Temperature coefficient of built-in reference | TCREF+ | 24 | 50 | ppm/K | REFVSEL = {0, 1, 2}, REFON = REFOUT = 1, TA = -40°C to 85°C | 63 | |
| Operating supply current into AVCC terminal (built-in reference) | IREF+ | 19 | 26 | µA | REFON = 1, 3 V | 63 | |
| Input offset voltage | VOFFSET | -16 | 16 | mV | CEPWRMD = 00 | 64 | |
| Input offset voltage | VOFFSET | -12 | 12 | mV | CEPWRMD = 01 | 64 | |
| Input offset voltage | VOFFSET | -37 | 37 | mV | CEPWRMD = 10 | 64 | |
| VVCC_BOR- brownout power-down level | VVCC_BOR- | 0.7 | 1.66 | V | /dDVCC/dt/ < 3 V/s | 38 | |
| VVCC_BOR+ brownout power-up level | VVCC_BOR+ | 0.79 | 1.68 | V | /dDVCC/dt/ < 3 V/s | 38 | |
| SVSH power-down level | VSVSH- | 1.75 | 1.8 | 1.85 | V | 38 | |
| SVSH power-up level | VSVSH+ | 1.77 | 1.88 | 1.99 | V | 38 | |
| SVSH hysteresis | VSVSH_hys | 40 | 120 | mV | 38 | ||
| UART mode eUSCI_A module current | 6.3 | 7 | µA/MHz | UART mode; module input clock | 37 | ||
| LEA 256-point complex FFT current | 70 | 78 | 85 | µA/MHz | 256-point complex FFT, data = non-zero; MCLK | 37 | |
| Junction-to-ambient thermal resistance, still air (QFP-64 PM) | RθJA | 56.6 | °C/W | 37 | |||
| Junction-to-case (top) thermal resistance (QFP-64 PM) | RθJC(TOP) | 16.4 | °C/W | 37 | |||
| Junction-to-board thermal resistance (QFP-64 PM) | RθJB | 27.8 | °C/W | 37 |
CAD (KiCad official)
- Symbol:
MSP430FR50431IPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
msp430fr50431ipmr-etched.step/msp430fr50431ipmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr50431ipmr.step/msp430fr50431ipmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (196 pp, sha256
fa67b9472dc353be, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).