main
Ray Publish 0.1.0 d767570

MSP430FR2475TRHBR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-32-EP(5x5)

MSP430FR2475TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST/NMI/SBWTDIO bidirectional Active-low reset input with pullup enabled after BOR, which can also be configured as NMI or as the Spy-Bi-Wire data input/output (SBWTDIO); unused use requires a 47-kΩ pullup or internal pullup with a 10-nF pulldown.
2 TEST/SBWTCK input Test mode pin that is the Spy-Bi-Wire input clock (SBWTCK) and has an internal pulldown that is always enabled; leave open if unused.
3 P1.4/UCA0TXD/UCA0SIMO/TA1.2/TCK/A4/VREF+ bidirectional General-purpose I/O P1.4 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 UART/SPI transmit, Timer_A1 CCR2, JTAG TCK, ADC input A4 and VREF+ output.
4 P1.5/UCA0RXD/UCA0SOMI/TA1.1/TMS/A5 bidirectional General-purpose I/O P1.5 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 UART/SPI receive, Timer_A1 CCR1, JTAG TMS and ADC input A5.
5 P1.6/UCA0CLK/TA1CLK/TDI/TCLK/A6 bidirectional General-purpose I/O P1.6 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 clock, Timer_A1 clock input, JTAG TDI/TCLK and ADC input A6.
6 P1.7/UCA0STE/SMCLK/TDO/A7 bidirectional General-purpose I/O P1.7 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 STE, SMCLK output, JTAG TDO and ADC input A7.
7 P1.0/UCB0STE/TA0CLK/A0/Veref+ bidirectional General-purpose I/O P1.0 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 STE, Timer_A0 clock input, ADC input A0 and ADC positive reference Veref+.
8 P1.1/UCB0CLK/TA0.1/COMP0.0/A1 bidirectional General-purpose I/O P1.1 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 clock, Timer_A0 CCR1, eCOMP0 input channel C0 and ADC input A1.
9 P1.2/UCB0SIMO/UCB0SDA/TA0.2/A2/Veref- bidirectional General-purpose I/O P1.2 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 SIMO/SDA, Timer_A0 CCR2, ADC input A2 and ADC negative reference Veref-.
10 P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 bidirectional General-purpose I/O P1.3 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 SOMI/SCL, MCLK output and ADC input A3.
11 P2.2/ACLK/COMP0.1 bidirectional General-purpose I/O P2.2 with port interrupt and wake from LPMx.5, multiplexed with ACLK output and eCOMP0 input channel C1.
12 P3.0/TA2.2 bidirectional General-purpose I/O P3.0, multiplexed with Timer_A2 CCR2 capture/compare output (remap alternative P6.0).
13 P3.3/TA2.1 bidirectional General-purpose I/O P3.3, multiplexed with Timer_A2 CCR1 capture/compare output (remap alternative P5.7).
14 P2.3/TA2.0 bidirectional General-purpose I/O P2.3, multiplexed with Timer_A2 CCR0 capture/compare output (remap alternative P5.6).
15 P3.4/TA2CLK/COMP0OUT bidirectional General-purpose I/O P3.4, multiplexed with Timer_A2 clock input and eCOMP0 output COUT.
16 P3.1/UCA1STE bidirectional General-purpose I/O P3.1, multiplexed with eUSCI_A1 STE.
17 P2.4/UCA1CLK bidirectional General-purpose I/O P2.4, multiplexed with eUSCI_A1 clock.
18 P2.5/UCA1RXD/UCA1SOMI bidirectional General-purpose I/O P2.5, multiplexed with eUSCI_A1 UART receive or SPI SOMI.
19 P2.6/UCA1TXD/UCA1SIMO bidirectional General-purpose I/O P2.6, multiplexed with eUSCI_A1 UART transmit or SPI SIMO.
20 DNC unconnected Do not connect; leave this pin unconnected.
21 P3.7/TA3.2 bidirectional General-purpose I/O P3.7, multiplexed with Timer_A3 CCR2 capture/compare output (remap alternative P4.5).
22 P4.0/TA3.1 bidirectional General-purpose I/O P4.0, multiplexed with Timer_A3 CCR1 capture/compare output (remap alternative P4.6).
23 P4.1/TA3.0 bidirectional General-purpose I/O P4.1, multiplexed with Timer_A3 CCR0 capture/compare output (remap alternative P5.3).
24 P4.2/TA3CLK bidirectional General-purpose I/O P4.2, multiplexed with Timer_A3 clock input (remap alternative P5.4).
25 P2.7/UCB1STE bidirectional General-purpose I/O P2.7, multiplexed with eUSCI_B1 STE.
26 P3.5/UCB1CLK/TB0TRG bidirectional General-purpose I/O P3.5, multiplexed with eUSCI_B1 clock and the Timer_B0 external high-impedance trigger input TB0TRG.
27 P3.2/UCB1SIMO/UCB1SDA bidirectional General-purpose I/O P3.2, multiplexed with eUSCI_B1 SIMO or I2C SDA.
28 P3.6/UCB1SOMI/UCB1SCL bidirectional General-purpose I/O P3.6, multiplexed with eUSCI_B1 SOMI or I2C SCL.
29 P2.0/XOUT bidirectional General-purpose I/O P2.0, multiplexed with the 32-kHz crystal oscillator output XOUT.
30 P2.1/XIN bidirectional General-purpose I/O P2.1, multiplexed with the 32-kHz crystal oscillator input XIN, which can also accept a digital clock in XT1BYPASS mode.
31 DVSS power_in Digital ground supply pin; recommended supply range 0 V to ground reference for the device.
32 DVCC power_in Digital supply voltage pin, 1.8 V to 3.6 V per recommended operating conditions, with 10-µF plus 100-nF decoupling recommended.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32-EP(5x5)
Category Single Chip Microcomputer/Microcontroller
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage applied at DVCC pin VCC 1.8 3.6 V 20
Operating free-air temperature TA -40 105 °C 20
Operating junction temperature TJ -40 115 °C 20
Recommended capacitor at DVCC CDVCC 4.7 10 µF 20
Capacitor tolerance at DVCC -20 20 % 20
Processor frequency (MCLK) no FRAM wait states fSYSTEM 0 8 MHz NWAITSx = 0 20
Processor frequency (MCLK) with FRAM wait states fSYSTEM 0 16 MHz NWAITSx = 1 20
Voltage applied at DVCC pin to VSS -0.3 4.1 V 20
Voltage applied to any other pin -0.3 V VCC + 0.3 (4.1 V Max) 20
Diode current at any device pin -2 2 mA 20
Junction temperature, TJ TJ 115 °C 20
Storage temperature, Tstg Tstg -40 125 °C 20
Human-body model ESD (HBM) V(ESD) -1000 1000 V ANSI/ESDA/JEDEC JS-001 20
Charged-device model ESD (CDM) V(ESD) -250 250 V JEDEC JESD22-C101 20
Junction-to-ambient thermal resistance VQFN 32 pin (RHB) RθJA 30.8 °C/W still air, JEDEC 2S2P 25
Junction-to-case (top) thermal resistance VQFN 32 pin (RHB) RθJC 20.8 °C/W 25
Junction-to-board thermal resistance VQFN 32 pin (RHB) RθJB 11.6 °C/W 25
Positive-going input threshold voltage VIT+ 0.9 1.5 V VCC = 2 V 31
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3 V 31
Negative-going input threshold voltage VIT- 0.5 1.1 V VCC = 2 V 31
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 31
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.3 0.8 V VCC = 2 V 31
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.4 1.2 V VCC = 3 V 31
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; For pulldown: VIN = VCC 31
High-impedance leakage current of GPIO pins Ilkg(Px.y) -20 20 nA VCC = 2 V, 3 V 31
High-level output voltage VOH 1.4 2 V I(OHmax) = -3 mA, VCC = 2 V 31
High-level output voltage VOH 2.4 3 V I(OHmax) = -5 mA, VCC = 3 V 31
Low-level output voltage VOL 0 0.6 V I(OLmax) = 3 mA, VCC = 2 V 31
Timer_A input clock frequency fTA 16 MHz Internal: SMCLK, ACLK; External: TACLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V 34
Timer_A capture timing tTA,cap 20 ns All capture inputs, minimum pulse duration required for capture; VCC 2 V, 3 V 34
Timer_B input clock frequency fTB 16 MHz Internal: SMCLK, ACLK; External: TBCLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V 34
Timer_B capture timing tTB,cap 20 ns All capture inputs, minimum pulse duration required for capture; VCC 2 V, 3 V 34
eUSCI input clock frequency (UART mode) feUSCI 16 MHz Internal: SMCLK, MODCLK; External: UCLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V 35
BITCLK clock frequency (equals baud rate in Mbaud) fBITCLK 5 MHz VCC 2 V, 3 V 35
eUSCI input clock frequency (SPI master mode) feUSCI 8 MHz Internal: SMCLK, MODCLK; Duty cycle = 50% ±10% 35
SOMI input data setup time tSU,MI 58 ns VCC = 2 V 35
SOMI input data setup time tSU,MI 40 ns VCC = 3 V 35
SIMO output data valid time tVALID,MO 20 ns UCLK edge to SIMO valid, CL = 20 pF, VCC = 2 V 35
Integral linearity error (12-bit mode) EI -2.5 2.5 LSB Veref+ reference 2.4 V to 3.6 V 41
Integral linearity error (10-bit mode) EI -2 2 LSB Veref+ reference 2.4 V to 3.6 V 41
Differential linearity error (12-bit mode) ED -1 1.5 LSB Veref+ reference 2.4 V to 3.6 V 41
Differential linearity error (10-bit mode) ED -1 1.5 LSB Veref+ reference 2.4 V to 3.6 V 41
Offset error (12-bit mode) EO -4 4 mV Veref+ reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
Offset error (10-bit mode) EO -4 4 mV Veref+ reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
Gain error (12-bit mode) EG -9 9 LSB Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
Gain error (10-bit mode) EG -3 3 LSB Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
Total unadjusted error (12-bit mode) ET -5 5 LSB Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
Total unadjusted error (10-bit mode) ET -2 2 LSB Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V 41
eCOMP supply voltage VCC 2 3.6 V 42
Input offset voltage VOFFSET -30 30 mV CPEN = 1, CPMSEL = 0 42
Input offset voltage VOFFSET -40 40 mV CPEN = 1, CPMSEL = 1 42
Integral nonlinearity INL -0.5 0.5 LSB 42
Differential nonlinearity DNL -0.5 0.5 LSB 42
Data retention duration tRetention 100 years TJ = 25°C 43
Data retention duration tRetention 40 years TJ = 70°C 43
Data retention duration tRetention 10 years TJ = 95°C 43
Spy-Bi-Wire input frequency fSBW 0 8 MHz 2.2 V, 3.0 V 43
Spy-Bi-Wire low clock pulse duration tSBW,Low 0.04 15 µs 2.2 V, 3.0 V 43
Spy-Bi-Wire return to normal operation time tSBW,Rst 15 100 µs 43
Internal pulldown resistance on TEST Rinternal 20 35 50 kΩ 2.2 V, 3.0 V 43
TCK input frequency, 4-wire JTAG fTCK 0 10 MHz 2.2 V and 3.0 V 43
TCLK/MCLK frequency during JTAG access, no FRAM access fTCLK 16 MHz limited by fSYSTEM 43
TCLK low or high clock pulse duration, no FRAM access tTCLK,Low/High 25 ns 43
TCLK/MCLK frequency during JTAG access, including FRAM access fTCLK,FRAM 4 MHz limited by fSYSTEM with no FRAM wait states 43
TCLK low or high clock pulse duration, including FRAM accesses tTCLK,FRAM,Low/High 100 ns 43
Safe BOR power-down level VBOR,safe 0.1 V 25
SVSH power-down level VSVSH- 1.71 1.8 1.87 V 25
SVSH power-up level VSVSH+ 1.76 1.88 1.99 V 25
SVSH propagation delay, active mode tPD,SVSH, AM 10 µs 25
SVSH propagation delay, low-power modes tPD,SVSH, LPM 100 µs 25
Additional wake-up time to activate the FRAM in AM tWAKE-UP FRAM 10 µs VCC = 3 V 26
Wake-up time from LPM3 to active mode tWAKE-UP LPM3 10 µs VCC = 3 V 26
Wake-up time from LPM4 to active mode tWAKE-UP LPM4 10 µs VCC = 3 V 26
Wake-up time from LPM3.5 to active mode tWAKE-UP LPM3.5 350 µs VCC = 3 V 26
Wake-up time from LPM4.5 to active mode tWAKE-UP LPM4.5 350 µs SVSHE = 1, VCC = 3 V 26
Wake-up time from LPM4.5 to active mode tWAKE-UP LPM4.5 1 ms SVSHE = 0, VCC = 3 V 26
Wake-up time from RST or BOR event to active mode tWAKE-UP-RESET 1 ms VCC = 3 V 26
Pulse duration required at RST/NMI pin to accept a reset tRESET 2 µs VCC = 3 V 26
LFXT duty cycle DCXT1 30 70 % Measured at MCLK, fLFXT = 32768 Hz 27
LFXT oscillator logic-level square-wave input duty cycle DCXT1,SW 40 60 % LFXTBYPASS = 1 27
Oscillation allowance for LF crystals OALFXT 200 kΩ LFXTBYPASS = 0, LFXTDRIVE = {3}, fLFXT = 32768 Hz, CL,eff = 12.5 pF 27
Oscillator fault frequency fFault,LFXT 0 3500 Hz XTS = 0 27
FLL lock frequency, 16 MHz, 25°C fDCO,FLL -1 1 % Measured at MCLK, internal trimmed REFO as reference, 3 V 28
FLL lock frequency, 16 MHz, -40°C to 105°C fDCO,FLL -3 3 % 3 V 28
FLL lock frequency, 16 MHz, -40°C to 105°C, XT1 reference fDCO,FLL -0.5 0.5 % Measured at MCLK, XT1 crystal as reference, 3 V 28
Duty cycle fDUTY 40 50 60 % Measured at MCLK, XT1 crystal as reference, 3 V 28
REFO absolute calibrated tolerance fREFO -3.5 3.5 % -40°C to 105°C, 1.8 V to 3.6 V 30
REFO frequency temperature drift dfREFO/dT 0.01 %/°C Measured at MCLK, 3 V 30
REFO frequency supply voltage drift dfREFO/dVCC 1 %/V Measured at MCLK at 25°C, 1.8 V to 3.6 V 30
REFO duty cycle fDC 40 50 60 % Measured at MCLK, 1.8 V to 3.6 V 30
VLO frequency fVLO 10 kHz Measured at MCLK, 3 V 30
VLO frequency temperature drift dfVLO/dT 0.5 %/°C Measured at MCLK, 3 V 30
VLO frequency supply voltage drift dfVLO/dVCC 4 %/V Measured at MCLK, 1.8 V to 3.6 V 30
VLO duty cycle fVLO,DC 50 % Measured at MCLK, 3 V 30
MODOSC frequency fMODOSC 3 3.8 4.6 MHz 3 V 30
MODOSC frequency temperature drift fMODOSC/dT 0.102 %/℃ 3 V 30
MODOSC frequency supply voltage drift fMODOSC/dVCC 1.17 %/V 1.8 V to 3.6 V 30
MODOSC duty cycle fMODOSC,DC 40 50 60 % 3 V 30
Temperature sensor coefficient TCSENSOR 2.5 mV/°C TJ = 30°C 33
Positive built-in reference output at VREF+ 1.2 V VREF+, 1.2V Output 1.16 1.2 1.24 V EXTREFEN = 1 with 1-mA load current to ground, 2.0 V, 3.0 V 33
Positive built-in reference voltage 2.5 V tolerance VREF+ -1.5 1.5 % REFVSEL = {2} for 2.5 V, INTREFEN = 1 33
Positive built-in reference voltage 2.0 V tolerance VREF+ -1.5 1.5 % REFVSEL = {1} for 2.0 V, INTREFEN = 1 33
Positive built-in reference voltage 1.5 V tolerance VREF+ -1.8 1.8 % REFVSEL = {0} for 1.5 V, INTREFEN = 1 33

CAD (KiCad official)

  • Symbol: MSP430FR2475TRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: msp430fr2475trhbr-etched.step / msp430fr2475trhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430fr2475trhbr.step / msp430fr2475trhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (111 pp, sha256 8beeba32abeec2bd, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF