3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430FR2475TRHBR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-32-EP(5x5)
MSP430FR2475TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input with pullup enabled after BOR, which can also be configured as NMI or as the Spy-Bi-Wire data input/output (SBWTDIO); unused use requires a 47-kΩ pullup or internal pullup with a 10-nF pulldown. |
| 2 | TEST/SBWTCK | input | Test mode pin that is the Spy-Bi-Wire input clock (SBWTCK) and has an internal pulldown that is always enabled; leave open if unused. |
| 3 | P1.4/UCA0TXD/UCA0SIMO/TA1.2/TCK/A4/VREF+ | bidirectional | General-purpose I/O P1.4 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 UART/SPI transmit, Timer_A1 CCR2, JTAG TCK, ADC input A4 and VREF+ output. |
| 4 | P1.5/UCA0RXD/UCA0SOMI/TA1.1/TMS/A5 | bidirectional | General-purpose I/O P1.5 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 UART/SPI receive, Timer_A1 CCR1, JTAG TMS and ADC input A5. |
| 5 | P1.6/UCA0CLK/TA1CLK/TDI/TCLK/A6 | bidirectional | General-purpose I/O P1.6 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 clock, Timer_A1 clock input, JTAG TDI/TCLK and ADC input A6. |
| 6 | P1.7/UCA0STE/SMCLK/TDO/A7 | bidirectional | General-purpose I/O P1.7 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_A0 STE, SMCLK output, JTAG TDO and ADC input A7. |
| 7 | P1.0/UCB0STE/TA0CLK/A0/Veref+ | bidirectional | General-purpose I/O P1.0 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 STE, Timer_A0 clock input, ADC input A0 and ADC positive reference Veref+. |
| 8 | P1.1/UCB0CLK/TA0.1/COMP0.0/A1 | bidirectional | General-purpose I/O P1.1 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 clock, Timer_A0 CCR1, eCOMP0 input channel C0 and ADC input A1. |
| 9 | P1.2/UCB0SIMO/UCB0SDA/TA0.2/A2/Veref- | bidirectional | General-purpose I/O P1.2 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 SIMO/SDA, Timer_A0 CCR2, ADC input A2 and ADC negative reference Veref-. |
| 10 | P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 | bidirectional | General-purpose I/O P1.3 with port interrupt and wake from LPMx.5, multiplexed with eUSCI_B0 SOMI/SCL, MCLK output and ADC input A3. |
| 11 | P2.2/ACLK/COMP0.1 | bidirectional | General-purpose I/O P2.2 with port interrupt and wake from LPMx.5, multiplexed with ACLK output and eCOMP0 input channel C1. |
| 12 | P3.0/TA2.2 | bidirectional | General-purpose I/O P3.0, multiplexed with Timer_A2 CCR2 capture/compare output (remap alternative P6.0). |
| 13 | P3.3/TA2.1 | bidirectional | General-purpose I/O P3.3, multiplexed with Timer_A2 CCR1 capture/compare output (remap alternative P5.7). |
| 14 | P2.3/TA2.0 | bidirectional | General-purpose I/O P2.3, multiplexed with Timer_A2 CCR0 capture/compare output (remap alternative P5.6). |
| 15 | P3.4/TA2CLK/COMP0OUT | bidirectional | General-purpose I/O P3.4, multiplexed with Timer_A2 clock input and eCOMP0 output COUT. |
| 16 | P3.1/UCA1STE | bidirectional | General-purpose I/O P3.1, multiplexed with eUSCI_A1 STE. |
| 17 | P2.4/UCA1CLK | bidirectional | General-purpose I/O P2.4, multiplexed with eUSCI_A1 clock. |
| 18 | P2.5/UCA1RXD/UCA1SOMI | bidirectional | General-purpose I/O P2.5, multiplexed with eUSCI_A1 UART receive or SPI SOMI. |
| 19 | P2.6/UCA1TXD/UCA1SIMO | bidirectional | General-purpose I/O P2.6, multiplexed with eUSCI_A1 UART transmit or SPI SIMO. |
| 20 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 21 | P3.7/TA3.2 | bidirectional | General-purpose I/O P3.7, multiplexed with Timer_A3 CCR2 capture/compare output (remap alternative P4.5). |
| 22 | P4.0/TA3.1 | bidirectional | General-purpose I/O P4.0, multiplexed with Timer_A3 CCR1 capture/compare output (remap alternative P4.6). |
| 23 | P4.1/TA3.0 | bidirectional | General-purpose I/O P4.1, multiplexed with Timer_A3 CCR0 capture/compare output (remap alternative P5.3). |
| 24 | P4.2/TA3CLK | bidirectional | General-purpose I/O P4.2, multiplexed with Timer_A3 clock input (remap alternative P5.4). |
| 25 | P2.7/UCB1STE | bidirectional | General-purpose I/O P2.7, multiplexed with eUSCI_B1 STE. |
| 26 | P3.5/UCB1CLK/TB0TRG | bidirectional | General-purpose I/O P3.5, multiplexed with eUSCI_B1 clock and the Timer_B0 external high-impedance trigger input TB0TRG. |
| 27 | P3.2/UCB1SIMO/UCB1SDA | bidirectional | General-purpose I/O P3.2, multiplexed with eUSCI_B1 SIMO or I2C SDA. |
| 28 | P3.6/UCB1SOMI/UCB1SCL | bidirectional | General-purpose I/O P3.6, multiplexed with eUSCI_B1 SOMI or I2C SCL. |
| 29 | P2.0/XOUT | bidirectional | General-purpose I/O P2.0, multiplexed with the 32-kHz crystal oscillator output XOUT. |
| 30 | P2.1/XIN | bidirectional | General-purpose I/O P2.1, multiplexed with the 32-kHz crystal oscillator input XIN, which can also accept a digital clock in XT1BYPASS mode. |
| 31 | DVSS | power_in | Digital ground supply pin; recommended supply range 0 V to ground reference for the device. |
| 32 | DVCC | power_in | Digital supply voltage pin, 1.8 V to 3.6 V per recommended operating conditions, with 10-µF plus 100-nF decoupling recommended. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at DVCC pin | VCC | 1.8 | 3.6 | V | 20 | ||
| Operating free-air temperature | TA | -40 | 105 | °C | 20 | ||
| Operating junction temperature | TJ | -40 | 115 | °C | 20 | ||
| Recommended capacitor at DVCC | CDVCC | 4.7 | 10 | µF | 20 | ||
| Capacitor tolerance at DVCC | -20 | 20 | % | 20 | |||
| Processor frequency (MCLK) no FRAM wait states | fSYSTEM | 0 | 8 | MHz | NWAITSx = 0 | 20 | |
| Processor frequency (MCLK) with FRAM wait states | fSYSTEM | 0 | 16 | MHz | NWAITSx = 1 | 20 | |
| Voltage applied at DVCC pin to VSS | -0.3 | 4.1 | V | 20 | |||
| Voltage applied to any other pin | -0.3 | V | VCC + 0.3 (4.1 V Max) | 20 | |||
| Diode current at any device pin | -2 | 2 | mA | 20 | |||
| Junction temperature, TJ | TJ | 115 | °C | 20 | |||
| Storage temperature, Tstg | Tstg | -40 | 125 | °C | 20 | ||
| Human-body model ESD (HBM) | V(ESD) | -1000 | 1000 | V | ANSI/ESDA/JEDEC JS-001 | 20 | |
| Charged-device model ESD (CDM) | V(ESD) | -250 | 250 | V | JEDEC JESD22-C101 | 20 | |
| Junction-to-ambient thermal resistance VQFN 32 pin (RHB) | RθJA | 30.8 | °C/W | still air, JEDEC 2S2P | 25 | ||
| Junction-to-case (top) thermal resistance VQFN 32 pin (RHB) | RθJC | 20.8 | °C/W | 25 | |||
| Junction-to-board thermal resistance VQFN 32 pin (RHB) | RθJB | 11.6 | °C/W | 25 | |||
| Positive-going input threshold voltage | VIT+ | 0.9 | 1.5 | V | VCC = 2 V | 31 | |
| Positive-going input threshold voltage | VIT+ | 1.35 | 2.25 | V | VCC = 3 V | 31 | |
| Negative-going input threshold voltage | VIT- | 0.5 | 1.1 | V | VCC = 2 V | 31 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3 V | 31 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 0.8 | V | VCC = 2 V | 31 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.4 | 1.2 | V | VCC = 3 V | 31 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; For pulldown: VIN = VCC | 31 |
| High-impedance leakage current of GPIO pins | Ilkg(Px.y) | -20 | 20 | nA | VCC = 2 V, 3 V | 31 | |
| High-level output voltage | VOH | 1.4 | 2 | V | I(OHmax) = -3 mA, VCC = 2 V | 31 | |
| High-level output voltage | VOH | 2.4 | 3 | V | I(OHmax) = -5 mA, VCC = 3 V | 31 | |
| Low-level output voltage | VOL | 0 | 0.6 | V | I(OLmax) = 3 mA, VCC = 2 V | 31 | |
| Timer_A input clock frequency | fTA | 16 | MHz | Internal: SMCLK, ACLK; External: TACLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V | 34 | ||
| Timer_A capture timing | tTA,cap | 20 | ns | All capture inputs, minimum pulse duration required for capture; VCC 2 V, 3 V | 34 | ||
| Timer_B input clock frequency | fTB | 16 | MHz | Internal: SMCLK, ACLK; External: TBCLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V | 34 | ||
| Timer_B capture timing | tTB,cap | 20 | ns | All capture inputs, minimum pulse duration required for capture; VCC 2 V, 3 V | 34 | ||
| eUSCI input clock frequency (UART mode) | feUSCI | 16 | MHz | Internal: SMCLK, MODCLK; External: UCLK; Duty cycle = 50% ±10%; VCC 2 V, 3 V | 35 | ||
| BITCLK clock frequency (equals baud rate in Mbaud) | fBITCLK | 5 | MHz | VCC 2 V, 3 V | 35 | ||
| eUSCI input clock frequency (SPI master mode) | feUSCI | 8 | MHz | Internal: SMCLK, MODCLK; Duty cycle = 50% ±10% | 35 | ||
| SOMI input data setup time | tSU,MI | 58 | ns | VCC = 2 V | 35 | ||
| SOMI input data setup time | tSU,MI | 40 | ns | VCC = 3 V | 35 | ||
| SIMO output data valid time | tVALID,MO | 20 | ns | UCLK edge to SIMO valid, CL = 20 pF, VCC = 2 V | 35 | ||
| Integral linearity error (12-bit mode) | EI | -2.5 | 2.5 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Integral linearity error (10-bit mode) | EI | -2 | 2 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Differential linearity error (12-bit mode) | ED | -1 | 1.5 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Differential linearity error (10-bit mode) | ED | -1 | 1.5 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Offset error (12-bit mode) | EO | -4 | 4 | mV | Veref+ reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| Offset error (10-bit mode) | EO | -4 | 4 | mV | Veref+ reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| Gain error (12-bit mode) | EG | -9 | 9 | LSB | Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| Gain error (10-bit mode) | EG | -3 | 3 | LSB | Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| Total unadjusted error (12-bit mode) | ET | -5 | 5 | LSB | Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| Total unadjusted error (10-bit mode) | ET | -2 | 2 | LSB | Veref+ as reference, TLV calibration data can be used to improve the parameter; 2.4 V to 3.6 V | 41 | |
| eCOMP supply voltage | VCC | 2 | 3.6 | V | 42 | ||
| Input offset voltage | VOFFSET | -30 | 30 | mV | CPEN = 1, CPMSEL = 0 | 42 | |
| Input offset voltage | VOFFSET | -40 | 40 | mV | CPEN = 1, CPMSEL = 1 | 42 | |
| Integral nonlinearity | INL | -0.5 | 0.5 | LSB | 42 | ||
| Differential nonlinearity | DNL | -0.5 | 0.5 | LSB | 42 | ||
| Data retention duration | tRetention | 100 | years | TJ = 25°C | 43 | ||
| Data retention duration | tRetention | 40 | years | TJ = 70°C | 43 | ||
| Data retention duration | tRetention | 10 | years | TJ = 95°C | 43 | ||
| Spy-Bi-Wire input frequency | fSBW | 0 | 8 | MHz | 2.2 V, 3.0 V | 43 | |
| Spy-Bi-Wire low clock pulse duration | tSBW,Low | 0.04 | 15 | µs | 2.2 V, 3.0 V | 43 | |
| Spy-Bi-Wire return to normal operation time | tSBW,Rst | 15 | 100 | µs | 43 | ||
| Internal pulldown resistance on TEST | Rinternal | 20 | 35 | 50 | kΩ | 2.2 V, 3.0 V | 43 |
| TCK input frequency, 4-wire JTAG | fTCK | 0 | 10 | MHz | 2.2 V and 3.0 V | 43 | |
| TCLK/MCLK frequency during JTAG access, no FRAM access | fTCLK | 16 | MHz | limited by fSYSTEM | 43 | ||
| TCLK low or high clock pulse duration, no FRAM access | tTCLK,Low/High | 25 | ns | 43 | |||
| TCLK/MCLK frequency during JTAG access, including FRAM access | fTCLK,FRAM | 4 | MHz | limited by fSYSTEM with no FRAM wait states | 43 | ||
| TCLK low or high clock pulse duration, including FRAM accesses | tTCLK,FRAM,Low/High | 100 | ns | 43 | |||
| Safe BOR power-down level | VBOR,safe | 0.1 | V | 25 | |||
| SVSH power-down level | VSVSH- | 1.71 | 1.8 | 1.87 | V | 25 | |
| SVSH power-up level | VSVSH+ | 1.76 | 1.88 | 1.99 | V | 25 | |
| SVSH propagation delay, active mode | tPD,SVSH, AM | 10 | µs | 25 | |||
| SVSH propagation delay, low-power modes | tPD,SVSH, LPM | 100 | µs | 25 | |||
| Additional wake-up time to activate the FRAM in AM | tWAKE-UP FRAM | 10 | µs | VCC = 3 V | 26 | ||
| Wake-up time from LPM3 to active mode | tWAKE-UP LPM3 | 10 | µs | VCC = 3 V | 26 | ||
| Wake-up time from LPM4 to active mode | tWAKE-UP LPM4 | 10 | µs | VCC = 3 V | 26 | ||
| Wake-up time from LPM3.5 to active mode | tWAKE-UP LPM3.5 | 350 | µs | VCC = 3 V | 26 | ||
| Wake-up time from LPM4.5 to active mode | tWAKE-UP LPM4.5 | 350 | µs | SVSHE = 1, VCC = 3 V | 26 | ||
| Wake-up time from LPM4.5 to active mode | tWAKE-UP LPM4.5 | 1 | ms | SVSHE = 0, VCC = 3 V | 26 | ||
| Wake-up time from RST or BOR event to active mode | tWAKE-UP-RESET | 1 | ms | VCC = 3 V | 26 | ||
| Pulse duration required at RST/NMI pin to accept a reset | tRESET | 2 | µs | VCC = 3 V | 26 | ||
| LFXT duty cycle | DCXT1 | 30 | 70 | % | Measured at MCLK, fLFXT = 32768 Hz | 27 | |
| LFXT oscillator logic-level square-wave input duty cycle | DCXT1,SW | 40 | 60 | % | LFXTBYPASS = 1 | 27 | |
| Oscillation allowance for LF crystals | OALFXT | 200 | kΩ | LFXTBYPASS = 0, LFXTDRIVE = {3}, fLFXT = 32768 Hz, CL,eff = 12.5 pF | 27 | ||
| Oscillator fault frequency | fFault,LFXT | 0 | 3500 | Hz | XTS = 0 | 27 | |
| FLL lock frequency, 16 MHz, 25°C | fDCO,FLL | -1 | 1 | % | Measured at MCLK, internal trimmed REFO as reference, 3 V | 28 | |
| FLL lock frequency, 16 MHz, -40°C to 105°C | fDCO,FLL | -3 | 3 | % | 3 V | 28 | |
| FLL lock frequency, 16 MHz, -40°C to 105°C, XT1 reference | fDCO,FLL | -0.5 | 0.5 | % | Measured at MCLK, XT1 crystal as reference, 3 V | 28 | |
| Duty cycle | fDUTY | 40 | 50 | 60 | % | Measured at MCLK, XT1 crystal as reference, 3 V | 28 |
| REFO absolute calibrated tolerance | fREFO | -3.5 | 3.5 | % | -40°C to 105°C, 1.8 V to 3.6 V | 30 | |
| REFO frequency temperature drift | dfREFO/dT | 0.01 | %/°C | Measured at MCLK, 3 V | 30 | ||
| REFO frequency supply voltage drift | dfREFO/dVCC | 1 | %/V | Measured at MCLK at 25°C, 1.8 V to 3.6 V | 30 | ||
| REFO duty cycle | fDC | 40 | 50 | 60 | % | Measured at MCLK, 1.8 V to 3.6 V | 30 |
| VLO frequency | fVLO | 10 | kHz | Measured at MCLK, 3 V | 30 | ||
| VLO frequency temperature drift | dfVLO/dT | 0.5 | %/°C | Measured at MCLK, 3 V | 30 | ||
| VLO frequency supply voltage drift | dfVLO/dVCC | 4 | %/V | Measured at MCLK, 1.8 V to 3.6 V | 30 | ||
| VLO duty cycle | fVLO,DC | 50 | % | Measured at MCLK, 3 V | 30 | ||
| MODOSC frequency | fMODOSC | 3 | 3.8 | 4.6 | MHz | 3 V | 30 |
| MODOSC frequency temperature drift | fMODOSC/dT | 0.102 | %/℃ | 3 V | 30 | ||
| MODOSC frequency supply voltage drift | fMODOSC/dVCC | 1.17 | %/V | 1.8 V to 3.6 V | 30 | ||
| MODOSC duty cycle | fMODOSC,DC | 40 | 50 | 60 | % | 3 V | 30 |
| Temperature sensor coefficient | TCSENSOR | 2.5 | mV/°C | TJ = 30°C | 33 | ||
| Positive built-in reference output at VREF+ 1.2 V | VREF+, 1.2V Output | 1.16 | 1.2 | 1.24 | V | EXTREFEN = 1 with 1-mA load current to ground, 2.0 V, 3.0 V | 33 |
| Positive built-in reference voltage 2.5 V tolerance | VREF+ | -1.5 | 1.5 | % | REFVSEL = {2} for 2.5 V, INTREFEN = 1 | 33 | |
| Positive built-in reference voltage 2.0 V tolerance | VREF+ | -1.5 | 1.5 | % | REFVSEL = {1} for 2.0 V, INTREFEN = 1 | 33 | |
| Positive built-in reference voltage 1.5 V tolerance | VREF+ | -1.8 | 1.8 | % | REFVSEL = {0} for 1.5 V, INTREFEN = 1 | 33 |
CAD (KiCad official)
- Symbol:
MSP430FR2475TRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
msp430fr2475trhbr-etched.step/msp430fr2475trhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr2475trhbr.step/msp430fr2475trhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (111 pp, sha256
8beeba32abeec2bd, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).