main
Ray msp430fr2422ipw16r: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b6cb6ee
{
  "schema_version": 1,
  "type": "component",
  "slug": "msp430fr2422ipw16r",
  "title": "MSP430FR2422IPW16R",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "msp430fr2422ipw16r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MSP430FR2422IPW16R",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430fr2422",
    "parts": {
      "symbol": "msp430fr2422ipw16r.kicad_sym",
      "footprint": "msp430fr2422ipw16r.kicad_mod",
      "model_3d": "msp430fr2422ipw16r-etched.glb",
      "model_3d_plain": "msp430fr2422ipw16r.glb",
      "model_3d_step": "msp430fr2422ipw16r-etched.step",
      "model_3d_step_plain": "msp430fr2422ipw16r.step",
      "lbr": "msp430fr2422ipw16r.lbr"
    },
    "distributor_links": {
      "lcsc": "C191019"
    },
    "pins": [
      {
        "number": "1",
        "name": "P1.1",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include ACLK output, ADC channel A1 input, I2C/SPI clock (UCB0CLK), and analog reference voltage output (VREF+)"
      },
      {
        "number": "2",
        "name": "P1.0",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include I2C/SPI slave transmit enable (UCB0STE), ADC channel A0 input, and analog reference voltage output (Veref+)"
      },
      {
        "number": "3",
        "name": "TEST",
        "type": "input",
        "description": "Test mode control input for JTAG and Spy-Bi-Wire debug interface activation; internal pull-down resistor (20 kΩ to 50 kΩ) is always enabled"
      },
      {
        "number": "4",
        "name": "RST",
        "type": "input",
        "description": "Active-low reset input with minimum 2 µs pulse duration requirement; configurable as nonmaskable interrupt (NMI) or Spy-Bi-Wire bidirectional data pin (SBWTDIO)"
      },
      {
        "number": "5",
        "name": "DVCC",
        "type": "power_in",
        "description": "Digital power supply input with operating voltage range of 1.8 V to 3.6 V; requires 4.7 µF to 10 µF bypass capacitor with ±20% tolerance or better placed within few millimeters of pin"
      },
      {
        "number": "6",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground reference providing return current path for power supply and all digital circuits"
      },
      {
        "number": "7",
        "name": "P2.1",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include UART receive (UCA0RXD), SPI slave receive (UCA0SOMI), and low-frequency crystal oscillator input (XIN)"
      },
      {
        "number": "8",
        "name": "P2.0",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include UART transmit (UCA0TXD), SPI slave transmit (UCA0SIMO), and crystal oscillator output (XOUT)"
      },
      {
        "number": "9",
        "name": "P2.2",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include Timer A1 capture/compare output (TA1.1) or ADC channel A4 analog input"
      },
      {
        "number": "10",
        "name": "P1.7",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include SPI slave transmit enable (UCA0STE) or JTAG test data output (TDO); pin interrupts must be disabled during JTAG debug"
      },
      {
        "number": "11",
        "name": "P1.6",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include SPI clock (UCA0CLK), Timer A0 clock input (TA0CLK), or JTAG interface signals (TDI/TCLK); pin interrupts must be disabled during JTAG debug"
      },
      {
        "number": "12",
        "name": "P1.5",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include UART receive (UCA0RXD), SPI receive (UCA0SOMI), Timer A0 capture/compare (TA0.2), or JTAG test mode select (TMS); pin interrupts must be disabled during JTAG debug"
      },
      {
        "number": "13",
        "name": "P1.4",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include UART transmit (UCA0TXD), SPI transmit (UCA0SIMO), Timer A0 capture/compare (TA0.1), or JTAG test clock (TCK); pin interrupts must be disabled during JTAG debug"
      },
      {
        "number": "14",
        "name": "DNC",
        "type": "unconnected",
        "description": "Do not connect pad; must be left unconnected or open on PCB for proper device operation"
      },
      {
        "number": "15",
        "name": "P1.3",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include I2C/SPI receive (UCB0SOMI/UCB0SCL), main clock output (MCLK), or ADC channel A3 analog input"
      },
      {
        "number": "16",
        "name": "P1.2",
        "type": "bidirectional",
        "description": "General-purpose I/O pin with reset default function; alternate functions include I2C/SPI transmit (UCB0SIMO/UCB0SDA), subsystem clock output (SMCLK), ADC channel A2 input, or ADC reference voltage input (Veref-)"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin RST (pin 4) has multiple configuration options: active-low reset (primary function), nonmaskable; JTAG interface pins (P1.4, P1.5, P1.6, P1.7) are multiplexed with other peripheral functions; datash; Analog reference pins (P1.0, P1.1, P1.2) have dual functionality as general-purpose I/O and analog r"
        ],
        "pages_sent": 86,
        "cost_usd": 1.0931,
        "at": "2026-09-23T07:28:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/msp430fr2422",
        "pages": 86,
        "sha256": "4854cd8a5843413c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "msp430fr2422ipw16r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "msp430fr2422ipw16r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "bc51a094d3192aff1bcd48284c50f0b883a535d7e1ab924d3bd323a1ed6f0d0f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "Embedded Processors & Controllers",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "msp430fr2422ipw16r"
  ],
  "discovery_pitch": "MSP430FR2422IPW16R (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "msp430fr2422ipw16r.kicad_sym",
    "msp430fr2422ipw16r.kicad_mod",
    "msp430fr2422ipw16r.glb",
    "msp430fr2422ipw16r.step",
    "msp430fr2422ipw16r.lbr",
    "docs/hero.png",
    "docs/msp430fr2422ipw16r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:27:29.964Z"
}