main
Ray Publish 0.1.0 de250e8

MSP430FR2310IPW20R

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

MSP430FR2310IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.1 bidirectional General-purpose I/O (reset default, OFF after BOR) that is shared with the eUSCI_B0 clock, ACLK output, comparator C1 and ADC input A1, powered from DVCC.
2 P1.0 bidirectional General-purpose I/O (reset default, OFF after BOR) shared with eUSCI_B0 STE, SMCLK output, comparator C0, ADC input A0 and the Veref+ reference input, powered from DVCC.
3 TEST input Test mode pin used for JTAG and Spy-Bi-Wire access; it always has an internal pulldown enabled and should be left open when unused.
4 RST/NMI/SBWTDIO bidirectional Active-low reset input (RST) that also serves as the nonmaskable interrupt input (NMI) and Spy-Bi-Wire data pin; unused it should be tied to DVCC through a 47-kΩ pullup or internal pullup with a 10-nF (or 1.1-nF) pulldown.
5 DVCC power_in Power supply input for the device, specified from 1.8 V to 3.6 V with a recommended 4.7-µF to 10-µF capacitor at this pin.
6 DVSS power_in Device ground supply pin; all voltages are referenced to VSS.
7 P2.7/TB0CLK/XIN bidirectional General-purpose I/O shared with the Timer_B0 clock input TB0CLK and the input terminal XIN of the external crystal oscillator.
8 P2.6/MCLK/XOUT bidirectional General-purpose I/O shared with the MCLK output and the output terminal XOUT of the external crystal oscillator.
9 P2.5/UCB0SOMI/UCB0SCL bidirectional General-purpose I/O shared with the eUSCI_B0 SPI slave-out/master-in and I2C clock functions.
10 P2.4/UCB0SIMO/UCB0SDA bidirectional General-purpose I/O shared with the eUSCI_B0 SPI slave-in/master-out and I2C data functions.
11 P2.3/UCB0CLK/TB1TRG bidirectional General-purpose I/O shared with the eUSCI_B0 clock and the Timer_B1 external trigger TB1TRG.
12 P2.2/UCB0STE/TB1CLK bidirectional General-purpose I/O shared with the eUSCI_B0 slave transmit enable and the Timer_B1 clock input TB1CLK.
13 P2.1/TB1.2 bidirectional General-purpose I/O shared with Timer_B1 capture/compare channel 2 (TB1.2).
14 P2.0/TB1.1/COUT bidirectional General-purpose I/O shared with Timer_B1 capture/compare channel 1 (TB1.1) and the eCOMP0 comparator output COUT.
15 P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/TRI0+/A7/VREF+ bidirectional General-purpose I/O shared with eUSCI_A0 UART transmit and SPI functions, Timer_B0 channel 2, JTAG TDO, TIA0 positive input, ADC input A7 and the VREF+ reference output.
16 P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/TRI0-/A6 bidirectional General-purpose I/O shared with eUSCI_A0 UART receive and SPI functions, Timer_B0 channel 1, JTAG TDI/TCLK, TIA0 negative input and ADC input A6; on this package the TIA negative port is shared with this GPIO.
17 P1.5/UCA0CLK/TMS/TRI0O/A5 bidirectional General-purpose I/O shared with the eUSCI_A0 SPI clock, JTAG TMS, TIA0 output TRI0O and ADC input A5.
18 P1.4/UCA0STE/TCK/OA0+/A4 bidirectional General-purpose I/O shared with the eUSCI_A0 SPI slave transmit enable, JTAG TCK, SAC0 op amp positive input OA0+ and ADC input A4.
19 P1.3/UCB0SOMI/UCB0SCL/OA0O/A3 bidirectional General-purpose I/O shared with the eUSCI_B0 SPI slave-out/master-in and I2C clock functions, SAC0 op amp output OA0O and ADC input A3.
20 P1.2/UCB0SIMO/UCB0SDA/TB0TRG/OA0-/A2/Veref- bidirectional General-purpose I/O shared with the eUSCI_B0 SPI slave-in/master-out and I2C data functions, Timer_B0 external trigger TB0TRG, SAC0 op amp negative input OA0-, ADC input A2 and the Veref- reference input.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage at DVCC pin to VSS -0.3 4.1 V 15
Supply voltage applied at DVCC pin VCC 1.8 3.6 V 15
Operating free-air temperature TA -40 85 °C 15
Operating junction temperature TJ -40 85 °C 15
Recommended capacitor at DVCC CDVCC 4.7 10 µF 15
Processor frequency (maximum MCLK frequency) fSYSTEM 0 8 MHz No FRAM wait states (NWAITSx = 0) 15
Processor frequency (maximum MCLK frequency) fSYSTEM 0 16 MHz With FRAM wait states (NWAITSx = 1) 15
Maximum ACLK frequency fACLK 40 kHz 15
Maximum SMCLK frequency fSMCLK 16 MHz 15
Maximum junction temperature TJ 85 °C 15
Storage temperature Tstg -40 125 °C 15
Diode current at any device pin -2 2 mA 15
Junction-to-ambient thermal resistance, still air, TSSOP 20 pin (PW20) θJA 92.6 ºC/W Still air, natural convection, JESD51-7 High-K board 20
Junction-to-case (top) thermal resistance, TSSOP 20 pin (PW20) θJC 26.1 ºC/W Cold plate test on package top 20
Junction-to-board thermal resistance, TSSOP 20 pin (PW20) θJB 45 ºC/W Ring cold plate fixture, JESD51-8 20
SVSH power-down level VSVSH- 1.71 1.8 1.87 V 21
SVSH power-up level VSVSH+ 1.76 1.88 1.99 V 21
Active mode current consumption per MHz dIAM,FRAM/df 126 µA/MHz VCC = 3.0 V, TA = 25°C, execution from FRAM, no wait states 16
Internal pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 28
High-impedance leakage current Ilkg(Px.y) -20 20 nA 2 V, 3 V 28
Positive built-in reference voltage VREF+ 1.15 1.19 1.23 V EXTREFEN = 1 with 1-mA load current to ground, VCC 2.0 V, 3.0 V 30
Timer_B input clock frequency fTB 16 MHz Internal SMCLK or ACLK, external TBCLK, duty cycle 50% ±10%, 2.0 V, 3.0 V 30
FLL lock frequency, 16 MHz, 25°C fDCO,FLL -1 1 % Measured at MCLK, internal trimmed REFO as reference, 3.0 V 25
REFO absolute calibrated tolerance fREFO -3.5 3.5 % TA = -40°C to 85°C, 1.8 V to 3.6 V 26
Offset error (10-bit mode) EO -6.5 6.5 mV Veref+ reference, 2.4 V to 3.6 V 37
Integral linearity error (10-bit mode) EI -2 2 LSB Veref+ reference, 2.4 V to 3.6 V 37
Input offset voltage (SAC0, OA) VOS -5 5 mV 39
Input offset voltage (TIA0) VOS -5 5 mV 40
Input offset voltage (eCOMP0) VOFFSET -30 30 mV CPEN = 1, CPMSEL = 0 38

CAD (KiCad official)

  • Symbol: MSP430FR2310IPW20R
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: msp430fr2310ipw20r-etched.step / msp430fr2310ipw20r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430fr2310ipw20r.step / msp430fr2310ipw20r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (99 pp, sha256 4b9af8e3f8ad3189, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF