Generated by kicad-footprint-generator · KiCad file format 20260206
MSP430FR2310IPW20R
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
MSP430FR2310IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.1 | bidirectional | General-purpose I/O (reset default, OFF after BOR) that is shared with the eUSCI_B0 clock, ACLK output, comparator C1 and ADC input A1, powered from DVCC. |
| 2 | P1.0 | bidirectional | General-purpose I/O (reset default, OFF after BOR) shared with eUSCI_B0 STE, SMCLK output, comparator C0, ADC input A0 and the Veref+ reference input, powered from DVCC. |
| 3 | TEST | input | Test mode pin used for JTAG and Spy-Bi-Wire access; it always has an internal pulldown enabled and should be left open when unused. |
| 4 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (RST) that also serves as the nonmaskable interrupt input (NMI) and Spy-Bi-Wire data pin; unused it should be tied to DVCC through a 47-kΩ pullup or internal pullup with a 10-nF (or 1.1-nF) pulldown. |
| 5 | DVCC | power_in | Power supply input for the device, specified from 1.8 V to 3.6 V with a recommended 4.7-µF to 10-µF capacitor at this pin. |
| 6 | DVSS | power_in | Device ground supply pin; all voltages are referenced to VSS. |
| 7 | P2.7/TB0CLK/XIN | bidirectional | General-purpose I/O shared with the Timer_B0 clock input TB0CLK and the input terminal XIN of the external crystal oscillator. |
| 8 | P2.6/MCLK/XOUT | bidirectional | General-purpose I/O shared with the MCLK output and the output terminal XOUT of the external crystal oscillator. |
| 9 | P2.5/UCB0SOMI/UCB0SCL | bidirectional | General-purpose I/O shared with the eUSCI_B0 SPI slave-out/master-in and I2C clock functions. |
| 10 | P2.4/UCB0SIMO/UCB0SDA | bidirectional | General-purpose I/O shared with the eUSCI_B0 SPI slave-in/master-out and I2C data functions. |
| 11 | P2.3/UCB0CLK/TB1TRG | bidirectional | General-purpose I/O shared with the eUSCI_B0 clock and the Timer_B1 external trigger TB1TRG. |
| 12 | P2.2/UCB0STE/TB1CLK | bidirectional | General-purpose I/O shared with the eUSCI_B0 slave transmit enable and the Timer_B1 clock input TB1CLK. |
| 13 | P2.1/TB1.2 | bidirectional | General-purpose I/O shared with Timer_B1 capture/compare channel 2 (TB1.2). |
| 14 | P2.0/TB1.1/COUT | bidirectional | General-purpose I/O shared with Timer_B1 capture/compare channel 1 (TB1.1) and the eCOMP0 comparator output COUT. |
| 15 | P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/TRI0+/A7/VREF+ | bidirectional | General-purpose I/O shared with eUSCI_A0 UART transmit and SPI functions, Timer_B0 channel 2, JTAG TDO, TIA0 positive input, ADC input A7 and the VREF+ reference output. |
| 16 | P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/TRI0-/A6 | bidirectional | General-purpose I/O shared with eUSCI_A0 UART receive and SPI functions, Timer_B0 channel 1, JTAG TDI/TCLK, TIA0 negative input and ADC input A6; on this package the TIA negative port is shared with this GPIO. |
| 17 | P1.5/UCA0CLK/TMS/TRI0O/A5 | bidirectional | General-purpose I/O shared with the eUSCI_A0 SPI clock, JTAG TMS, TIA0 output TRI0O and ADC input A5. |
| 18 | P1.4/UCA0STE/TCK/OA0+/A4 | bidirectional | General-purpose I/O shared with the eUSCI_A0 SPI slave transmit enable, JTAG TCK, SAC0 op amp positive input OA0+ and ADC input A4. |
| 19 | P1.3/UCB0SOMI/UCB0SCL/OA0O/A3 | bidirectional | General-purpose I/O shared with the eUSCI_B0 SPI slave-out/master-in and I2C clock functions, SAC0 op amp output OA0O and ADC input A3. |
| 20 | P1.2/UCB0SIMO/UCB0SDA/TB0TRG/OA0-/A2/Veref- | bidirectional | General-purpose I/O shared with the eUSCI_B0 SPI slave-in/master-out and I2C data functions, Timer_B0 external trigger TB0TRG, SAC0 op amp negative input OA0-, ADC input A2 and the Veref- reference input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage at DVCC pin to VSS | -0.3 | 4.1 | V | 15 | |||
| Supply voltage applied at DVCC pin | VCC | 1.8 | 3.6 | V | 15 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 15 | ||
| Operating junction temperature | TJ | -40 | 85 | °C | 15 | ||
| Recommended capacitor at DVCC | CDVCC | 4.7 | 10 | µF | 15 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 8 | MHz | No FRAM wait states (NWAITSx = 0) | 15 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 16 | MHz | With FRAM wait states (NWAITSx = 1) | 15 | |
| Maximum ACLK frequency | fACLK | 40 | kHz | 15 | |||
| Maximum SMCLK frequency | fSMCLK | 16 | MHz | 15 | |||
| Maximum junction temperature | TJ | 85 | °C | 15 | |||
| Storage temperature | Tstg | -40 | 125 | °C | 15 | ||
| Diode current at any device pin | -2 | 2 | mA | 15 | |||
| Junction-to-ambient thermal resistance, still air, TSSOP 20 pin (PW20) | θJA | 92.6 | ºC/W | Still air, natural convection, JESD51-7 High-K board | 20 | ||
| Junction-to-case (top) thermal resistance, TSSOP 20 pin (PW20) | θJC | 26.1 | ºC/W | Cold plate test on package top | 20 | ||
| Junction-to-board thermal resistance, TSSOP 20 pin (PW20) | θJB | 45 | ºC/W | Ring cold plate fixture, JESD51-8 | 20 | ||
| SVSH power-down level | VSVSH- | 1.71 | 1.8 | 1.87 | V | 21 | |
| SVSH power-up level | VSVSH+ | 1.76 | 1.88 | 1.99 | V | 21 | |
| Active mode current consumption per MHz | dIAM,FRAM/df | 126 | µA/MHz | VCC = 3.0 V, TA = 25°C, execution from FRAM, no wait states | 16 | ||
| Internal pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 28 |
| High-impedance leakage current | Ilkg(Px.y) | -20 | 20 | nA | 2 V, 3 V | 28 | |
| Positive built-in reference voltage | VREF+ | 1.15 | 1.19 | 1.23 | V | EXTREFEN = 1 with 1-mA load current to ground, VCC 2.0 V, 3.0 V | 30 |
| Timer_B input clock frequency | fTB | 16 | MHz | Internal SMCLK or ACLK, external TBCLK, duty cycle 50% ±10%, 2.0 V, 3.0 V | 30 | ||
| FLL lock frequency, 16 MHz, 25°C | fDCO,FLL | -1 | 1 | % | Measured at MCLK, internal trimmed REFO as reference, 3.0 V | 25 | |
| REFO absolute calibrated tolerance | fREFO | -3.5 | 3.5 | % | TA = -40°C to 85°C, 1.8 V to 3.6 V | 26 | |
| Offset error (10-bit mode) | EO | -6.5 | 6.5 | mV | Veref+ reference, 2.4 V to 3.6 V | 37 | |
| Integral linearity error (10-bit mode) | EI | -2 | 2 | LSB | Veref+ reference, 2.4 V to 3.6 V | 37 | |
| Input offset voltage (SAC0, OA) | VOS | -5 | 5 | mV | 39 | ||
| Input offset voltage (TIA0) | VOS | -5 | 5 | mV | 40 | ||
| Input offset voltage (eCOMP0) | VOFFSET | -30 | 30 | mV | CPEN = 1, CPMSEL = 0 | 38 |
CAD (KiCad official)
- Symbol:
MSP430FR2310IPW20R - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
msp430fr2310ipw20r-etched.step/msp430fr2310ipw20r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr2310ipw20r.step/msp430fr2310ipw20r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (99 pp, sha256
4b9af8e3f8ad3189, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).