Generated by kicad-footprint-generator · KiCad file format 20260206
MSP430F4260IRGZR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)
MSP430F4260IRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVSS | power_in | Digital supply voltage, negative terminal. |
| 2 | XIN | input | Input terminal of crystal oscillator XT1. |
| 3 | XOUT | output | Output terminal of crystal oscillator XT1. |
| 4 | AVSS | power_in | Analog supply voltage, negative terminal. |
| 5 | AVCC | power_in | Analog supply voltage, positive terminal. |
| 6 | VREF | power_in | Analog reference voltage. |
| 7 | P6.0/A0+ | bidirectional | General-purpose digital I/O / analog input A0+. |
| 8 | P6.1/A0− | bidirectional | General-purpose digital I/O / analog input A0−. |
| 9 | P6.2/A1+ | bidirectional | General-purpose digital I/O / analog input A1+. |
| 10 | P6.3/A1− | bidirectional | General-purpose digital I/O / analog input A1−. |
| 11 | P6.4 | bidirectional | General-purpose digital I/O. |
| 12 | P6.5 | bidirectional | General-purpose digital I/O. |
| 13 | P6.6 | bidirectional | General-purpose digital I/O. |
| 14 | P6.7 | bidirectional | General-purpose digital I/O. |
| 15 | P1.7/A2+ | bidirectional | General-purpose digital I/O / analog input A2+. |
| 16 | P1.6/A2− | bidirectional | General-purpose digital I/O / analog input A2−. |
| 17 | P1.5/TACLK/ACLK/A3+ | bidirectional | General-purpose digital I/O / Timer_A clock signal TACLK input / ACLK output (divided by 1, 2, 4, or 8) / analog input A3+. |
| 18 | P1.4/A3−/DAC0 | bidirectional | General-purpose digital I/O / analog input A3− / DAC12 output. |
| 19 | P1.3/TA2/A4+ | bidirectional | General-purpose digital I/O / Timer_A capture CCI2A, compare Out2 output / analog input A4+. |
| 20 | P1.2/TA1/A4− | bidirectional | General-purpose digital I/O / Timer_A capture CCI1A, compare Out1 output / analog input A4−. |
| 21 | P1.1/TA0/MCLK | bidirectional | General-purpose digital I/O / Timer_A capture CCI0B / MCLK output. TA0 is only an input on this pin / BSL Receive. |
| 22 | P1.0/TA0 | bidirectional | General-purpose digital I/O / Timer_A capture CCI0A input, compare Out0 output / BSL Transmit. |
| 23 | LCDREF/R13 | input | External LCD reference voltage input / input port of third most positive analog LCD level (V4 or V3). |
| 24 | LCDCAP/R23 | passive | Capacitor connection for LCD charge pump / input port of second most positive analog LCD level (V2). |
| 25 | P5.1/S0 | bidirectional | General-purpose digital I/O / LCD segment output 0. |
| 26 | P5.0/S1 | bidirectional | General-purpose digital I/O / LCD segment output 1. |
| 27 | P5.5/S2 | bidirectional | General-purpose digital I/O / LCD segment output 2. |
| 28 | P5.6/S3 | bidirectional | General-purpose digital I/O / LCD segment output 3. |
| 29 | P5.7/S4 | bidirectional | General-purpose digital I/O / LCD segment output 4. |
| 30 | S5 | output | LCD segment output 5. |
| 31 | P2.7/S6 | bidirectional | General-purpose digital I/O / LCD segment output 6. |
| 32 | P2.6/S7 | bidirectional | General-purpose digital I/O / LCD segment output 7. |
| 33 | P2.5/S8 | bidirectional | General-purpose digital I/O / LCD segment output 8. |
| 34 | P2.4/S9 | bidirectional | General-purpose digital I/O / LCD segment output 9. |
| 35 | P2.3/S10 | bidirectional | General-purpose digital I/O / LCD segment output 10. |
| 36 | P2.2/S11 | bidirectional | General-purpose digital I/O / LCD segment output 11. |
| 37 | P2.1/S12 | bidirectional | General-purpose digital I/O / LCD segment output 12. |
| 38 | P2.0/S13 | bidirectional | General-purpose digital I/O / LCD segment output 13. |
| 39 | COM0 | output | Common output, COM0−3 are used for LCD backplanes. |
| 40 | P5.2/COM1 | bidirectional | General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes. |
| 41 | P5.3/COM2 | bidirectional | General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes. |
| 42 | P5.4/COM3 | bidirectional | General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes. |
| 43 | TDO/TDI | bidirectional | Test data output port. TDO/TDI data output or programming data input terminal. |
| 44 | TDI/TCLK | input | Test data input or test clock input. The device protection fuse is connected to TDI/TCLK. |
| 45 | TMS | input | Test mode select. TMS is used as an input port for device programming and test. |
| 46 | TCK | input | Test clock. TCK is the clock input port for device programming and test. |
| 47 | RST/NMI | input | General-purpose digital I/O / reset input or nonmaskable interrupt input port. |
| 48 | DVCC | power_in | Digital supply voltage, positive terminal. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | AVCC = DVCC = VCC | 17 | |
| Supply voltage during flash memory programming | VCC | 2.5 | 3.6 | V | AVCC = DVCC = VCC | 17 | |
| Operating free-air temperature range | TA | -40 | 85 | °C | 17 | ||
| Processor frequency (signal MCLK) | f(System) | 4.15 | MHz | VCC = 1.8 V | 17 | ||
| Processor frequency (signal MCLK) | f(System) | 8 | MHz | VCC = 3.6 V | 17 | ||
| LFXT1 crystal frequency, ceramic resonator | f(LFXT1) | 450 | 8000 | kHz | XT1 selected, XTS_FLL=1, ceramic resonator | 17 | |
| LFXT1 crystal frequency, crystal | f(LFXT1) | 1000 | 8000 | kHz | XT1 selected, XTS_FLL=1, crystal | 17 | |
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | 17 | ||
| Voltage applied to any pin | -0.3 | V | referenced to VSS; upper limit printed as VCC + 0.3 V | 17 | |||
| Diode current at any device terminal | -2 | 2 | mA | 17 | |||
| Storage temperature (unprogrammed device) | Tstg | -55 | 150 | °C | unprogrammed device | 17 | |
| Storage temperature (programmed device) | Tstg | -40 | 85 | °C | programmed device | 17 | |
| Active mode supply current | I(AM) | 250 | 370 | μA | f(MCLK)=f(SMCLK)=1 MHz, VCC = 2.2 V, TA = -40°C to 85°C | 18 | |
| Active mode supply current | I(AM) | 400 | 520 | μA | f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), VCC = 3 V, TA = -40°C to 85°C | 18 | |
| Low-power mode LPM0 supply current | I(LPM0) | 55 | 70 | μA | VCC = 2.2 V, TA = -40°C to 85°C | 18 | |
| Low-power mode LPM0 supply current | I(LPM0) | 95 | 110 | μA | VCC = 3 V, TA = -40°C to 85°C | 18 | |
| Low-power mode LPM2 supply current | I(LPM2) | 11 | 14 | μA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=0, VCC = 2.2 V, TA = -40°C to 85°C | 18 | |
| Low-power mode LPM2 supply current | I(LPM2) | 17 | 22 | μA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=0, VCC = 3 V, TA = -40°C to 85°C | 18 | |
| Low-power mode LPM4 supply current | I(LPM4) | 0.1 | 0.8 | μA | f(MCLK)=0 MHz, f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1, TA = -40°C | 18 | |
| Positive-going input threshold voltage | VIT+ | 1.1 | 1.55 | V | VCC = 2.2 V | 19 | |
| Positive-going input threshold voltage | VIT+ | 1.5 | 1.98 | V | VCC = 3 V | 19 | |
| Negative-going input threshold voltage | VIT- | 0.4 | 0.9 | V | VCC = 2.2 V | 19 | |
| Negative-going input threshold voltage | VIT- | 0.9 | 1.3 | V | VCC = 3 V | 19 | |
| Input voltage hysteresis | Vhys | 0.3 | 1.1 | V | VCC = 2.2 V | 19 | |
| Input voltage hysteresis | Vhys | 0.5 | 1 | V | VCC = 3 V | 19 | |
| Leakage current, Ports P1, P2, P5, P6 | Ilkg(Px.y) | -50 | 50 | nA | VCC = 2.2 V/3 V, port pin selected as input | 19 | |
| LCD supply voltage range | VCC(LCD) | 2.2 | 3.6 | V | charge pump enabled (LCDCPEN = 1; VLCDx > 0000) | 22 | |
| LCD capacitor on LCDCAP | CLCD | 4.7 | μF | charge pump enabled (LCDCPEN = 1; VLCDx > 0000) | 22 | ||
| RAM retention supply voltage | VRAMh | 1.6 | V | CPU halted | 22 | ||
| Wake-up delay time from LPM3 | td(LPM3) | 6 | μs | f = 1 MHz, VCC = 2.2 V/3 V | 22 | ||
| Brownout reset delay time | td(BOR) | 2000 | μs | 23 | |||
| Pulse length needed at RST/NMI to accept reset | t(reset) | 2 | μs | VCC = 2.2 V/3 V | 23 | ||
| Internal reference voltage (SD16) | VREF | 1.14 | 1.2 | 1.26 | V | SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V | 30 |
| Reference supply current (SD16) | IREF | 175 | 260 | μA | SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V | 30 | |
| Internal reference temperature coefficient | TC | 18 | 50 | ppm/K | SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V | 30 | |
| Temperature sensor coefficient | TCSensor | 1.18 | 1.32 | 1.46 | mV/K | 30 | |
| External reference input voltage range | VREF(I) | 1 | 1.25 | 1.5 | V | SD16REFON = 0, VCC = 3 V | 31 |
| Analog supply voltage (SD16_A) | AVCC | 2.5 | 3.6 | V | AVCC = DVCC, AVSS = DVSS = 0 V | 28 | |
| Analog supply voltage (DAC12) | AVCC | 2.2 | 3.6 | V | AVCC = DVCC, AVSS = DVSS = 0 V | 32 | |
| DAC12 reference input resistance | Ri(VREF) | 40 | 48 | 56 | kΩ | DAC12IR=1, VCC = 2.2 V/3 V | 36 |
| Flash program and erase supply voltage | VCC(PGM/ERASE) | 2.5 | 3.6 | V | 38 | ||
| Flash timing generator frequency | fFTG | 257 | 476 | kHz | 38 | ||
| Supply current from DVCC during program | IPGM | 3 | 5 | mA | VCC = 2.5 V/3.6 V | 38 | |
| Supply current from DVCC during erase | IERASE | 3 | 7 | mA | VCC = 2.5 V/3.6 V | 38 | |
| TCK input frequency | fTCK | 0 | 5 | MHz | VCC = 2.2 V | 38 | |
| TCK input frequency | fTCK | 0 | 10 | MHz | VCC = 3 V | 38 | |
| Internal pull-up resistance on TMS, TCK, TDI/TCLK | RInternal | 25 | 60 | 90 | kΩ | VCC = 2.2 V/3 V | 38 |
| Voltage level on TDI/TCLK for fuse blow (F versions) | VFB | 6 | 7 | V | F versions | 38 |
CAD (KiCad official)
- Symbol:
MSP430F4260IRGZR - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
msp430f4260irgzr-etched.step/msp430f4260irgzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f4260irgzr.step/msp430f4260irgzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (67 pp, sha256
f9d3a21a0486f369, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).