Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430F4260IRGZR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)

MSP430F4260IRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVSS power_in Digital supply voltage, negative terminal.
2 XIN input Input terminal of crystal oscillator XT1.
3 XOUT output Output terminal of crystal oscillator XT1.
4 AVSS power_in Analog supply voltage, negative terminal.
5 AVCC power_in Analog supply voltage, positive terminal.
6 VREF power_in Analog reference voltage.
7 P6.0/A0+ bidirectional General-purpose digital I/O / analog input A0+.
8 P6.1/A0− bidirectional General-purpose digital I/O / analog input A0−.
9 P6.2/A1+ bidirectional General-purpose digital I/O / analog input A1+.
10 P6.3/A1− bidirectional General-purpose digital I/O / analog input A1−.
11 P6.4 bidirectional General-purpose digital I/O.
12 P6.5 bidirectional General-purpose digital I/O.
13 P6.6 bidirectional General-purpose digital I/O.
14 P6.7 bidirectional General-purpose digital I/O.
15 P1.7/A2+ bidirectional General-purpose digital I/O / analog input A2+.
16 P1.6/A2− bidirectional General-purpose digital I/O / analog input A2−.
17 P1.5/TACLK/ACLK/A3+ bidirectional General-purpose digital I/O / Timer_A clock signal TACLK input / ACLK output (divided by 1, 2, 4, or 8) / analog input A3+.
18 P1.4/A3−/DAC0 bidirectional General-purpose digital I/O / analog input A3− / DAC12 output.
19 P1.3/TA2/A4+ bidirectional General-purpose digital I/O / Timer_A capture CCI2A, compare Out2 output / analog input A4+.
20 P1.2/TA1/A4− bidirectional General-purpose digital I/O / Timer_A capture CCI1A, compare Out1 output / analog input A4−.
21 P1.1/TA0/MCLK bidirectional General-purpose digital I/O / Timer_A capture CCI0B / MCLK output. TA0 is only an input on this pin / BSL Receive.
22 P1.0/TA0 bidirectional General-purpose digital I/O / Timer_A capture CCI0A input, compare Out0 output / BSL Transmit.
23 LCDREF/R13 input External LCD reference voltage input / input port of third most positive analog LCD level (V4 or V3).
24 LCDCAP/R23 passive Capacitor connection for LCD charge pump / input port of second most positive analog LCD level (V2).
25 P5.1/S0 bidirectional General-purpose digital I/O / LCD segment output 0.
26 P5.0/S1 bidirectional General-purpose digital I/O / LCD segment output 1.
27 P5.5/S2 bidirectional General-purpose digital I/O / LCD segment output 2.
28 P5.6/S3 bidirectional General-purpose digital I/O / LCD segment output 3.
29 P5.7/S4 bidirectional General-purpose digital I/O / LCD segment output 4.
30 S5 output LCD segment output 5.
31 P2.7/S6 bidirectional General-purpose digital I/O / LCD segment output 6.
32 P2.6/S7 bidirectional General-purpose digital I/O / LCD segment output 7.
33 P2.5/S8 bidirectional General-purpose digital I/O / LCD segment output 8.
34 P2.4/S9 bidirectional General-purpose digital I/O / LCD segment output 9.
35 P2.3/S10 bidirectional General-purpose digital I/O / LCD segment output 10.
36 P2.2/S11 bidirectional General-purpose digital I/O / LCD segment output 11.
37 P2.1/S12 bidirectional General-purpose digital I/O / LCD segment output 12.
38 P2.0/S13 bidirectional General-purpose digital I/O / LCD segment output 13.
39 COM0 output Common output, COM0−3 are used for LCD backplanes.
40 P5.2/COM1 bidirectional General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes.
41 P5.3/COM2 bidirectional General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes.
42 P5.4/COM3 bidirectional General-purpose digital I/O / common output, COM0−3 are used for LCD backplanes.
43 TDO/TDI bidirectional Test data output port. TDO/TDI data output or programming data input terminal.
44 TDI/TCLK input Test data input or test clock input. The device protection fuse is connected to TDI/TCLK.
45 TMS input Test mode select. TMS is used as an input port for device programming and test.
46 TCK input Test clock. TCK is the clock input port for device programming and test.
47 RST/NMI input General-purpose digital I/O / reset input or nonmaskable interrupt input port.
48 DVCC power_in Digital supply voltage, positive terminal.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage during program execution VCC 1.8 3.6 V AVCC = DVCC = VCC 17
Supply voltage during flash memory programming VCC 2.5 3.6 V AVCC = DVCC = VCC 17
Operating free-air temperature range TA -40 85 °C 17
Processor frequency (signal MCLK) f(System) 4.15 MHz VCC = 1.8 V 17
Processor frequency (signal MCLK) f(System) 8 MHz VCC = 3.6 V 17
LFXT1 crystal frequency, ceramic resonator f(LFXT1) 450 8000 kHz XT1 selected, XTS_FLL=1, ceramic resonator 17
LFXT1 crystal frequency, crystal f(LFXT1) 1000 8000 kHz XT1 selected, XTS_FLL=1, crystal 17
Voltage applied at VCC to VSS VCC -0.3 4.1 V 17
Voltage applied to any pin -0.3 V referenced to VSS; upper limit printed as VCC + 0.3 V 17
Diode current at any device terminal -2 2 mA 17
Storage temperature (unprogrammed device) Tstg -55 150 °C unprogrammed device 17
Storage temperature (programmed device) Tstg -40 85 °C programmed device 17
Active mode supply current I(AM) 250 370 μA f(MCLK)=f(SMCLK)=1 MHz, VCC = 2.2 V, TA = -40°C to 85°C 18
Active mode supply current I(AM) 400 520 μA f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), VCC = 3 V, TA = -40°C to 85°C 18
Low-power mode LPM0 supply current I(LPM0) 55 70 μA VCC = 2.2 V, TA = -40°C to 85°C 18
Low-power mode LPM0 supply current I(LPM0) 95 110 μA VCC = 3 V, TA = -40°C to 85°C 18
Low-power mode LPM2 supply current I(LPM2) 11 14 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=0, VCC = 2.2 V, TA = -40°C to 85°C 18
Low-power mode LPM2 supply current I(LPM2) 17 22 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=0, VCC = 3 V, TA = -40°C to 85°C 18
Low-power mode LPM4 supply current I(LPM4) 0.1 0.8 μA f(MCLK)=0 MHz, f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1, TA = -40°C 18
Positive-going input threshold voltage VIT+ 1.1 1.55 V VCC = 2.2 V 19
Positive-going input threshold voltage VIT+ 1.5 1.98 V VCC = 3 V 19
Negative-going input threshold voltage VIT- 0.4 0.9 V VCC = 2.2 V 19
Negative-going input threshold voltage VIT- 0.9 1.3 V VCC = 3 V 19
Input voltage hysteresis Vhys 0.3 1.1 V VCC = 2.2 V 19
Input voltage hysteresis Vhys 0.5 1 V VCC = 3 V 19
Leakage current, Ports P1, P2, P5, P6 Ilkg(Px.y) -50 50 nA VCC = 2.2 V/3 V, port pin selected as input 19
LCD supply voltage range VCC(LCD) 2.2 3.6 V charge pump enabled (LCDCPEN = 1; VLCDx > 0000) 22
LCD capacitor on LCDCAP CLCD 4.7 μF charge pump enabled (LCDCPEN = 1; VLCDx > 0000) 22
RAM retention supply voltage VRAMh 1.6 V CPU halted 22
Wake-up delay time from LPM3 td(LPM3) 6 μs f = 1 MHz, VCC = 2.2 V/3 V 22
Brownout reset delay time td(BOR) 2000 μs 23
Pulse length needed at RST/NMI to accept reset t(reset) 2 μs VCC = 2.2 V/3 V 23
Internal reference voltage (SD16) VREF 1.14 1.2 1.26 V SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V 30
Reference supply current (SD16) IREF 175 260 μA SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V 30
Internal reference temperature coefficient TC 18 50 ppm/K SD16REFON = 1, SD16VMIDON = 0, VCC = 3 V 30
Temperature sensor coefficient TCSensor 1.18 1.32 1.46 mV/K 30
External reference input voltage range VREF(I) 1 1.25 1.5 V SD16REFON = 0, VCC = 3 V 31
Analog supply voltage (SD16_A) AVCC 2.5 3.6 V AVCC = DVCC, AVSS = DVSS = 0 V 28
Analog supply voltage (DAC12) AVCC 2.2 3.6 V AVCC = DVCC, AVSS = DVSS = 0 V 32
DAC12 reference input resistance Ri(VREF) 40 48 56 kΩ DAC12IR=1, VCC = 2.2 V/3 V 36
Flash program and erase supply voltage VCC(PGM/ERASE) 2.5 3.6 V 38
Flash timing generator frequency fFTG 257 476 kHz 38
Supply current from DVCC during program IPGM 3 5 mA VCC = 2.5 V/3.6 V 38
Supply current from DVCC during erase IERASE 3 7 mA VCC = 2.5 V/3.6 V 38
TCK input frequency fTCK 0 5 MHz VCC = 2.2 V 38
TCK input frequency fTCK 0 10 MHz VCC = 3 V 38
Internal pull-up resistance on TMS, TCK, TDI/TCLK RInternal 25 60 90 kΩ VCC = 2.2 V/3 V 38
Voltage level on TDI/TCLK for fuse blow (F versions) VFB 6 7 V F versions 38

CAD (KiCad official)

  • Symbol: MSP430F4260IRGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: msp430f4260irgzr-etched.step / msp430f4260irgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f4260irgzr.step / msp430f4260irgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (67 pp, sha256 f9d3a21a0486f369, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF