component
MSP430F413IPMR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMSP430F413IPMR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
MSP430F413IPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Digital supply voltage, positive terminal supplying all parts except those supplied via AVCC. |
| 2 | P6.3 | bidirectional | General-purpose digital I/O. |
| 3 | P6.4 | bidirectional | General-purpose digital I/O. |
| 4 | P6.5 | bidirectional | General-purpose digital I/O. |
| 5 | P6.6 | bidirectional | General-purpose digital I/O. |
| 6 | P6.7 | bidirectional | General-purpose digital I/O. |
| 7 | NC | unconnected | Not internally connected; connection to VSS recommended. |
| 8 | XIN | input | Input port for crystal oscillator XT1; standard or watch crystals can be connected. |
| 9 | XOUT | output | Output terminal of crystal oscillator XT1. |
| 10 | NC | unconnected | Not internally connected; connection to VSS recommended. |
| 11 | NC | unconnected | Not internally connected; connection to VSS recommended. |
| 12 | P5.1/S0 | bidirectional | General-purpose digital I/O or LCD segment output 0 when LCD mode enabled. |
| 13 | P5.0/S1 | bidirectional | General-purpose digital I/O or LCD segment output 1 when LCD mode enabled. |
| 14 | P4.7/S2 | bidirectional | General-purpose digital I/O or LCD segment output 2 when LCD mode enabled. |
| 15 | P4.6/S3 | bidirectional | General-purpose digital I/O or LCD segment output 3 when LCD mode enabled. |
| 16 | P4.5/S4 | bidirectional | General-purpose digital I/O or LCD segment output 4 when LCD mode enabled. |
| 17 | P4.4/S5 | bidirectional | General-purpose digital I/O or LCD segment output 5 when LCD mode enabled. |
| 18 | P4.3/S6 | bidirectional | General-purpose digital I/O or LCD segment output 6 when LCD mode enabled. |
| 19 | P4.2/S7 | bidirectional | General-purpose digital I/O or LCD segment output 7 when LCD mode enabled. |
| 20 | P4.1/S8 | bidirectional | General-purpose digital I/O or LCD segment output 8 when LCD mode enabled. |
| 21 | P4.0/S9 | bidirectional | General-purpose digital I/O or LCD segment output 9 when LCD mode enabled. |
| 22 | P3.7/S10 | bidirectional | General-purpose digital I/O or LCD segment output 10 when LCD mode enabled. |
| 23 | P3.6/S11 | bidirectional | General-purpose digital I/O or LCD segment output 11 when LCD mode enabled. |
| 24 | P3.5/S12 | bidirectional | General-purpose digital I/O or LCD segment output 12 when LCD mode enabled. |
| 25 | P3.4/S13 | bidirectional | General-purpose digital I/O or LCD segment output 13 when LCD mode enabled. |
| 26 | P3.3/S14 | bidirectional | General-purpose digital I/O or LCD segment output 14 when LCD mode enabled. |
| 27 | P3.2/S15 | bidirectional | General-purpose digital I/O or LCD segment output 15 when LCD mode enabled. |
| 28 | P3.1/S16 | bidirectional | General-purpose digital I/O or LCD segment output 16 when LCD mode enabled. |
| 29 | P3.0/S17 | bidirectional | General-purpose digital I/O or LCD segment output 17 when LCD mode enabled. |
| 30 | P2.7/S18 | bidirectional | General-purpose digital I/O or LCD segment output 18 when LCD mode enabled. |
| 31 | P2.6/CAOUT/S19 | bidirectional | General-purpose digital I/O or comparator_A output or LCD segment output 19 when LCD mode enabled. |
| 32 | P2.5/S20 | bidirectional | General-purpose digital I/O or LCD segment output 20 when LCD mode enabled. |
| 33 | P2.4/S21 | bidirectional | General-purpose digital I/O or LCD segment output 21 when LCD mode enabled. |
| 34 | P2.3/S22 | bidirectional | General-purpose digital I/O or LCD segment output 22 when LCD mode enabled. |
| 35 | P2.2/S23 | bidirectional | General-purpose digital I/O or LCD segment output 23 when LCD mode enabled. |
| 36 | COM0 | output | Common output for LCD backplanes COM0-3. |
| 37 | P5.2/COM1 | bidirectional | General-purpose digital I/O or common output for LCD backplanes COM0-3. |
| 38 | P5.3/COM2 | bidirectional | General-purpose digital I/O or common output for LCD backplanes COM0-3. |
| 39 | P5.4/COM3 | bidirectional | General-purpose digital I/O or common output for LCD backplanes COM0-3. |
| 40 | R03 | input | Input port for fourth positive (lowest) analog LCD level (V5). |
| 41 | P5.5/R13 | bidirectional | General-purpose digital I/O or input port for third most positive analog LCD level (V4 or V3). |
| 42 | P5.6/R23 | bidirectional | General-purpose digital I/O or input port for second most positive analog LCD level (V2). |
| 43 | P5.7/R33 | bidirectional | General-purpose digital I/O or output port for most positive analog LCD level (V1). |
| 44 | P2.1 | bidirectional | General-purpose digital I/O. |
| 45 | P2.0/TA2 | bidirectional | General-purpose digital I/O or Timer_A capture input (CCI2A) or compare output (Out2). |
| 46 | P1.7/CA1 | bidirectional | General-purpose digital I/O or comparator_A input. |
| 47 | P1.6/CA0 | bidirectional | General-purpose digital I/O or comparator_A input. |
| 48 | P1.5/TACLK/ACLK | bidirectional | General-purpose digital I/O or Timer_A clock input or ACLK output. |
| 49 | P1.4 | bidirectional | General-purpose digital I/O. |
| 50 | P1.3/SVSOUT | bidirectional | General-purpose digital I/O or SVS comparator output. |
| 51 | P1.2/TA1 | bidirectional | General-purpose digital I/O or Timer_A capture input (CCI1A) or compare output (Out1). |
| 52 | P1.1/TA0/MCLK | bidirectional | General-purpose digital I/O or Timer_A capture input (CCI0B) or MCLK output; TA0 is input only on this pin. |
| 53 | P1.0/TA0 | bidirectional | General-purpose digital I/O or Timer_A capture input (CCI0A) or compare output (Out0). |
| 54 | TDO/TDI | bidirectional | Test data output or programming data input terminal. |
| 55 | TDI/TCLK | input | Test data input or test clock input; device protection fuse connected to TDI. |
| 56 | TMS | input | Test mode select input for device programming and test. |
| 57 | TCK | input | Test clock input for device programming and test. |
| 58 | RST/NMI | input | Reset input or nonmaskable interrupt input. |
| 59 | P6.0 | bidirectional | General-purpose digital I/O. |
| 60 | P6.1 | bidirectional | General-purpose digital I/O. |
| 61 | P6.2 | bidirectional | General-purpose digital I/O. |
| 62 | AVSS | power_in | Negative terminal supplying SVS, brownout, oscillator, and comparator_A; must be externally connected to DVSS. |
| 63 | DVSS | power_in | Digital supply voltage, negative terminal supplying all digital parts except those supplied via AVCC/AVSS. |
| 64 | AVCC | power_in | Positive terminal supplying SVS, brownout, oscillator, comparator_A, port 1, and LCD resistive divider circuitry; must not power up prior to DVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
MSP430F413IPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
msp430f413ipmr-etched.step/msp430f413ipmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f413ipmr.step/msp430f413ipmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (66 pp, sha256
221c0acc6935c96a, retrieved 2026-10-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).