main
History Download
Ray Publish 0.1.0 07367dd

MS1243

Hangzhou Ruimeng Tech · Analog To Digital Converters (ADCs) · TSSOP-20

MS1243 from Hangzhou Ruimeng Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input; the datasheet specifies VDD of 2.7 V to 5.25 V for the electrical characteristics and an absolute maximum of -0.3 V to 6 V.
2 XIN input Clock input for the on-chip oscillator, used with a crystal or external clock; the main clock frequency fosc must be 1 MHz to 5 MHz.
3 XOUT output Clock output for the crystal oscillator; per the clock generator description, an external clock is applied at this pin when no crystal is used, and 10 pF to 20 pF capacitors are required on the MCLK and XTAL pins when a crystal is fitted.
4 PDWN input Power-down control input, active low.
5 VREF+ power_in Positive analog reference voltage input; the differential reference (REFP minus REFN) must not exceed the supply voltage and is limited to 2.5 V at VDD = 5 V with RANGE = 0 or 1.25 V at VDD = 3 V with RANGE = 0.
6 VREF- power_in Negative analog reference voltage input; it forms the differential reference with VREF+, with REF range 0.1 V to VDD per the electrical characteristics.
7 AIN0/D0 input Analog input channel 0 that doubles as data I/O bit D0; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
8 AIN1/D1 input Analog input channel 1 that doubles as data I/O bit D1; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
9 AIN2/D2 input Analog input channel 2 that doubles as data I/O bit D2; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
10 AIN3/D3 input Analog input channel 3 that doubles as data I/O bit D3; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
11 AIN4/D4 input Analog input channel 4 that doubles as data I/O bit D4; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
12 AIN5/D5 input Analog input channel 5 that doubles as data I/O bit D5; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
13 AIN6/D6 input Analog input channel 6 that doubles as data I/O bit D6; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
14 AIN7/D7 input Analog input channel 7 that doubles as data I/O bit D7; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V.
15 GND power_in Ground reference for the device.
16 CS input SPI chip select input, active low; it must be held low for the whole communication, and the SPI bus resets when CS goes high.
17 DIN input SPI serial data input, sampled on SCLK edges.
18 DOUT output SPI serial data output; it is high-impedance when not in use, which allows DIN and DOUT to be tied together on a bidirectional bus.
19 SCLK input SPI serial clock input with Schmitt-trigger input, used to sample DIN and drive DOUT; it must be free of noise.
20 DRDY output Data-ready output, active low; it goes low when new conversion data is available in the data output register and goes high after the register is read or while it is being updated.

Key specifications

Parameter Value
Manufacturer Hangzhou Ruimeng Tech
Package TSSOP-20
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (absolute maximum) VDD -0.3 6 V 5
Input current (instantaneous) Iin 100 mA 瞬时 5
Input current (continuous) Iin 10 mA 连续 5
Analog input voltage (min; max is VDD+0.5) Ain -0.5 V 5
Digital input voltage (min; max is VDD+0.3) Din -0.3 V 5
Digital output voltage (min; max is VDD+0.3) Dout -0.3 V 5
Maximum junction temperature Jt 150 C 5
Operating temperature (absolute maximum table) TA -40 85 C 5
Storage temperature Tstg -60 100 C 5
Digital input high leakage current IIH 10 uA 5
Digital input low leakage current IIL -10 uA 5
Master clock frequency fosc 1 5 MHz 5
Master clock period Tosc 200 1000 ns 1/fOSC 5
Integral nonlinearity (5 V) -0.0015 0.0015 % of FS 6
Offset DAC gain error (5 V) -10 10 % 7
Supply voltage VDD (5 V grade) VDD 4.75 5.25 V 7
Supply current, 5 V 240 375 uA PGA = 1, Buffer 关闭 7
Supply current, 5 V 450 800 uA PGA = 128, Buffer 关闭 7
Supply current, 5 V 290 425 uA PGA = 1, Buffer 打开 7
Supply current, 5 V 960 1400 uA PGA = 128, Buffer 打开 7
Power consumption, 5 V 1.2 1.9 mW PGA = 1, Buffer 关闭 7
Operating temperature range -40 85 C 工作 7
Reference voltage REF, RANGE = 0 (5 V) REF 0.1 2.5 2.6 V REF = REFP - REFN, RANGE = 0 6
Reference voltage REF, RANGE = 1 (5 V; max is VDD) REF 0.1 V REF = REFP - REFN, RANGE = 1 6
REFP, REFN input range, RANGE = 0 (5 V; max is VDD) 0 V RANGE = 0 6
REFP, REFN input range, RANGE = 1 (5 V; max is VDD) 0 V RANGE = 1 6
Supply voltage VDD (3 V grade) VDD 2.7 3.3 V 9
Reference voltage REF, RANGE = 0 (3 V) REF 0.1 1.25 1.26 V REF = REFP - REFN, RANGE = 0 8
Reference voltage REF, RANGE = 1 (3 V) REF 0.1 2.5 2.6 V REF = REFP - REFN, RANGE = 1 8
REFP, REFN input range, RANGE = 0 (3 V; max is VDD) 0 V RANGE = 0 8
REFP, REFN input range, RANGE = 1 (3 V; max is VDD) 0 V RANGE = 1 8
Supply current, 3 V 190 375 uA PGA = 1, Buffer 关闭 9
Supply current, 3 V 460 700 uA PGA = 128, Buffer 关闭 9
Supply current, 3 V 240 375 uA PGA = 1, Buffer 打开 9
Supply current, 3 V 870 1325 uA PGA = 128, Buffer 打开 9
Power consumption, 3 V 0.6 1.2 mW PGA = 1, Buffer 关闭 9
SCLK clock period t1 4 tosc 周期 10
SCLK pulse width, high and low t2 200 ns 10
CS falling edge to first SCLK edge setup t3 0 ns 10
DIN data setup time t4 50 ns 10
DIN data hold time t5 50 ns 10
Last SCLK edge of DIN to first SCLK edge of SDO t6 50 tosc 周期 RDATA, RDATAC, RREG, WREG 10
SDO output delay from SCLK t7 50 ns 10
SDO data hold time t8 0 ns 10
SDO tri-state delay from SCLK edge t9 6 10 tosc 周期 10
CS hold low after last SCLK edge t10 0 ns 10
Last SCLK edge to next command first SCLK edge t11 4 tosc 周期 RREG, WREG, SYNC, SLEEP, RDATA, RDATAC, STOPC 10
Last SCLK edge to next command first SCLK edge (calibration) 8 DRDY 周期 OCALSYS, GCALSYS 11
Reset command pulse 16 tosc 周期 RESET 11
Pulse width t16 4 tosc 周期 11
Allowed analog input change to next valid conversion t17 5000 tosc 周期 11
DOR update, DOR invalid t18 4 tosc 周期 11
First SCLK after DRDY low t19 10 tosc 周期 RDATAC 模式 11
First SCLK after DRDY low t19 0 tosc 周期 其他模式 11

CAD (KiCad official)

  • Symbol: MS1243
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: ms1243-etched.step / ms1243-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ms1243.step / ms1243.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Hangzhou Ruimeng Tech datasheet (27 pp, sha256 150cce2e87cea6bc, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF