Generated by kicad-footprint-generator · KiCad file format 20260206
MS1243
Hangzhou Ruimeng Tech · Analog To Digital Converters (ADCs) · TSSOP-20
MS1243 from Hangzhou Ruimeng Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the datasheet specifies VDD of 2.7 V to 5.25 V for the electrical characteristics and an absolute maximum of -0.3 V to 6 V. |
| 2 | XIN | input | Clock input for the on-chip oscillator, used with a crystal or external clock; the main clock frequency fosc must be 1 MHz to 5 MHz. |
| 3 | XOUT | output | Clock output for the crystal oscillator; per the clock generator description, an external clock is applied at this pin when no crystal is used, and 10 pF to 20 pF capacitors are required on the MCLK and XTAL pins when a crystal is fitted. |
| 4 | PDWN | input | Power-down control input, active low. |
| 5 | VREF+ | power_in | Positive analog reference voltage input; the differential reference (REFP minus REFN) must not exceed the supply voltage and is limited to 2.5 V at VDD = 5 V with RANGE = 0 or 1.25 V at VDD = 3 V with RANGE = 0. |
| 6 | VREF- | power_in | Negative analog reference voltage input; it forms the differential reference with VREF+, with REF range 0.1 V to VDD per the electrical characteristics. |
| 7 | AIN0/D0 | input | Analog input channel 0 that doubles as data I/O bit D0; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 8 | AIN1/D1 | input | Analog input channel 1 that doubles as data I/O bit D1; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 9 | AIN2/D2 | input | Analog input channel 2 that doubles as data I/O bit D2; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 10 | AIN3/D3 | input | Analog input channel 3 that doubles as data I/O bit D3; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 11 | AIN4/D4 | input | Analog input channel 4 that doubles as data I/O bit D4; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 12 | AIN5/D5 | input | Analog input channel 5 that doubles as data I/O bit D5; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 13 | AIN6/D6 | input | Analog input channel 6 that doubles as data I/O bit D6; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 14 | AIN7/D7 | input | Analog input channel 7 that doubles as data I/O bit D7; the port defaults to analog input at power-up, and analog inputs are rated from -0.5 V to VDD + 0.5 V. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | CS | input | SPI chip select input, active low; it must be held low for the whole communication, and the SPI bus resets when CS goes high. |
| 17 | DIN | input | SPI serial data input, sampled on SCLK edges. |
| 18 | DOUT | output | SPI serial data output; it is high-impedance when not in use, which allows DIN and DOUT to be tied together on a bidirectional bus. |
| 19 | SCLK | input | SPI serial clock input with Schmitt-trigger input, used to sample DIN and drive DOUT; it must be free of noise. |
| 20 | DRDY | output | Data-ready output, active low; it goes low when new conversion data is available in the data output register and goes high after the register is read or while it is being updated. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | TSSOP-20 |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | 6 | V | 5 | ||
| Input current (instantaneous) | Iin | 100 | mA | 瞬时 | 5 | ||
| Input current (continuous) | Iin | 10 | mA | 连续 | 5 | ||
| Analog input voltage (min; max is VDD+0.5) | Ain | -0.5 | V | 5 | |||
| Digital input voltage (min; max is VDD+0.3) | Din | -0.3 | V | 5 | |||
| Digital output voltage (min; max is VDD+0.3) | Dout | -0.3 | V | 5 | |||
| Maximum junction temperature | Jt | 150 | C | 5 | |||
| Operating temperature (absolute maximum table) | TA | -40 | 85 | C | 5 | ||
| Storage temperature | Tstg | -60 | 100 | C | 5 | ||
| Digital input high leakage current | IIH | 10 | uA | 5 | |||
| Digital input low leakage current | IIL | -10 | uA | 5 | |||
| Master clock frequency | fosc | 1 | 5 | MHz | 5 | ||
| Master clock period | Tosc | 200 | 1000 | ns | 1/fOSC | 5 | |
| Integral nonlinearity (5 V) | -0.0015 | 0.0015 | % of FS | 6 | |||
| Offset DAC gain error (5 V) | -10 | 10 | % | 7 | |||
| Supply voltage VDD (5 V grade) | VDD | 4.75 | 5.25 | V | 7 | ||
| Supply current, 5 V | 240 | 375 | uA | PGA = 1, Buffer 关闭 | 7 | ||
| Supply current, 5 V | 450 | 800 | uA | PGA = 128, Buffer 关闭 | 7 | ||
| Supply current, 5 V | 290 | 425 | uA | PGA = 1, Buffer 打开 | 7 | ||
| Supply current, 5 V | 960 | 1400 | uA | PGA = 128, Buffer 打开 | 7 | ||
| Power consumption, 5 V | 1.2 | 1.9 | mW | PGA = 1, Buffer 关闭 | 7 | ||
| Operating temperature range | -40 | 85 | C | 工作 | 7 | ||
| Reference voltage REF, RANGE = 0 (5 V) | REF | 0.1 | 2.5 | 2.6 | V | REF = REFP - REFN, RANGE = 0 | 6 |
| Reference voltage REF, RANGE = 1 (5 V; max is VDD) | REF | 0.1 | V | REF = REFP - REFN, RANGE = 1 | 6 | ||
| REFP, REFN input range, RANGE = 0 (5 V; max is VDD) | 0 | V | RANGE = 0 | 6 | |||
| REFP, REFN input range, RANGE = 1 (5 V; max is VDD) | 0 | V | RANGE = 1 | 6 | |||
| Supply voltage VDD (3 V grade) | VDD | 2.7 | 3.3 | V | 9 | ||
| Reference voltage REF, RANGE = 0 (3 V) | REF | 0.1 | 1.25 | 1.26 | V | REF = REFP - REFN, RANGE = 0 | 8 |
| Reference voltage REF, RANGE = 1 (3 V) | REF | 0.1 | 2.5 | 2.6 | V | REF = REFP - REFN, RANGE = 1 | 8 |
| REFP, REFN input range, RANGE = 0 (3 V; max is VDD) | 0 | V | RANGE = 0 | 8 | |||
| REFP, REFN input range, RANGE = 1 (3 V; max is VDD) | 0 | V | RANGE = 1 | 8 | |||
| Supply current, 3 V | 190 | 375 | uA | PGA = 1, Buffer 关闭 | 9 | ||
| Supply current, 3 V | 460 | 700 | uA | PGA = 128, Buffer 关闭 | 9 | ||
| Supply current, 3 V | 240 | 375 | uA | PGA = 1, Buffer 打开 | 9 | ||
| Supply current, 3 V | 870 | 1325 | uA | PGA = 128, Buffer 打开 | 9 | ||
| Power consumption, 3 V | 0.6 | 1.2 | mW | PGA = 1, Buffer 关闭 | 9 | ||
| SCLK clock period | t1 | 4 | tosc 周期 | 10 | |||
| SCLK pulse width, high and low | t2 | 200 | ns | 10 | |||
| CS falling edge to first SCLK edge setup | t3 | 0 | ns | 10 | |||
| DIN data setup time | t4 | 50 | ns | 10 | |||
| DIN data hold time | t5 | 50 | ns | 10 | |||
| Last SCLK edge of DIN to first SCLK edge of SDO | t6 | 50 | tosc 周期 | RDATA, RDATAC, RREG, WREG | 10 | ||
| SDO output delay from SCLK | t7 | 50 | ns | 10 | |||
| SDO data hold time | t8 | 0 | ns | 10 | |||
| SDO tri-state delay from SCLK edge | t9 | 6 | 10 | tosc 周期 | 10 | ||
| CS hold low after last SCLK edge | t10 | 0 | ns | 10 | |||
| Last SCLK edge to next command first SCLK edge | t11 | 4 | tosc 周期 | RREG, WREG, SYNC, SLEEP, RDATA, RDATAC, STOPC | 10 | ||
| Last SCLK edge to next command first SCLK edge (calibration) | 8 | DRDY 周期 | OCALSYS, GCALSYS | 11 | |||
| Reset command pulse | 16 | tosc 周期 | RESET | 11 | |||
| Pulse width | t16 | 4 | tosc 周期 | 11 | |||
| Allowed analog input change to next valid conversion | t17 | 5000 | tosc 周期 | 11 | |||
| DOR update, DOR invalid | t18 | 4 | tosc 周期 | 11 | |||
| First SCLK after DRDY low | t19 | 10 | tosc 周期 | RDATAC 模式 | 11 | ||
| First SCLK after DRDY low | t19 | 0 | tosc 周期 | 其他模式 | 11 |
CAD (KiCad official)
- Symbol:
MS1243 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
ms1243-etched.step/ms1243-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms1243.step/ms1243.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (27 pp, sha256
150cce2e87cea6bc, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).