MR45V032AMAZBATL

{
  "slug": "mr45v032amazbatl",
  "version": "0.1.0",
  "type": "component",
  "description": "ROHM Semicon Pre-ordered Chips, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "mr45v032amazbatl",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mr45v032amazbatl.kicad_sym",
    "mr45v032amazbatl.kicad_mod",
    "mr45v032amazbatl.glb",
    "mr45v032amazbatl.step",
    "mr45v032amazbatl.lbr",
    "docs/hero.png",
    "docs/mr45v032amazbatl-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mr45v032amazbatl-hero.glb",
    "mr45v032amazbatl-hero.overlay.json",
    "mr45v032amazbatl-etched.glb"
  ],
  "component": {
    "mpn": "MR45V032AMAZBATL",
    "manufacturer": "ROHM Semicon",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d0382edef40876b162f63dde63ffc30c.pdf",
    "parts": {
      "symbol": "mr45v032amazbatl.kicad_sym",
      "footprint": "mr45v032amazbatl.kicad_mod",
      "model_3d": "mr45v032amazbatl-hero.glb",
      "model_3d_plain": "mr45v032amazbatl-etched.glb",
      "model_3d_step": "mr45v032amazbatl-etched.step",
      "model_3d_step_plain": "mr45v032amazbatl.step",
      "lbr": "mr45v032amazbatl.lbr"
    },
    "distributor_links": {
      "lcsc": "C2062077",
      "digikey": "MR45V032AMAZBATR-ND",
      "mouser": "755-MR45V032AMAZBATL"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T23:36:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MR45V032AMAZBATR-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "755-MR45V032AMAZBATL",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip Select (negative logic): a low input latches the address, activates the FeRAM, and enables a read or write operation; CS# should be low during hold operation."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "tri_state",
        "description": "Serial output; the pin is High-Z when CS# is not active or when HOLD# is low."
      },
      {
        "number": "3",
        "name": "WP#",
        "type": "input",
        "description": "Write Protect (negative logic) controls write operations to the status register (BP0, BP1) and should be fixed low or high during write operations."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; connect to system ground (0 V)."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial input for operation code, addresses, and data; SI is don't care while HOLD# is low."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input; inputs are latched on the rising edge and outputs occur on the falling edge, with operating frequency up to 15 MHz."
      },
      {
        "number": "7",
        "name": "HOLD#",
        "type": "input",
        "description": "Hold (negative logic) suspends serial communication without disabling the chip; when low, SO is High-Z and SI/SCK are don't care, and CS# must remain low."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply; the specified recommended operating range is 2.7 V to 3.6 V (3.3 V typ)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not list ordering part numbers, so the suffix in MPN MR45V032AMAZBATL (including ; Pin numbers were taken from the ASCII pin-configuration diagram on page 2 (pins 1-4 down the left, 5; SO was typed as tri_state because the datasheet describes High-Z output states; the datasheet itself"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0499,
        "at": "2026-10-30T23:36:00"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d0382edef40876b162f63dde63ffc30c.pdf",
        "pages": 20,
        "sha256": "38a1609a7ee1eb3e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mr45v032amazbatl.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mr45v032amazbatl-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "37934a1e907de6a3e608ed4a638a71ed117be29978c3e1ee7cb5b736e8fab0cb",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}