main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mpq4436gre-aec1-z: viewers · Ray
mpq4436gre-aec1-z-etched.glb Publish 0.1.0 · Ray
mpq4436gre-aec1-z-etched.step mpq4436gre-aec1-z: factory component page (tier=lcsc) · Ray
mpq4436gre-aec1-z-hero.glb mpq4436gre-aec1-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mpq4436gre-aec1-z-hero.overlay.json Publish 0.1.0 · Ray
mpq4436gre-aec1-z.glb Publish 0.1.0 · Ray
mpq4436gre-aec1-z.kicad_mod Publish 0.1.0 · Ray
mpq4436gre-aec1-z.kicad_sym Publish 0.1.0 · Ray
mpq4436gre-aec1-z.lbr Publish 0.1.0 · Ray
mpq4436gre-aec1-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 21 pins · Ray

MPQ4436GRE-AEC1-Z

Monolithic Power Systems · DC-DC Converters · QFN-20(4x4)

MPQ4436GRE-AEC1-Z from Monolithic Power Systems, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MODE input AAM or FCCM select pin: pull high for FCCM and pull low for AAM at light load, and do not leave it floating.
2 SYNCIN input SYNC input that accepts a 350kHz to 1000kHz clock to synchronize the oscillator, connects through a 51kΩ resistor to GND, and must be tied to GND if unused rather than left floating.
3 VIN power_in Input supply that powers the internal control circuitry and the power switch connected to SW, with a decoupling capacitor to ground placed close to this pin.
4 PGND power_in Power ground for the power stage.
5 PGND power_in Power ground for the power stage.
6 BST power_out Bootstrap pin that supplies the high-side MOSFET driver, with a bypass capacitor connected between BST and SW.
7 SW power_out Switch node that is the output of the internal power switch.
8 SW power_out Switch node that is the output of the internal power switch.
9 EN input Enable input that shuts the chip down when pulled below 0.85V and enables it when pulled above 1V.
10 PGND power_in Power ground for the power stage.
11 PGND power_in Power ground for the power stage.
12 VIN power_in Input supply that powers the internal control circuitry and the power switch connected to SW, with a decoupling capacitor to ground placed close to this pin.
13 SYNCO output SYNC output that provides a clock 180° out of phase with the internal oscillator or the SYNCIN clock, and is left floating if not used.
14 PG output Open-drain power good output that requires a pull-up resistor to the power source when used, going high when the output is within 93% to 106% of nominal and low when above 107.5% or below 91%.
15 ICS passive Current sharing pin that must not float and should connect to VCC or to VOUT at least 3V in a single-phase application.
16 VCC power_in Bias supply that powers the internal control circuit and gate drivers, requiring a decoupling capacitor to ground close to this pin.
17 AGND power_in Analog ground for the control circuitry.
18 FB input Feedback input connected to the center of the output resistor divider to AGND, with a feedback threshold voltage of 0.815V.
19 SS passive Soft-start input with a capacitor from SS to GND that sets the soft-start period, where the device sources 6µA into the capacitor at start-up.
20 FREQ passive Switching frequency program pin with a resistor from this pin to ground that sets the switching frequency per the fSW vs. RFREQ curve.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-20(4x4)
Category Power Management
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN UVLO rising threshold INUVLO_RISING 2.8 3 3.2 V 6
VIN UVLO falling threshold INUVLO_FALLING 2.45 2.65 2.85 V 6
VCC voltage VCC 4.6 4.9 5.2 V IVCC = 0A 6
VIN quiescent current (sleep mode) IQ 18 26 uA FB = 0.85V, no load, (sleep mode) 6
VIN shutdown current ISHDN 1.7 2.5 uA EN = 0V 6
FB voltage VFB 0.807 0.815 0.823 V VIN = 3.3V to 45V, TJ = 25°C 6
FB voltage VFB 0.799 0.815 0.831 V VIN = 3.3V to 45V 6
FB current IFB -50 0 50 nA VFB = 0.85V 6
Switching frequency fSW 420 470 520 kHz RFREQ = 62kΩ 6
SYNCIN clock range fSYNC 350 1000 kHz External clock 6
SYNCO high voltage VSYNCO_HIGH 3.3 4.5 V ISYNCO = -1mA 6
HS current limit ILIMIT 10 13 16 A Duty cycle = 30% 6
LS valley current limit ILIMIT_VALLEY 8 10 12 A 6
ZCD current IZCD -0.15 0.1 0.35 A AAM 6
LS reverse current limit ILIMIT_REVERSE 2 4.5 6.5 A FCCM 6
Switch leakage current ISW_LKG 0.01 1 uA 7
HS switch on resistance RON_HS 48 80 mΩ VBST - VSW = 5V 7
LS switch on resistance RON_LS 20 40 mΩ VCC = 5V 7
Soft-start current ISS 4 6 8 uA VSS = 0V 7
EN rising threshold VEN_RISING 0.8 1 1.2 V 7
EN falling threshold VEN_FALLING 0.65 0.85 1.05 V 7
PG rising threshold (VFB/VREF), VFB rising PGRISING 88.5 93 97.5 % VFB rising 7
PG rising threshold (VFB/VREF), VFB falling PGRISING 101.5 106 110.5 % VFB falling 7
PG falling threshold (VFB/VREF), VFB falling PGFALLING 86.5 91 95.5 % VFB falling 7
PG falling threshold (VFB/VREF), VFB rising PGFALLING 103 107.5 112 % VFB rising 7
PG output voltage low VPG_LOW 0.1 0.3 V ISINK = 1mA 7
Supply voltage (VIN) operating range VIN 3.3 45 V 5
Operating junction temperature TJ -40 150 C 5
VIN, EN voltage VIN, EN -0.3 50 V 5
All other pins voltage -0.3 6 V 5
Operating junction temperature (absolute maximum) TJ 150 C 5
Lead temperature 260 C 5
Storage temperature TSTG -65 150 C 5
ESD Human-body model HBM -2 2 kV 5
ESD Charged-device model CDM -750 750 V 5
Thermal resistance junction-to-case θJC 9 C/W JESD51-7, 4-layer PCB 5
Thermal resistance junction-to-case (EVQ board) θJC 2.5 C/W EVQ4436-R-00A, 9cmx9cm, 4-layer PCB 5

CAD (KiCad official)

  • Symbol: MPQ4436GRE-AEC1-Z
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
  • 3D model files: mpq4436gre-aec1-z-etched.step / mpq4436gre-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq4436gre-aec1-z.step / mpq4436gre-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (38 pp, sha256 36922d91e6ea95ba, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF