main
Ray
Publish 0.1.0
3f22524
MPQ4420AGJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MPQ4420AGJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Power good open-drain output that goes high if the output voltage exceeds 90% of the nominal voltage. |
| 2 | IN | power_in | Supply voltage input operating from a 4V to 36V rail, requiring decoupling capacitor C1 and a wide PCB trace. |
| 3 | SW | output | Switch output node, to be connected using a wide PCB trace. |
| 4 | GND | power_in | System ground and reference ground of the regulated output voltage, connected with copper traces and vias. |
| 5 | BST | passive | Bootstrap pin where a capacitor to SW forms the floating high-side driver supply, with a 20Ω resistor between SW and BST strongly recommended. |
| 6 | EN/SYNC | input | Enable/synchronize input: drive high to enable, or apply an external clock (200kHz to 2.2MHz) to change the switching frequency. |
| 7 | VCC | power_out | Internal bias supply to be decoupled with a 0.1μF-to-0.22μF capacitor not exceeding 0.22μF. |
| 8 | FB | input | Feedback input connected to the tap of a resistor divider from the output to GND, with frequency foldback when FB is below 660mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute max) | VIN | -0.3 | 40 | V | 3 | ||
| Switch voltage (absolute max) | VSW | -0.3 | 41 | V | 3 | ||
| All other pins | -0.3 | 6 | V | 3 | |||
| Continuous power dissipation | PD | 1.25 | W | TA = +25°C, TSOT23-8 | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Continuous supply voltage | VIN | 4 | 36 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Thermal resistance junction-ambient | θJA | 100 | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 | ||
| Thermal resistance junction-case | θJC | 55 | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 | ||
| Supply current (shutdown) | ISHDN | 8 | μA | VEN = 0V | 4 | ||
| Supply current (quiescent) | IQ | 0.6 | 0.8 | mA | VEN = 2V, VFB = 1V, no switching | 4 | |
| HS switch on resistance | RON_HS | 90 | 155 | mΩ | VBST-SW = 5V | 4 | |
| LS switch on resistance | RON_LS | 55 | 105 | mΩ | VCC = 5V | 4 | |
| Switch leakage | ILKG | 1 | μA | VEN = 0V, VSW = 12V | 4 | ||
| Current limit | ILIMIT | 3.4 | 5.6 | 7.8 | A | Under 40% duty cycle | 4 |
| Oscillator frequency | fSW | 320 | 410 | 500 | kHz | VFB = 750mV | 4 |
| Foldback frequency | fFB | 70 | 100 | 130 | kHz | VFB < 400mV | 4 |
| Maximum duty cycle | DMAX | 92 | 95 | % | VFB = 750mV, 410kHz | 4 | |
| Minimum on time | tON_MIN | 70 | ns | Derived from bench characterization | 4 | ||
| Sync frequency range | fSYNC | 0.2 | 2.4 | MHz | 4 | ||
| Feedback voltage | VFB | 780 | 792 | 804 | mV | TJ = 25°C | 4 |
| Feedback voltage (over temperature) | VFB | 776 | 808 | mV | 4 | ||
| Feedback current | IFB | 10 | 100 | nA | VFB = 820mV | 4 | |
| EN rising threshold | VEN RISING | 1.15 | 1.4 | 1.65 | V | 4 | |
| EN falling threshold | VEN_FALLING | 1.05 | 1.25 | 1.45 | V | 4 | |
| EN threshold hysteresis | VEN_HYS | 150 | mV | 4 | |||
| EN input current | IEN | 4 | 6 | μA | VEN = 2V | 4 | |
| EN input current | IEN | 0 | 0.2 | μA | VEN = 0 | 4 | |
| VIN UVLO threshold rising | INUVRISING | 3.3 | 3.5 | 3.7 | V | 4 | |
| VIN UVLO threshold falling | INUVFALLING | 3.1 | 3.3 | 3.5 | V | 4 | |
| VIN UVLO hysteresis | INUVHYS | 200 | mV | 4 | |||
| VCC regulator | VCC | 4.6 | 4.9 | 5.2 | V | ICC = 0mA | 4 |
| VCC load regulation | 1.5 | 4 | % | ICC = 5mA | 4 | ||
| Soft-start period | tSS | 0.55 | 1.45 | 2.45 | ms | VOUT from 10% to 90% | 4 |
| Thermal shutdown | 150 | 170 | °C | Derived from bench characterization | 4 | ||
| Thermal hysteresis | 30 | °C | Derived from bench characterization | 4 | |||
| PG rising threshold | PGVth_RISING | 86 | 90 | 94 | % | as a percentage of VFB | 4 |
| PG falling threshold | PGVth FALLING | 80 | 84 | 88 | % | as a percentage of VFB | 4 |
| PG threshold hysteresis | PGVth_HYS | 6 | % | as a percentage of VFB | 5 | ||
| PG rising delay | PGTd_RISING | 40 | 90 | 160 | μs | 5 | |
| PG falling delay | PGTd_FALLING | 30 | 55 | 95 | μs | 5 | |
| PG sink current capability | VPG | 0.1 | 0.3 | V | Sink 4mA | 5 | |
| PG leakage current | ILKG_PG | 10 | 100 | nA | 5 |
CAD (KiCad official)
- Symbol:
MPQ4420AGJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mpq4420agj-z-etched.step/mpq4420agj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq4420agj-z.step/mpq4420agj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (20 pp, sha256
0f6fe8d1f2a8b86f, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MPQ4420AGJ-Z
**Monolithic Power Systems** · DC-DC Converters · TSOT-23-8
MPQ4420AGJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Power good open-drain output that goes high if the output voltage exceeds 90% of the nominal voltage. |
| 2 | IN | power_in | Supply voltage input operating from a 4V to 36V rail, requiring decoupling capacitor C1 and a wide PCB trace. |
| 3 | SW | output | Switch output node, to be connected using a wide PCB trace. |
| 4 | GND | power_in | System ground and reference ground of the regulated output voltage, connected with copper traces and vias. |
| 5 | BST | passive | Bootstrap pin where a capacitor to SW forms the floating high-side driver supply, with a 20Ω resistor between SW and BST strongly recommended. |
| 6 | EN/SYNC | input | Enable/synchronize input: drive high to enable, or apply an external clock (200kHz to 2.2MHz) to change the switching frequency. |
| 7 | VCC | power_out | Internal bias supply to be decoupled with a 0.1μF-to-0.22μF capacitor not exceeding 0.22μF. |
| 8 | FB | input | Feedback input connected to the tap of a resistor divider from the output to GND, with frequency foldback when FB is below 660mV. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute max) | VIN | -0.3 | | 40 | V | | 3 |
| Switch voltage (absolute max) | VSW | -0.3 | | 41 | V | | 3 |
| All other pins | | -0.3 | | 6 | V | | 3 |
| Continuous power dissipation | PD | | | 1.25 | W | TA = +25°C, TSOT23-8 | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Continuous supply voltage | VIN | 4 | | 36 | V | | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 3 |
| Thermal resistance junction-ambient | θJA | | 100 | | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 |
| Thermal resistance junction-case | θJC | | 55 | | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 |
| Supply current (shutdown) | ISHDN | | | 8 | μA | VEN = 0V | 4 |
| Supply current (quiescent) | IQ | | 0.6 | 0.8 | mA | VEN = 2V, VFB = 1V, no switching | 4 |
| HS switch on resistance | RON_HS | | 90 | 155 | mΩ | VBST-SW = 5V | 4 |
| LS switch on resistance | RON_LS | | 55 | 105 | mΩ | VCC = 5V | 4 |
| Switch leakage | ILKG | | | 1 | μA | VEN = 0V, VSW = 12V | 4 |
| Current limit | ILIMIT | 3.4 | 5.6 | 7.8 | A | Under 40% duty cycle | 4 |
| Oscillator frequency | fSW | 320 | 410 | 500 | kHz | VFB = 750mV | 4 |
| Foldback frequency | fFB | 70 | 100 | 130 | kHz | VFB < 400mV | 4 |
| Maximum duty cycle | DMAX | 92 | 95 | | % | VFB = 750mV, 410kHz | 4 |
| Minimum on time | tON_MIN | | 70 | | ns | Derived from bench characterization | 4 |
| Sync frequency range | fSYNC | 0.2 | | 2.4 | MHz | | 4 |
| Feedback voltage | VFB | 780 | 792 | 804 | mV | TJ = 25°C | 4 |
| Feedback voltage (over temperature) | VFB | 776 | | 808 | mV | | 4 |
| Feedback current | IFB | | 10 | 100 | nA | VFB = 820mV | 4 |
| EN rising threshold | VEN RISING | 1.15 | 1.4 | 1.65 | V | | 4 |
| EN falling threshold | VEN_FALLING | 1.05 | 1.25 | 1.45 | V | | 4 |
| EN threshold hysteresis | VEN_HYS | | 150 | | mV | | 4 |
| EN input current | IEN | | 4 | 6 | μA | VEN = 2V | 4 |
| EN input current | IEN | | 0 | 0.2 | μA | VEN = 0 | 4 |
| VIN UVLO threshold rising | INUVRISING | 3.3 | 3.5 | 3.7 | V | | 4 |
| VIN UVLO threshold falling | INUVFALLING | 3.1 | 3.3 | 3.5 | V | | 4 |
| VIN UVLO hysteresis | INUVHYS | | 200 | | mV | | 4 |
| VCC regulator | VCC | 4.6 | 4.9 | 5.2 | V | ICC = 0mA | 4 |
| VCC load regulation | | | 1.5 | 4 | % | ICC = 5mA | 4 |
| Soft-start period | tSS | 0.55 | 1.45 | 2.45 | ms | VOUT from 10% to 90% | 4 |
| Thermal shutdown | | 150 | 170 | | °C | Derived from bench characterization | 4 |
| Thermal hysteresis | | | 30 | | °C | Derived from bench characterization | 4 |
| PG rising threshold | PGVth_RISING | 86 | 90 | 94 | % | as a percentage of VFB | 4 |
| PG falling threshold | PGVth FALLING | 80 | 84 | 88 | % | as a percentage of VFB | 4 |
| PG threshold hysteresis | PGVth_HYS | | 6 | | % | as a percentage of VFB | 5 |
| PG rising delay | PGTd_RISING | 40 | 90 | 160 | μs | | 5 |
| PG falling delay | PGTd_FALLING | 30 | 55 | 95 | μs | | 5 |
| PG sink current capability | VPG | | 0.1 | 0.3 | V | Sink 4mA | 5 |
| PG leakage current | ILKG_PG | | 10 | 100 | nA | | 5 |
## CAD (KiCad official)
- Symbol: `MPQ4420AGJ-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `mpq4420agj-z-etched.step` / `mpq4420agj-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpq4420agj-z.step` / `mpq4420agj-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mpq4420agj-z-datasheet.pdf) (20 pp, sha256 `0f6fe8d1f2a8b86f`, retrieved 2026-10-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mpq4420agj-z-datasheet.pdf)