main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mpq4420agj-z: viewers · Ray
mpq4420agj-z-etched.glb Publish 0.1.0 · Ray
mpq4420agj-z-etched.step mpq4420agj-z: factory component page (tier=lcsc) · Ray
mpq4420agj-z-hero.glb mpq4420agj-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mpq4420agj-z-hero.overlay.json Publish 0.1.0 · Ray
mpq4420agj-z.glb Publish 0.1.0 · Ray
mpq4420agj-z.kicad_mod Publish 0.1.0 · Ray
mpq4420agj-z.kicad_sym Publish 0.1.0 · Ray
mpq4420agj-z.lbr Publish 0.1.0 · Ray
mpq4420agj-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MPQ4420AGJ-Z

Monolithic Power Systems · DC-DC Converters · TSOT-23-8

MPQ4420AGJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG output Power good open-drain output that goes high if the output voltage exceeds 90% of the nominal voltage.
2 IN power_in Supply voltage input operating from a 4V to 36V rail, requiring decoupling capacitor C1 and a wide PCB trace.
3 SW output Switch output node, to be connected using a wide PCB trace.
4 GND power_in System ground and reference ground of the regulated output voltage, connected with copper traces and vias.
5 BST passive Bootstrap pin where a capacitor to SW forms the floating high-side driver supply, with a 20Ω resistor between SW and BST strongly recommended.
6 EN/SYNC input Enable/synchronize input: drive high to enable, or apply an external clock (200kHz to 2.2MHz) to change the switching frequency.
7 VCC power_out Internal bias supply to be decoupled with a 0.1μF-to-0.22μF capacitor not exceeding 0.22μF.
8 FB input Feedback input connected to the tap of a resistor divider from the output to GND, with frequency foldback when FB is below 660mV.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (absolute max) VIN -0.3 40 V 3
Switch voltage (absolute max) VSW -0.3 41 V 3
All other pins -0.3 6 V 3
Continuous power dissipation PD 1.25 W TA = +25°C, TSOT23-8 3
Junction temperature TJ 150 °C 3
Storage temperature -65 150 °C 3
Continuous supply voltage VIN 4 36 V 3
Operating junction temperature TJ -40 125 °C 3
Thermal resistance junction-ambient θJA 100 °C/W TSOT23-8, JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 55 °C/W TSOT23-8, JESD51-7 4-layer PCB 3
Supply current (shutdown) ISHDN 8 μA VEN = 0V 4
Supply current (quiescent) IQ 0.6 0.8 mA VEN = 2V, VFB = 1V, no switching 4
HS switch on resistance RON_HS 90 155 mΩ VBST-SW = 5V 4
LS switch on resistance RON_LS 55 105 mΩ VCC = 5V 4
Switch leakage ILKG 1 μA VEN = 0V, VSW = 12V 4
Current limit ILIMIT 3.4 5.6 7.8 A Under 40% duty cycle 4
Oscillator frequency fSW 320 410 500 kHz VFB = 750mV 4
Foldback frequency fFB 70 100 130 kHz VFB < 400mV 4
Maximum duty cycle DMAX 92 95 % VFB = 750mV, 410kHz 4
Minimum on time tON_MIN 70 ns Derived from bench characterization 4
Sync frequency range fSYNC 0.2 2.4 MHz 4
Feedback voltage VFB 780 792 804 mV TJ = 25°C 4
Feedback voltage (over temperature) VFB 776 808 mV 4
Feedback current IFB 10 100 nA VFB = 820mV 4
EN rising threshold VEN RISING 1.15 1.4 1.65 V 4
EN falling threshold VEN_FALLING 1.05 1.25 1.45 V 4
EN threshold hysteresis VEN_HYS 150 mV 4
EN input current IEN 4 6 μA VEN = 2V 4
EN input current IEN 0 0.2 μA VEN = 0 4
VIN UVLO threshold rising INUVRISING 3.3 3.5 3.7 V 4
VIN UVLO threshold falling INUVFALLING 3.1 3.3 3.5 V 4
VIN UVLO hysteresis INUVHYS 200 mV 4
VCC regulator VCC 4.6 4.9 5.2 V ICC = 0mA 4
VCC load regulation 1.5 4 % ICC = 5mA 4
Soft-start period tSS 0.55 1.45 2.45 ms VOUT from 10% to 90% 4
Thermal shutdown 150 170 °C Derived from bench characterization 4
Thermal hysteresis 30 °C Derived from bench characterization 4
PG rising threshold PGVth_RISING 86 90 94 % as a percentage of VFB 4
PG falling threshold PGVth FALLING 80 84 88 % as a percentage of VFB 4
PG threshold hysteresis PGVth_HYS 6 % as a percentage of VFB 5
PG rising delay PGTd_RISING 40 90 160 μs 5
PG falling delay PGTd_FALLING 30 55 95 μs 5
PG sink current capability VPG 0.1 0.3 V Sink 4mA 5
PG leakage current ILKG_PG 10 100 nA 5

CAD (KiCad official)

  • Symbol: MPQ4420AGJ-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mpq4420agj-z-etched.step / mpq4420agj-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq4420agj-z.step / mpq4420agj-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (20 pp, sha256 0f6fe8d1f2a8b86f, retrieved 2026-10-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF