main
Ray Publish 0.1.0 78e0763

MPQ3414BGJ-5-AEC1-Z

Monolithic Power Systems · DC-DC Converters · TSOT-23-8

MPQ3414BGJ-5-AEC1-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input that provides start-up bias and should be bypassed locally; once VOUT exceeds VIN the bias is derived from the OUT pin.
2 OUT power_out Synchronous rectifier output (drain of the internal synchronous rectifier) and voltage-regulation sense point; connect to the output capacitors with short, wide traces.
3 SW passive Power switch output, the node of the internal low-side MOSFET and synchronous MOSFET; connect the inductor between SW and VIN and keep the trace short and wide.
4 PGND power_in Power ground.
5 FTY passive Factory use only; float the FTY pin or connect it to ground (AGND or PGND).
6 AGND power_in Analog ground.
7 MODE input Mode selection: pull high for advanced asynchronous modulation (AAM), pull low for forced continuous conduction mode (FCCM); do not adjust during operation.
8 EN input Enable control: pull above 1.2V to turn the converter on and below 0.4V to turn it off.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply current (measured on OUT) IQ_OUT 52 80 µA VMODE = VEN = VIN = 3.3V, VOUT = 6V, no load, measured on OUT, TJ = 25°C 4
Quiescent current (measured on VIN) IQ_IN 8 14 µA VMODE = VEN = VIN = 3.3V, VOUT = 6V, TJ = 25°C, no load, measured on VIN 4
Shutdown current ISD 0.1 1 µA VEN = VOUT = 0V, TJ = 25°C, measured on VIN 4
VIN under-voltage lockout threshold VIN_UVLO 1.65 1.7 V VIN rising, TJ = 25°C 4
VIN UVLO hysteresis 100 mV 4
Switching frequency fSW 1.9 2.2 2.5 MHz 4
Reference voltage (25°C) VREF 4.9 5 5.1 V TJ = 25°C 4
Reference voltage (full temp) VREF 4.875 5 5.125 V TJ = -40°C to 125°C 4
LS-FET leakage current ILKG_LS 0.1 1 µA VSW = 6.5V, TJ = 25°C 4
HS-FET leakage current ILKG_PMOS 0.1 1 µA VSW = 6.5V, VOUT = 0V, TJ = 25°C 4
Start-up current limit (VO = 0V) ILIMIT_SU 0.1 0.3 0.4 A VIN = 4V, Vo = 0V 4
Start-up current limit (VOUT 3.3V) ILIMIT_SU 0.4 0.8 1 A VIN = 4V, VOUT is set to 3.6V, pull VOUT to 3.3V 4
LS-FET current limit ILIMIT_LS 2.5 3.6 4.5 A 40% duty cycle 4
Thermal shutdown TSD 150 160 175 °C Guaranteed by characterization 4
Enable high voltage VEN_HIGH 1.2 V 4
EN low voltage VEN_LOW 0.4 V 4
Low-side MOSFET on resistance RDS(ON)_LS 70 mΩ 4
High-side MOSFET on resistance RDS(ON)_HS 80 mΩ 4
Maximum duty cycle DMAX 85 % VIN = 3.3V 4
EN current IEN 10 nA Connected to VIN 4
Thermal shutdown hysteresis 25 °C 4
Enable voltage VEN 0 4 V 3
Operating junction temperature TJ -40 125 °C 3
VSW, VOUT VSW, VOUT -0.3 6.5 V 3
VSW transient VSW -0.3 9 V <5ns 3
All other pins -0.3 6.5 V 3
Junction temperature TJ 150 °C 3
Storage temperature -65 150 °C 3
ESD HBM -2 2 kV Human body model 3
ESD CDM -750 750 V Charged device model 3
Junction-to-ambient thermal resistance θJA 100 °C/W TSOT23-8, JESD51-7 4-layer PCB 3

CAD (KiCad official)

  • Symbol: MPQ3414BGJ-5-AEC1-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mpq3414bgj-5-aec1-z-etched.step / mpq3414bgj-5-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq3414bgj-5-aec1-z.step / mpq3414bgj-5-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (19 pp, sha256 01949c74f10f0a88, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF