Generated by kicad-footprint-generator · KiCad file format 20260206
MPQ3414BGJ-5-AEC1-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MPQ3414BGJ-5-AEC1-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input that provides start-up bias and should be bypassed locally; once VOUT exceeds VIN the bias is derived from the OUT pin. |
| 2 | OUT | power_out | Synchronous rectifier output (drain of the internal synchronous rectifier) and voltage-regulation sense point; connect to the output capacitors with short, wide traces. |
| 3 | SW | passive | Power switch output, the node of the internal low-side MOSFET and synchronous MOSFET; connect the inductor between SW and VIN and keep the trace short and wide. |
| 4 | PGND | power_in | Power ground. |
| 5 | FTY | passive | Factory use only; float the FTY pin or connect it to ground (AGND or PGND). |
| 6 | AGND | power_in | Analog ground. |
| 7 | MODE | input | Mode selection: pull high for advanced asynchronous modulation (AAM), pull low for forced continuous conduction mode (FCCM); do not adjust during operation. |
| 8 | EN | input | Enable control: pull above 1.2V to turn the converter on and below 0.4V to turn it off. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current (measured on OUT) | IQ_OUT | 52 | 80 | µA | VMODE = VEN = VIN = 3.3V, VOUT = 6V, no load, measured on OUT, TJ = 25°C | 4 | |
| Quiescent current (measured on VIN) | IQ_IN | 8 | 14 | µA | VMODE = VEN = VIN = 3.3V, VOUT = 6V, TJ = 25°C, no load, measured on VIN | 4 | |
| Shutdown current | ISD | 0.1 | 1 | µA | VEN = VOUT = 0V, TJ = 25°C, measured on VIN | 4 | |
| VIN under-voltage lockout threshold | VIN_UVLO | 1.65 | 1.7 | V | VIN rising, TJ = 25°C | 4 | |
| VIN UVLO hysteresis | 100 | mV | 4 | ||||
| Switching frequency | fSW | 1.9 | 2.2 | 2.5 | MHz | 4 | |
| Reference voltage (25°C) | VREF | 4.9 | 5 | 5.1 | V | TJ = 25°C | 4 |
| Reference voltage (full temp) | VREF | 4.875 | 5 | 5.125 | V | TJ = -40°C to 125°C | 4 |
| LS-FET leakage current | ILKG_LS | 0.1 | 1 | µA | VSW = 6.5V, TJ = 25°C | 4 | |
| HS-FET leakage current | ILKG_PMOS | 0.1 | 1 | µA | VSW = 6.5V, VOUT = 0V, TJ = 25°C | 4 | |
| Start-up current limit (VO = 0V) | ILIMIT_SU | 0.1 | 0.3 | 0.4 | A | VIN = 4V, Vo = 0V | 4 |
| Start-up current limit (VOUT 3.3V) | ILIMIT_SU | 0.4 | 0.8 | 1 | A | VIN = 4V, VOUT is set to 3.6V, pull VOUT to 3.3V | 4 |
| LS-FET current limit | ILIMIT_LS | 2.5 | 3.6 | 4.5 | A | 40% duty cycle | 4 |
| Thermal shutdown | TSD | 150 | 160 | 175 | °C | Guaranteed by characterization | 4 |
| Enable high voltage | VEN_HIGH | 1.2 | V | 4 | |||
| EN low voltage | VEN_LOW | 0.4 | V | 4 | |||
| Low-side MOSFET on resistance | RDS(ON)_LS | 70 | mΩ | 4 | |||
| High-side MOSFET on resistance | RDS(ON)_HS | 80 | mΩ | 4 | |||
| Maximum duty cycle | DMAX | 85 | % | VIN = 3.3V | 4 | ||
| EN current | IEN | 10 | nA | Connected to VIN | 4 | ||
| Thermal shutdown hysteresis | 25 | °C | 4 | ||||
| Enable voltage | VEN | 0 | 4 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| VSW, VOUT | VSW, VOUT | -0.3 | 6.5 | V | 3 | ||
| VSW transient | VSW | -0.3 | 9 | V | <5ns | 3 | |
| All other pins | -0.3 | 6.5 | V | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| ESD HBM | -2 | 2 | kV | Human body model | 3 | ||
| ESD CDM | -750 | 750 | V | Charged device model | 3 | ||
| Junction-to-ambient thermal resistance | θJA | 100 | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 |
CAD (KiCad official)
- Symbol:
MPQ3414BGJ-5-AEC1-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mpq3414bgj-5-aec1-z-etched.step/mpq3414bgj-5-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq3414bgj-5-aec1-z.step/mpq3414bgj-5-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (19 pp, sha256
01949c74f10f0a88, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).