main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mpq3362gj-aec1-z: viewers · Ray
mpq3362gj-aec1-z-etched.glb Publish 0.1.0 · Ray
mpq3362gj-aec1-z-etched.step mpq3362gj-aec1-z: factory component page (tier=lcsc) · Ray
mpq3362gj-aec1-z-hero.glb mpq3362gj-aec1-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mpq3362gj-aec1-z-hero.overlay.json Publish 0.1.0 · Ray
mpq3362gj-aec1-z.glb Publish 0.1.0 · Ray
mpq3362gj-aec1-z.kicad_mod Publish 0.1.0 · Ray
mpq3362gj-aec1-z.kicad_sym Publish 0.1.0 · Ray
mpq3362gj-aec1-z.lbr Publish 0.1.0 · Ray
mpq3362gj-aec1-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MPQ3362GJ-AEC1-Z

Monolithic Power Systems · LED Drivers · TSOT-23-8

MPQ3362GJ-AEC1-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Output switch node, the drain of the internal N-channel MOSFET (40V rated), connected to the inductor and rectifier to complete the boost converter.
2 VIN power_in Input supply pin, 3V to 36V operating range, connectable to the input supply or to the output for bootstrapped operation.
3 COMP passive Error amplifier output compensation pin, connected to a series RC network to compensate the regulator control loop.
4 EN/DIM input Enable and dimming pin: low for 20ms disables the IC, PWM below 2kHz gives PWM dimming, and PWM above 5kHz gives analog dimming.
5 OSC/SYNC bidirectional Switching frequency setting and synchronization pin: a resistor sets fSW between 200kHz and 2.2MHz, or a 200kHz to 2.2MHz pulse signal synchronizes it.
6 FB input Regulation feedback input with a 0.2V regulation threshold.
7 OVP input Open LED protection pin that senses the output voltage through a divider, with a 1.18V typical threshold, to protect the IC during open LED operation.
8 GND power_in Ground.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
IN shutdown supply current 0.3 1.5 μA VEN ≤ 0V 4
IN operating supply current IQ1 1 1.25 mA VEN > 2V, VFB = 0.5V 4
IN operating supply current (switching) IQ2 2.5 mA With switching, 400kHz 4
IN under-voltage lockout threshold VUVLO 2.35 2.5 2.65 V VIN rising 4
IN under-voltage lockout hysteresis VUVLO_HYS 100 mV 4
EN/DIM input low voltage VEN_L 0.4 V 4
EN/DIM input high voltage VEN_H 1.3 V 4
EN/DIM input bias current IEN 7 μA VEN = 5V 4
EN power off time tEN 16 20 24 ms EN/DIM pulls low to disable the IC 4
SW switching frequency fSW 360 400 440 kHz ROSC = 100kΩ 4
SW switching frequency fSW 1650 1850 2050 kHz ROSC = 20kΩ 4
SW maximum duty cycle 90 93 % VFB = 0.15V, fSW = 400kHz 4
Error amplifier transconductance GEA 250 μA/V 4
COMP maximum output current IEA 30 μA Source and sink 4
FB regulation threshold VFB 196 200 204 mV 100% analog dimming (25°C) 4
FB regulation threshold VFB 195 200 205 mV 100% analog dimming (-40°C to +125°C) 4
FB input biased current IFB 2.5 μA VFB = 0.5V 4
SW on resistance RON 80 mΩ VIN = 4V 4
SW current limit ILIM 3.4 4 4.6 A Duty = 80% 4
SW leakage current ISW 1.5 μA VSW = 36V 4
OVP threshold VOVP 1.1 1.18 1.26 V 4
OVP hysteresis VOVP_HYS 100 mV 4
OVP under-voltage threshold VOVP_UV 50 100 mV 4
Short load protection VSP 540 600 660 mV VFB > VSP, short load protection is triggered 4
Latch-off current limit ICL 6.5 A 4
Thermal shutdown TSD 170 °C Not tested in production. Guaranteed by characterization 4
Thermal shutdown hysteresis TSD_HYS 20 °C 4
VIN, VSW absolute maximum VIN, VSW -0.3 40 V 3
All other pins absolute maximum -0.3 5.3 V 3
Continuous power dissipation PD 1.25 W TA = 25°C, TSOT23-8 3
Junction temperature TJ 150 °C 3
Storage temperature -65 150 °C 3
ESD HBM -2000 2000 V Human body model 3
ESD CDM -1000 1000 V Charged device model 3
Supply voltage VIN 3 36 V 3
Maximum LED load voltage VLED 36 V 3
Operating junction temperature TJ -40 125 °C 3
Thermal resistance junction-to-ambient θJA 100 °C/W TSOT23-8, JESD51-7 4-layer PCB 3

CAD (KiCad official)

  • Symbol: MPQ3362GJ-AEC1-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mpq3362gj-aec1-z-etched.step / mpq3362gj-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq3362gj-aec1-z.step / mpq3362gj-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (17 pp, sha256 b03c77020b766c90, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF