main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp6522gu-z: viewers · Ray
mp6522gu-z-etched.glb Publish 0.1.0 · Ray
mp6522gu-z-etched.step mp6522gu-z: factory component page (tier=lcsc) · Ray
mp6522gu-z-hero.glb mp6522gu-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp6522gu-z-hero.overlay.json Publish 0.1.0 · Ray
mp6522gu-z.glb Publish 0.1.0 · Ray
mp6522gu-z.kicad_mod Publish 0.1.0 · Ray
mp6522gu-z.kicad_sym Publish 0.1.0 · Ray
mp6522gu-z.lbr Publish 0.1.0 · Ray
mp6522gu-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MP6522GU-Z

Monolithic Power Systems · Brushed DC Motor Drivers · QFN-24(5x5)

MP6522GU-Z from Monolithic Power Systems, in a QFN-24(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 input Control input for H-bridge (with IN2 sets OUT1/OUT2 state); has an internal pull-down resistor.
2 GND power_in System ground connection.
3 GND power_in System ground connection.
4 nSLEEP input Sleep mode input; set to logic low to enter low-power sleep mode, with an internal pull-down resistor.
5 NC unconnected No connection.
6 OUT1 output Output terminal 1 of the H-bridge.
7 OUT1 output Output terminal 1 of the H-bridge.
8 ISET passive Current programming resistor connected from ISET to ground to set the current limit and VISEN output voltage.
9 VIN power_in Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF.
10 VIN power_in Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF.
11 VIN power_in Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF.
12 OUT2 output Output terminal 2 of the H-bridge.
13 OUT2 output Output terminal 2 of the H-bridge.
14 CPA passive Charge pump flying capacitor pin; connect a 100nF ceramic capacitor between CPA and CPB.
15 CPB passive Charge pump flying capacitor pin; connect a 100nF ceramic capacitor between CPA and CPB.
16 GND power_in System ground connection.
17 GND power_in System ground connection.
18 VCP passive Charge pump output; connect a 100nF capacitor from VCP to VIN.
19 VISEN output Current sense output voltage proportional to load current; keep load current below 2mA with no more than 500pF capacitance.
20 NC unconnected No connection.
21 NC unconnected No connection.
22 NC unconnected No connection.
23 nFAULT output Open-drain fault indication output, logic low in a fault condition (OCP, OTP, OVP); requires an external pull-up resistor.
24 IN2 input Control input for H-bridge (with IN1 sets OUT1/OUT2 state); has an internal pull-down resistor.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-24(5x5)
Category Motor Driver ICs
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VIN 5.4 24 35 V 4
Quiescent current IQ 1.5 2 mA VIN = 24V, nSLEEP = 1, no load current 4
Sleep current ISLEEP 1 µA VIN = 24V, nSLEEP = 0 4
High-side on resistance RHS 0.3 0.45 Ω VIN = 24V, IOUT = 1A, TJ = 25°C 4
Low-side on resistance RLS 0.3 0.45 Ω VIN = 24V, IOUT = 1A, TJ = 25°C 4
Input logic low threshold VIL 0.8 V 4
Input logic high threshold VIH 2 V 4
Logic input current high IIN(H) -12 12 µA VIH = 5V 4
Logic input current low IIN(L) -2 2 µA VIL = 0.8V 4
nFault output low voltage VOL 0.5 V IO = 5mA 4
nFault output high leakage current IOH 1 µA VO = 3.3V 4
UVLO rising threshold VIN_RISE 5.1 5.3 V 4
Input OVP threshold VOVP 36 38 40 V 4
Over-current trip level (sinking) IOCP1 3.2 4 5.2 A Sinking 4
Over-current trip level (sourcing) IOCP2 3.2 4 5.2 A Sourcing 4
ISET current IISET 90 100 110 µA/A 4
Current trip voltage (rising) VITRIP-R 1.44 1.5 1.56 V At VISEN 4
Current trip voltage (falling) VITRIP-F 1.15 1.2 1.25 V At VISEN 4
VISEN output voltage accuracy ΔVVISEN -5 5 % VISET > 0.5V 4
Supply voltage (abs max) VIN -0.3 40 V 3
OUTx voltage (abs max) VOUT1/2 -0.7 40 V 3
ISET voltage (abs max) ISET -0.3 4.5 V 3
All other pins to GND (abs max) -0.3 6.5 V 3
Continuous power dissipation 3.5 W TA = +25°C 3
Storage temperature -55 150 °C 3
Junction temperature TJ 150 °C 3
Lead temperature (solder) 260 °C 3
ESD rating (HBD) 2 kV 3
Supply voltage (recommended) VIN 5.4 35 V 3
Peak output current IOUT -3.2 3.2 A 3
Load current (VISEN) IVISEN -2 2 mA 3
Operating junction temperature TJ -40 125 °C 3
Thermal resistance junction-ambient θJA 36 °C/W QFN-24 (5mmx5mm), JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 8 °C/W QFN-24 (5mmx5mm), JESD51-7 4-layer PCB 3
Charge pump frequency fCP 660 kHz 4
High-side on resistance RHS 0.35 Ω VIN = 24V, IOUT = 1A, TJ = 85°C 4
Low-side on resistance RLS 0.35 Ω VIN = 24V, IOUT = 1A, TJ = 85°C 4
Body diode forward voltage VF 1.1 V IOUT = 1.5A 4
Internal pull-down resistance RPD 530 kΩ 4
UVLO hysteresis VHYS 310 mV 4
Input OVP hysteresis ΔVOVP 2000 mV 4
Over-current deglitch time tOCPD 500 ns 4
Over-current retry time tOCP 0.9 ms 4
Thermal shutdown TTSD 165 °C 4
Thermal shutdown hysteresis ΔTTSD 30 °C 4
Off time tITRIP 17 µs After ITRIP 4

CAD (KiCad official)

  • Symbol: MP6522GU-Z
  • Footprint: Package_DFN_QFN:QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm
  • 3D model: QFN-24(5x5) (KiCad packages3D, STEP)
  • 3D model files: mp6522gu-z-etched.step / mp6522gu-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp6522gu-z.step / mp6522gu-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (11 pp, sha256 d654b5a5b37419ac, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF