3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP6522GU-Z
Monolithic Power Systems · Brushed DC Motor Drivers · QFN-24(5x5)
MP6522GU-Z from Monolithic Power Systems, in a QFN-24(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Control input for H-bridge (with IN2 sets OUT1/OUT2 state); has an internal pull-down resistor. |
| 2 | GND | power_in | System ground connection. |
| 3 | GND | power_in | System ground connection. |
| 4 | nSLEEP | input | Sleep mode input; set to logic low to enter low-power sleep mode, with an internal pull-down resistor. |
| 5 | NC | unconnected | No connection. |
| 6 | OUT1 | output | Output terminal 1 of the H-bridge. |
| 7 | OUT1 | output | Output terminal 1 of the H-bridge. |
| 8 | ISET | passive | Current programming resistor connected from ISET to ground to set the current limit and VISEN output voltage. |
| 9 | VIN | power_in | Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF. |
| 10 | VIN | power_in | Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF. |
| 11 | VIN | power_in | Input supply voltage (5.4V to 35V); decouple to GND with a ceramic capacitor of at least 100nF. |
| 12 | OUT2 | output | Output terminal 2 of the H-bridge. |
| 13 | OUT2 | output | Output terminal 2 of the H-bridge. |
| 14 | CPA | passive | Charge pump flying capacitor pin; connect a 100nF ceramic capacitor between CPA and CPB. |
| 15 | CPB | passive | Charge pump flying capacitor pin; connect a 100nF ceramic capacitor between CPA and CPB. |
| 16 | GND | power_in | System ground connection. |
| 17 | GND | power_in | System ground connection. |
| 18 | VCP | passive | Charge pump output; connect a 100nF capacitor from VCP to VIN. |
| 19 | VISEN | output | Current sense output voltage proportional to load current; keep load current below 2mA with no more than 500pF capacitance. |
| 20 | NC | unconnected | No connection. |
| 21 | NC | unconnected | No connection. |
| 22 | NC | unconnected | No connection. |
| 23 | nFAULT | output | Open-drain fault indication output, logic low in a fault condition (OCP, OTP, OVP); requires an external pull-up resistor. |
| 24 | IN2 | input | Control input for H-bridge (with IN1 sets OUT1/OUT2 state); has an internal pull-down resistor. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-24(5x5) |
| Category | Motor Driver ICs |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VIN | 5.4 | 24 | 35 | V | 4 | |
| Quiescent current | IQ | 1.5 | 2 | mA | VIN = 24V, nSLEEP = 1, no load current | 4 | |
| Sleep current | ISLEEP | 1 | µA | VIN = 24V, nSLEEP = 0 | 4 | ||
| High-side on resistance | RHS | 0.3 | 0.45 | Ω | VIN = 24V, IOUT = 1A, TJ = 25°C | 4 | |
| Low-side on resistance | RLS | 0.3 | 0.45 | Ω | VIN = 24V, IOUT = 1A, TJ = 25°C | 4 | |
| Input logic low threshold | VIL | 0.8 | V | 4 | |||
| Input logic high threshold | VIH | 2 | V | 4 | |||
| Logic input current high | IIN(H) | -12 | 12 | µA | VIH = 5V | 4 | |
| Logic input current low | IIN(L) | -2 | 2 | µA | VIL = 0.8V | 4 | |
| nFault output low voltage | VOL | 0.5 | V | IO = 5mA | 4 | ||
| nFault output high leakage current | IOH | 1 | µA | VO = 3.3V | 4 | ||
| UVLO rising threshold | VIN_RISE | 5.1 | 5.3 | V | 4 | ||
| Input OVP threshold | VOVP | 36 | 38 | 40 | V | 4 | |
| Over-current trip level (sinking) | IOCP1 | 3.2 | 4 | 5.2 | A | Sinking | 4 |
| Over-current trip level (sourcing) | IOCP2 | 3.2 | 4 | 5.2 | A | Sourcing | 4 |
| ISET current | IISET | 90 | 100 | 110 | µA/A | 4 | |
| Current trip voltage (rising) | VITRIP-R | 1.44 | 1.5 | 1.56 | V | At VISEN | 4 |
| Current trip voltage (falling) | VITRIP-F | 1.15 | 1.2 | 1.25 | V | At VISEN | 4 |
| VISEN output voltage accuracy | ΔVVISEN | -5 | 5 | % | VISET > 0.5V | 4 | |
| Supply voltage (abs max) | VIN | -0.3 | 40 | V | 3 | ||
| OUTx voltage (abs max) | VOUT1/2 | -0.7 | 40 | V | 3 | ||
| ISET voltage (abs max) | ISET | -0.3 | 4.5 | V | 3 | ||
| All other pins to GND (abs max) | -0.3 | 6.5 | V | 3 | |||
| Continuous power dissipation | 3.5 | W | TA = +25°C | 3 | |||
| Storage temperature | -55 | 150 | °C | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature (solder) | 260 | °C | 3 | ||||
| ESD rating (HBD) | 2 | kV | 3 | ||||
| Supply voltage (recommended) | VIN | 5.4 | 35 | V | 3 | ||
| Peak output current | IOUT | -3.2 | 3.2 | A | 3 | ||
| Load current (VISEN) | IVISEN | -2 | 2 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Thermal resistance junction-ambient | θJA | 36 | °C/W | QFN-24 (5mmx5mm), JESD51-7 4-layer PCB | 3 | ||
| Thermal resistance junction-case | θJC | 8 | °C/W | QFN-24 (5mmx5mm), JESD51-7 4-layer PCB | 3 | ||
| Charge pump frequency | fCP | 660 | kHz | 4 | |||
| High-side on resistance | RHS | 0.35 | Ω | VIN = 24V, IOUT = 1A, TJ = 85°C | 4 | ||
| Low-side on resistance | RLS | 0.35 | Ω | VIN = 24V, IOUT = 1A, TJ = 85°C | 4 | ||
| Body diode forward voltage | VF | 1.1 | V | IOUT = 1.5A | 4 | ||
| Internal pull-down resistance | RPD | 530 | kΩ | 4 | |||
| UVLO hysteresis | VHYS | 310 | mV | 4 | |||
| Input OVP hysteresis | ΔVOVP | 2000 | mV | 4 | |||
| Over-current deglitch time | tOCPD | 500 | ns | 4 | |||
| Over-current retry time | tOCP | 0.9 | ms | 4 | |||
| Thermal shutdown | TTSD | 165 | °C | 4 | |||
| Thermal shutdown hysteresis | ΔTTSD | 30 | °C | 4 | |||
| Off time | tITRIP | 17 | µs | After ITRIP | 4 |
CAD (KiCad official)
- Symbol:
MP6522GU-Z - Footprint:
Package_DFN_QFN:QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm - 3D model: QFN-24(5x5) (KiCad packages3D, STEP)
- 3D model files:
mp6522gu-z-etched.step/mp6522gu-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp6522gu-z.step/mp6522gu-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (11 pp, sha256
d654b5a5b37419ac, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).