main
History Download
Ray Publish 0.1.0 4e98e3e

MP4810-G

miracle · Logic Output Optoisolators · DIP-8

MP4810-G from miracle, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 ANODE input LED anode input; recommended LED on-state input current is 7 to 16 mA (absolute maximum IF 10 mA continuous, 5 V reverse voltage).
3 CATHODE input LED cathode input; LED on drives VO low and LED off drives VO high.
4 NC unconnected No internal connection.
5 GND power_in Output-side ground reference (VEE = GND) for the detector and totem-pole output.
6 Vo output Totem-pole Schmitt-trigger output that needs no pull-up resistor, goes low when LED is on and high when LED is off, with peak output current of 50 mA.
7 NC unconnected No internal connection.
8 Vcc power_in Detector supply voltage, operating range 3.0 to 30 V (absolute maximum 35 V).

Key specifications

Parameter Value
Manufacturer miracle
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature TA -40 100 °C 3
Supply Voltage VCC 3 30 V 3
Input Current (ON) IF(ON) 7 16 mA 3
Input Voltage (OFF) VF(OFF) 0 0.8 V 3
Forward Current IF 10 mA 2
Peak Transient Current IF(trans) 1 A Note 1: 50% duty, 1ms P.W 2
Operating Frequency f 100 kHz 2
Reverse Voltage VR 5 V 2
Input Power Dissipation PI 45 mW 2
Supply Voltage VCC 35 V 2
Peak Output Current IO 50 mA 2
Output Power Dissipation PO 125 mW 2
Total Power Dissipation Ptot 210 mW 2
Isolation Voltage Viso 5000 Vrms Note 2 2
Operating Temperature Topr -40 110 °C 2
Storage Temperature Tstg -55 125 °C 2
Soldering Temperature Tsol 260 °C Note 3 2
Forward Voltage VF 1.3 1.7 V IF=10mA 3
Reverse Current IR 10 μA VR=5V 3
Input Threshold Current IFLH 3 5 mA IO= 0mA, VO< 5V 3
Input Threshold Voltage VFHL 0.8 1.3 V IO= 0mA, VO> 5V 3
High Level Supply Current ICCH 1.1 3 mA VF=0V,IO= Open 3
Low Level Supply Current ICCL 1.2 3 mA IF=10mA,IO= Open 3
Low Level Output Voltage VOL 0.09 0.3 V IF= 0mA, IO= 6.5mA 3
High Level Output Current IOSH -165 -25 mA VCC=5.5V, VF=0V; note 1 3
High Level Output Current IOSH -50 mA VCC=20V, VF=0V; note 2 3
Low Level Output Current IOSL 25 200 mA VO=VCC=5.5V, IF=10mA; note 1 3
Low Level Output Current IOSL 50 mA VO=VCC=20V, IF=10mA; note 2 3
Propagation Delay Time to Output Low Level TPHL 100 200 ns IF= 10mA, CL= 15pF, Rg= 5KΩ, f= 100kHz, Duty = 10%, TA= 25℃ 4
Propagation Delay Time to Output High Level TPLH 85 200 ns IF= 10mA, CL= 15pF, Rg= 5KΩ, f= 100kHz, Duty = 10%, TA= 25℃ 4
Pulse Width Distortion PWD 15 250 ns 4
Propagation Delay Skew PDD -100 100 ns 4
Common Mode Transient Immunity at Logic High /CMH/ 10 kV/μs VF=0V,VCC=5V, TA=25℃, VCM= 1KV 4
Common Mode Transient Immunity at Logic Low /CML/ 10 kV/μs IF=10mA,VCC= 5V, TA= 25℃, VCM= 1KV 4

CAD (KiCad official)

  • Symbol: MP4810-G
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: mp4810-g-etched.step / mp4810-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp4810-g.step / mp4810-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: miracle datasheet (18 pp, sha256 3cbd56d64f915c84, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF