3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP4810-G
miracle · Logic Output Optoisolators · DIP-8
MP4810-G from miracle, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | ANODE | input | LED anode input; recommended LED on-state input current is 7 to 16 mA (absolute maximum IF 10 mA continuous, 5 V reverse voltage). |
| 3 | CATHODE | input | LED cathode input; LED on drives VO low and LED off drives VO high. |
| 4 | NC | unconnected | No internal connection. |
| 5 | GND | power_in | Output-side ground reference (VEE = GND) for the detector and totem-pole output. |
| 6 | Vo | output | Totem-pole Schmitt-trigger output that needs no pull-up resistor, goes low when LED is on and high when LED is off, with peak output current of 50 mA. |
| 7 | NC | unconnected | No internal connection. |
| 8 | Vcc | power_in | Detector supply voltage, operating range 3.0 to 30 V (absolute maximum 35 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | miracle |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature | TA | -40 | 100 | °C | 3 | ||
| Supply Voltage | VCC | 3 | 30 | V | 3 | ||
| Input Current (ON) | IF(ON) | 7 | 16 | mA | 3 | ||
| Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 3 | ||
| Forward Current | IF | 10 | mA | 2 | |||
| Peak Transient Current | IF(trans) | 1 | A | Note 1: 50% duty, 1ms P.W | 2 | ||
| Operating Frequency | f | 100 | kHz | 2 | |||
| Reverse Voltage | VR | 5 | V | 2 | |||
| Input Power Dissipation | PI | 45 | mW | 2 | |||
| Supply Voltage | VCC | 35 | V | 2 | |||
| Peak Output Current | IO | 50 | mA | 2 | |||
| Output Power Dissipation | PO | 125 | mW | 2 | |||
| Total Power Dissipation | Ptot | 210 | mW | 2 | |||
| Isolation Voltage | Viso | 5000 | Vrms | Note 2 | 2 | ||
| Operating Temperature | Topr | -40 | 110 | °C | 2 | ||
| Storage Temperature | Tstg | -55 | 125 | °C | 2 | ||
| Soldering Temperature | Tsol | 260 | °C | Note 3 | 2 | ||
| Forward Voltage | VF | 1.3 | 1.7 | V | IF=10mA | 3 | |
| Reverse Current | IR | 10 | μA | VR=5V | 3 | ||
| Input Threshold Current | IFLH | 3 | 5 | mA | IO= 0mA, VO< 5V | 3 | |
| Input Threshold Voltage | VFHL | 0.8 | 1.3 | V | IO= 0mA, VO> 5V | 3 | |
| High Level Supply Current | ICCH | 1.1 | 3 | mA | VF=0V,IO= Open | 3 | |
| Low Level Supply Current | ICCL | 1.2 | 3 | mA | IF=10mA,IO= Open | 3 | |
| Low Level Output Voltage | VOL | 0.09 | 0.3 | V | IF= 0mA, IO= 6.5mA | 3 | |
| High Level Output Current | IOSH | -165 | -25 | mA | VCC=5.5V, VF=0V; note 1 | 3 | |
| High Level Output Current | IOSH | -50 | mA | VCC=20V, VF=0V; note 2 | 3 | ||
| Low Level Output Current | IOSL | 25 | 200 | mA | VO=VCC=5.5V, IF=10mA; note 1 | 3 | |
| Low Level Output Current | IOSL | 50 | mA | VO=VCC=20V, IF=10mA; note 2 | 3 | ||
| Propagation Delay Time to Output Low Level | TPHL | 100 | 200 | ns | IF= 10mA, CL= 15pF, Rg= 5KΩ, f= 100kHz, Duty = 10%, TA= 25℃ | 4 | |
| Propagation Delay Time to Output High Level | TPLH | 85 | 200 | ns | IF= 10mA, CL= 15pF, Rg= 5KΩ, f= 100kHz, Duty = 10%, TA= 25℃ | 4 | |
| Pulse Width Distortion | PWD | 15 | 250 | ns | 4 | ||
| Propagation Delay Skew | PDD | -100 | 100 | ns | 4 | ||
| Common Mode Transient Immunity at Logic High | /CMH/ | 10 | kV/μs | VF=0V,VCC=5V, TA=25℃, VCM= 1KV | 4 | ||
| Common Mode Transient Immunity at Logic Low | /CML/ | 10 | kV/μs | IF=10mA,VCC= 5V, TA= 25℃, VCM= 1KV | 4 |
CAD (KiCad official)
- Symbol:
MP4810-G - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
mp4810-g-etched.step/mp4810-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp4810-g.step/mp4810-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: miracle datasheet (18 pp, sha256
3cbd56d64f915c84, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).