main
History Download
Ray Publish 0.1.0 bff677d

MP4657BGS-Z

Monolithic Power Systems · LED Drivers · SOIC-16

MP4657BGS-Z from Monolithic Power Systems, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SYNC input Synchronization input connected to the flyback secondary winding through a voltage divider; its falling edge synchronizes the gate signal turning off (absolute maximum -6.5V to +6V).
2 OPT output Optocoupler drive output that outputs the compensation signal to control the flyback through an external optocoupler (absolute maximum -0.3V to +5V).
3 VFB input System voltage feedback input connected to VSYS through a voltage divider (VSYS = 1.2V x (RVFBH+RVFBL)/RVFBL), with system OVP triggered when VFB exceeds VREF by 24%.
4 DCOMP passive Compensation pin for the system voltage loop, controlling the external N-channel MOSFET duty when PWM is effective and the flyback stage with a differential gain when PWM is ineffective.
5 ICOMP passive Compensation pin for the LED driver loop that controls the flyback power stage when PWM is effective and holds its voltage when PWM is ineffective.
6 OVP input LED stage over-voltage protection input connected to the LED voltage through a voltage divider, with a threshold of about 2.4V for LED open protection and a latch-off above 3V.
7 LED1 input LED string 1 cathode, rated -0.3V to +80V.
8 LED2 input LED string 2 cathode, rated -0.3V to +80V.
9 GND power_in Ground.
10 LED4 input LED string 4 cathode, rated -0.3V to +80V.
11 LED3 input LED string 3 cathode, rated -0.3V to +80V.
12 ISET/FAULT bidirectional LED current setting pin (resistor to ground sets ILED, pin outputs 1.6V) that is also pulled low when a fault occurs.
13 ADIMP/PWM input Dimming signal input: a pulse above 5kHz gives analog dimming and a pulse below 5kHz gives PWM dimming.
14 VIN/SOURCE power_in Power supply input (4V to 16V recommended, -0.3V to +18V absolute maximum) that is also the reference for the gate signal.
15 VDRV power_in Gate driver supply (up to 53V referred to GND), bypassed to VIN/SOURCE with a ceramic capacitor (1µF recommended).
16 GATE output Gate driver output for the external N-channel MOSFET, referred to VIN/SOURCE and limited below 6V relative to VIN/SOURCE.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-16
Category Nixie Tube Driver/LED Driver
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN supply range 4 16 V VIN = 13V, TJ = 25°C 6
VIN UVLO VUVLO_VIN 3.3 3.6 3.9 V 6
VDRV voltage range VDRV 6.5 48 V Refer to GND 6
VDRV UVLO 5.3 5.8 6.3 V VIN = 5V 6
Reference voltage VREF_VFB 1.182 1.2 1.218 V 7
LED OVP threshold VTH_OVP 2.25 2.4 2.55 V 8
ISET voltage VISET 1.53 1.58 1.63 V 8
LEDx average current ILED -1.5 50 1.5 mA RISET = 320kΩ (trim), 50mA; tolerance in % 8
LEDx average current, 40% dimming ILED -3 19.2 3 mA 40% dimming, 20mA; tolerance in % 8
Current matching 0.3 2 % ILED = 50mA 8
Current matching (40%) 0.6 2.5 % ILED = 20mA (40%) 8
Analog dimming input frequency range 5 100 kHz 6
SYNC input frequency range 20 350 kHz 6
ADIMP/PWM logic high VADIMP_HI 1.5 6 V 6
Quiescent current IQ 0.5 mA PWM = 0, GATE = high, VIN = 5V, no load 6
VIN UVLO hysteresis VHYS_UVLO_VIN 350 mV 6
ADIMP/PWM logic low VADIMP_LO 0.7 V 6
Thermal protection threshold 150 °C Rising edge 8
VIN/SOURCE -0.3 18 V 5
VDRV -0.3 53 V 5
LEDx -0.3 80 V 5
GATE - VIN/SOURCE -0.3 12 V 5
SYNC -6.5 6 V 5
OPT -0.3 5 V 5
Other pins -0.3 6.5 V 5
Junction temperature TJ 150 °C 5
Storage temperature -65 150 °C 5
Operating frequency 20 350 kHz 5
ESD HBM -2000 2000 V Human body model 5
ESD CDM -1500 1500 V Charged device model 5
Supply voltage VIN 4 16 V 5
Operating frequency 20 350 kHz 5
Operating junction temperature TJ -40 125 °C 5
Junction-to-ambient thermal resistance θJA 80 °C/W SOIC-16, JESD51-7 4-layer PCB 5
Junction-to-case thermal resistance θJC 35 °C/W SOIC-16, JESD51-7 4-layer PCB 5

CAD (KiCad official)

  • Symbol: MP4657BGS-Z
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: mp4657bgs-z-etched.step / mp4657bgs-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp4657bgs-z.step / mp4657bgs-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (23 pp, sha256 6718f193e51c96bc, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF