main
History Download
Ray Publish 0.1.0 472ccb2

MP4581GN-Z

Monolithic Power Systems · DC-DC Converters · SOIC-8-EP

MP4581GN-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Power enable: pulling EN high turns the MP4581 on and pulling it low turns it off, and EN cannot be left floating.
2 VCC power_out Internal LDO output that supplies the internal control circuit and must be decoupled with a ≥1μF ceramic capacitor.
3 FREQ input Switching frequency (fSW) setting pin, where an external resistor is connected from FREQ to GND to set the buck fSW.
4 FB input Output voltage (VOUT) feedback input, where a resistor divider from VOUT is connected to the FB pin.
5 BST passive Bootstrap power for the high-side MOSFET gate driver, requiring a 0.1μF capacitor connected between BST and SW.
6 SW output Switch node of the converter, connected to the source of the HS-FET and the drain of the LS-FET.
7 GND power_in Power ground.
8 VIN power_in Power supply input, rated for 8V to 100V per the recommended operating conditions.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8-EP
Category Power Management
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VIN 8 100 V 3
Output voltage VOUT 1 30 V 3
Operating junction temperature TJ -40 125 °C 3
VIN, EN voltage VIN, EN -0.3 105 V 3
SW voltage SW -0.5 105 V 3
SW voltage (<20ns) SW -5 111 V <20ns 3
BST to SW voltage BST-SW -0.3 6 V 3
All other pins voltage -0.3 6 V 3
Continuous power dissipation 3.2 W TA = 25°C 3
Junction temperature 150 °C 3
Lead temperature 260 °C 3
Storage temperature -65 150 °C 3
VCC UVLO threshold rising VCCUVLO-R 3.15 3.35 3.55 V VCC rising 4
VCC regulation voltage 4.5 4.85 5.2 V IVCC = 2mA 4
VCC UVLO threshold hysteresis VCCHYS 150 mV 4
Shutdown current ISD 2 μA VEN = 0V, measured on VIN 4
Quiescent current IQ 15 μA VIN = 12V, VFB = 1.05V, no switching, measured on VIN, TJ = 25°C 4
Micro-power EN start-up threshold 0.9 V 4
Micro-power EN off threshold 0.4 V 4
EN input high threshold VEN_ON 1.15 1.25 1.35 V VEN rising 4
EN hysteresis VEN_H 120 mV VEN rising/falling 4
Minimum off time tMIN_OFF 150 ns VFB = 0V 4
Minimum on time tMIN_ON 45 ns 4
FB reference voltage VREF 0.99 1 1.01 V 8V to 100V, TJ = 25°C 4
FB reference voltage over temperature VREF 0.985 1 1.015 V 8V to 100V, TJ = -40°C to +125°C 4
FB input current IFB 50 nA VFB = 1.05V 4
Soft-start time tSS 4.35 ms 10% to 90% of VREF 4
FB under-voltage threshold VUVP 60 % VREF 4
LS-FET on resistance RON_L 265 mΩ 4
Synchronous HS-FET on resistance RON_H 625 mΩ 4
LS-FET valley current limit IVL_LIMT 0.72 0.8 0.88 A Over full duty cycle, TJ = 25°C 4
LS-FET valley current limit over temperature IVL_LIMT 0.68 0.8 0.92 A Over full duty cycle, TJ = -40°C to +125°C 4
Inductor current zero-current detection threshold -60 0 60 mA 4
Thermal shutdown TSD 150 °C 4
Thermal shutdown hysteresis TSD_HYS 25 °C 4
Thermal resistance junction-to-ambient θJA 38 °C/W EV4581-N-00A (4) 3
Thermal resistance junction-to-case θJC 7.5 °C/W EV4581-N-00A (4) 3
Thermal resistance junction-to-ambient (JESD51-7) θJA 48 °C/W JESD51-7 (5) 3
Thermal resistance junction-to-case (JESD51-7) θJC 10 °C/W JESD51-7 (5) 3

CAD (KiCad official)

  • Symbol: MP4581GN-Z
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: mp4581gn-z-etched.step / mp4581gn-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp4581gn-z.step / mp4581gn-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (19 pp, sha256 80bb0160cf520f7e, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF