main
Ray
Publish 0.1.1
e4d2630
MP4056GS-Z
Monolithic Power Systems · LED Drivers · SOIC-8
MP4056GS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MULT | input | Multiplier input connected to the tap of a resistor divider from the rectified AC line; the half-wave sinusoid sets the internal current-loop reference and is also used for dimmer type and phase detection. |
| 2 | ZCD | input | Zero-current detection input where a negative-going edge triggers MOSFET turn-on; it also sets over-voltage detection (VZCD_OVP 4.90V to 5.70V), selects the strong/weak dimming pull-down current, and provides ZCD short-circuit protection. |
| 3 | VCC | power_in | Supply voltage for the control circuitry and internal MOSFET gate driver, with a bulk capacitor typically 22µF; recommended operating range is 11V to 27V and the absolute maximum is -0.3V to +30V. |
| 4 | DAMP | output | Gate control output for the external damping MOSFET; the DAMP pin voltage is rated -0.3V to +16.5V absolute maximum. |
| 5 | D | passive | Internal low-side main MOSFET drain, connected to the source of the external high-side MOSFET; it is rated up to +30V (drain-to-source -0.7V to +30V) and forms an internal charging path to VCC. |
| 6 | S | input | Internal low-side main MOSFET source; a sense resistor from S to GND sets the current-sense signal and the over-current protection threshold VOCP (2.56V to 2.86V, typical 2.70V). |
| 7 | GND | power_in | Ground; the current return for both the control signal and the power signal. |
| 8 | COMP | passive | Loop compensation pin; connect a compensation network (typically a capacitor to ground) to stabilize the LED driver and accurately control LED current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage VCC | VCC | -0.3 | 30 | V | 4 | ||
| Low-Side MOSFET Drain to Source Voltage | -0.7 | 30 | V | 4 | |||
| Damp Pin Voltage | -0.3 | 16.5 | V | 4 | |||
| Other Analog Inputs and Outputs | -0.3 | 6.5 | V | 4 | |||
| ZCD Pin Current | -5 | 5 | mA | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Supply Voltage VCC | VCC | 11 | 27 | V | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Operating Range | VCC | 11 | 27 | V | After turn on | 5 | |
| VCC Upper Level: Internal Charging Circuit Stops and IC Turns On | VCCH | 9.5 | 10 | 10.5 | V | 5 | |
| VCC Re-charge and IC turns off Level in Fault Condition | VCCEN | 6.55 | 7 | 7.45 | V | Fault condition | 5 |
| VCC Charging Current from D | ID_CHARGE | 13 | 25 | 40 | mA | VD=16V, VCC=5V | 5 |
| Quiescent Current | IQ | 800 | 1300 | µA | No switching, VCC=15V | 5 | |
| Quiescent Current at Fault | IQ_FAULT | 220 | 340 | 620 | µA | Fault condition, IC latch, VCC=15V | 5 |
| Gain K | K | 0.9 | 1.28 | 1.6 | 1/V | VCOMP=2V, VMULT=0.5V | 5 |
| TRIAC Dimming Phase Off Detection Threshold | VMULT_OFF | 0.08 | 0.1 | 0.12 | V | 5 | |
| TRIAC Dimming Phase On Detection Threshold | VMULT_ON | 0.26 | 0.28 | 0.3 | V | 5 | |
| Dimming Pull-Down Turn on Threshold (trailing edge) | VMULT_DP_ON_TL | 0.43 | 0.45 | 0.47 | V | Trailing edge dimmer | 5 |
| Dimming Pull-Down Turn on Threshold (leading edge) | VMULT_DP_ON_LD | 0.22 | 0.25 | 0.28 | V | Leading edge dimmer | 5 |
| Dimming Pull-Down Turn off Threshold (trailing edge) | VMULT_DP_OFF_TL | 0.26 | 0.28 | 0.3 | V | Trailing edge dimmer | 5 |
| Dimming Pull-Down Turn off Threshold (leading edge) | VMULT_DP_OFF_LD | 0.32 | 0.35 | 0.38 | V | Leading edge dimmer | 5 |
| Leading Edge Dimming Detection Low Threshold | VMULT_LD_LOW | 0.08 | 0.1 | 0.12 | V | 5 | |
| Leading Edge Dimming Detection High Threshold | VMULT_LD_HIGH | 0.26 | 0.28 | 0.3 | V | 5 | |
| Trailing Edge Dimming Detection Low Threshold | VMULT_TL_LOW | 0.08 | 0.1 | 0.12 | V | 6 | |
| Reference Voltage | VREF | 0.4 | 0.414 | 0.428 | V | 6 | |
| COMP Lower Clamp Voltage (leading edge dimmer) | VCOMPL_LD | 1.83 | 1.88 | 1.94 | V | Leading edge dimmer | 6 |
| COMP Lower Clamp Voltage (trailing edge dimmer) | VCOMPL_TL | 1.53 | 1.58 | 1.64 | V | Trailing edge dimmer | 6 |
| Max. Source Current | ICOMP+ | 57 | µA | 6 | |||
| Leading-Edge-Blanking Time | tLEB | 350 | 500 | 750 | ns | 7 | |
| Over-Current-Protection Leading-Edge-Blanking Time | tLEB_OCP | 260 | 350 | 550 | ns | 7 | |
| Current Sense Upper Clamp Voltage | VS CLAMP H | 1.97 | 2.07 | 2.17 | V | 7 | |
| Zero-Current-Detect Threshold | VZCD_T | 0.27 | 0.3 | 0.33 | V | Falling Edge | 7 |
| Zero-Current-Detect Hysteresis | VZCD_HYS | 550 | 590 | 625 | mV | 7 | |
| ZCD Pin Short Circuit Threshold | VZCD_SC | 78 | 100 | 122 | mV | 7 | |
| Zero-Current-Detect LEB | tZCD_LEB | 1.9 | 2.3 | 3.36 | µs | Starts at Gate Turn Off when VMULT_O ≥0.25V | 7 |
| Over-Voltage Threshold | VZCD_OVP | 4.9 | 5.3 | 5.7 | V | 7 | |
| OVP Detect LEB | tOVP_LEB | 1.9 | 2.3 | 3.36 | µs | Starts at Gate Turn Off when VMULT_O≥0.25V | 7 |
| Minimum Off Time (Normal) | tOFF_MIN | 4 | 5.3 | 8 | µs | Normal | 7 |
| Weak/Strong DP Mode detector current (leading edge dimmer) | IDP_DET_LD | 140 | 180 | 220 | µA | 7 | |
| Strong DP Mode Enable Threshold (leading edge dimmer) | VEN_DP_STR_LD | 1.13 | 1.18 | 1.23 | V | 7 | |
| Start Timer Period | tSTART | 100 | 130 | 165 | µs | 7 | |
| Continue Drain Current | ID_D-VCC | 10 | 17 | 27 | mA | 8 | |
| Strong Dimming Pull Down Current for leading edge dimmer | IDP_STRONG_LD | 27 | 35 | 43 | mA | 8 | |
| Weak Dimming Pull Down Current for leading edge dimmer | IDP_WEAK_LD | 8 | 10 | 12 | mA | 8 | |
| Pull Down Current for Trailing edge dimmer | IDP_TL | 133 | 150 | 167 | mA | 8 | |
| Low Threshold Voltage (NTC) | VL_NTC | 0.7 | 0.8 | 0.9 | V | 8 | |
| Shutdown Threshold (NTC) | VSD_NTC | 0.32 | 0.38 | 0.44 | V | 8 | |
| Shutdown Voltage Hysteresis (NTC) | VSD_NTC_HSY | 80 | 100 | 120 | mV | 8 | |
| Pull Up Current Source (NTC) | IPULL_UP_NTC | 42 | 52 | 62 | µA | 8 | |
| Turn Off Threshold (DAMP) | VMULT_DAMP_OFF | 0.22 | 0.25 | 0.28 | V | 8 | |
| Turn On Threshold (DAMP) | VMULT_DAMP_ON | 0.32 | 0.35 | 0.38 | V | 8 | |
| Upper Clamp Voltage (DAMP) | VDAMP_CLAMP_UP | 13 | 15 | 16.5 | V | 8 | |
| Source Current (DIM) | IDIM_SOURCE | 2 | 3 | 4 | mA | 9 | |
| Sink Current (DIM) | IDIM_SINK | 1.5 | 2.8 | 4 | mA | 9 | |
| Thermal Resistance Junction-to-Ambient (SOIC-8) | θJA | 96 | °C/W | Measured on JESD51-7, 4-layer PCB | 4 | ||
| Thermal Resistance Junction-to-Case (SOIC-8) | θJC | 45 | °C/W | Measured on JESD51-7, 4-layer PCB | 4 |
CAD (KiCad official)
- Symbol:
MP4056GS-Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mp4056gs-z-etched.step/mp4056gs-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp4056gs-z.step/mp4056gs-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (26 pp, sha256
5dc365158885c643, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP4056GS-Z
**Monolithic Power Systems** · LED Drivers · SOIC-8
MP4056GS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MULT | input | Multiplier input connected to the tap of a resistor divider from the rectified AC line; the half-wave sinusoid sets the internal current-loop reference and is also used for dimmer type and phase detection. |
| 2 | ZCD | input | Zero-current detection input where a negative-going edge triggers MOSFET turn-on; it also sets over-voltage detection (VZCD_OVP 4.90V to 5.70V), selects the strong/weak dimming pull-down current, and provides ZCD short-circuit protection. |
| 3 | VCC | power_in | Supply voltage for the control circuitry and internal MOSFET gate driver, with a bulk capacitor typically 22µF; recommended operating range is 11V to 27V and the absolute maximum is -0.3V to +30V. |
| 4 | DAMP | output | Gate control output for the external damping MOSFET; the DAMP pin voltage is rated -0.3V to +16.5V absolute maximum. |
| 5 | D | passive | Internal low-side main MOSFET drain, connected to the source of the external high-side MOSFET; it is rated up to +30V (drain-to-source -0.7V to +30V) and forms an internal charging path to VCC. |
| 6 | S | input | Internal low-side main MOSFET source; a sense resistor from S to GND sets the current-sense signal and the over-current protection threshold VOCP (2.56V to 2.86V, typical 2.70V). |
| 7 | GND | power_in | Ground; the current return for both the control signal and the power signal. |
| 8 | COMP | passive | Loop compensation pin; connect a compensation network (typically a capacitor to ground) to stabilize the LED driver and accurately control LED current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage VCC | VCC | -0.3 | | 30 | V | | 4 |
| Low-Side MOSFET Drain to Source Voltage | | -0.7 | | 30 | V | | 4 |
| Damp Pin Voltage | | -0.3 | | 16.5 | V | | 4 |
| Other Analog Inputs and Outputs | | -0.3 | | 6.5 | V | | 4 |
| ZCD Pin Current | | -5 | | 5 | mA | | 4 |
| Junction Temperature | TJ | | | 150 | °C | | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Supply Voltage VCC | VCC | 11 | | 27 | V | | 4 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 4 |
| Operating Range | VCC | 11 | | 27 | V | After turn on | 5 |
| VCC Upper Level: Internal Charging Circuit Stops and IC Turns On | VCCH | 9.5 | 10 | 10.5 | V | | 5 |
| VCC Re-charge and IC turns off Level in Fault Condition | VCCEN | 6.55 | 7 | 7.45 | V | Fault condition | 5 |
| VCC Charging Current from D | ID_CHARGE | 13 | 25 | 40 | mA | VD=16V, VCC=5V | 5 |
| Quiescent Current | IQ | | 800 | 1300 | µA | No switching, VCC=15V | 5 |
| Quiescent Current at Fault | IQ_FAULT | 220 | 340 | 620 | µA | Fault condition, IC latch, VCC=15V | 5 |
| Gain K | K | 0.9 | 1.28 | 1.6 | 1/V | VCOMP=2V, VMULT=0.5V | 5 |
| TRIAC Dimming Phase Off Detection Threshold | VMULT_OFF | 0.08 | 0.1 | 0.12 | V | | 5 |
| TRIAC Dimming Phase On Detection Threshold | VMULT_ON | 0.26 | 0.28 | 0.3 | V | | 5 |
| Dimming Pull-Down Turn on Threshold (trailing edge) | VMULT_DP_ON_TL | 0.43 | 0.45 | 0.47 | V | Trailing edge dimmer | 5 |
| Dimming Pull-Down Turn on Threshold (leading edge) | VMULT_DP_ON_LD | 0.22 | 0.25 | 0.28 | V | Leading edge dimmer | 5 |
| Dimming Pull-Down Turn off Threshold (trailing edge) | VMULT_DP_OFF_TL | 0.26 | 0.28 | 0.3 | V | Trailing edge dimmer | 5 |
| Dimming Pull-Down Turn off Threshold (leading edge) | VMULT_DP_OFF_LD | 0.32 | 0.35 | 0.38 | V | Leading edge dimmer | 5 |
| Leading Edge Dimming Detection Low Threshold | VMULT_LD_LOW | 0.08 | 0.1 | 0.12 | V | | 5 |
| Leading Edge Dimming Detection High Threshold | VMULT_LD_HIGH | 0.26 | 0.28 | 0.3 | V | | 5 |
| Trailing Edge Dimming Detection Low Threshold | VMULT_TL_LOW | 0.08 | 0.1 | 0.12 | V | | 6 |
| Reference Voltage | VREF | 0.4 | 0.414 | 0.428 | V | | 6 |
| COMP Lower Clamp Voltage (leading edge dimmer) | VCOMPL_LD | 1.83 | 1.88 | 1.94 | V | Leading edge dimmer | 6 |
| COMP Lower Clamp Voltage (trailing edge dimmer) | VCOMPL_TL | 1.53 | 1.58 | 1.64 | V | Trailing edge dimmer | 6 |
| Max. Source Current | ICOMP+ | | | 57 | µA | | 6 |
| Leading-Edge-Blanking Time | tLEB | 350 | 500 | 750 | ns | | 7 |
| Over-Current-Protection Leading-Edge-Blanking Time | tLEB_OCP | 260 | 350 | 550 | ns | | 7 |
| Current Sense Upper Clamp Voltage | VS CLAMP H | 1.97 | 2.07 | 2.17 | V | | 7 |
| Zero-Current-Detect Threshold | VZCD_T | 0.27 | 0.3 | 0.33 | V | Falling Edge | 7 |
| Zero-Current-Detect Hysteresis | VZCD_HYS | 550 | 590 | 625 | mV | | 7 |
| ZCD Pin Short Circuit Threshold | VZCD_SC | 78 | 100 | 122 | mV | | 7 |
| Zero-Current-Detect LEB | tZCD_LEB | 1.9 | 2.3 | 3.36 | µs | Starts at Gate Turn Off when VMULT_O ≥0.25V | 7 |
| Over-Voltage Threshold | VZCD_OVP | 4.9 | 5.3 | 5.7 | V | | 7 |
| OVP Detect LEB | tOVP_LEB | 1.9 | 2.3 | 3.36 | µs | Starts at Gate Turn Off when VMULT_O≥0.25V | 7 |
| Minimum Off Time (Normal) | tOFF_MIN | 4 | 5.3 | 8 | µs | Normal | 7 |
| Weak/Strong DP Mode detector current (leading edge dimmer) | IDP_DET_LD | 140 | 180 | 220 | µA | | 7 |
| Strong DP Mode Enable Threshold (leading edge dimmer) | VEN_DP_STR_LD | 1.13 | 1.18 | 1.23 | V | | 7 |
| Start Timer Period | tSTART | 100 | 130 | 165 | µs | | 7 |
| Continue Drain Current | ID_D-VCC | 10 | 17 | 27 | mA | | 8 |
| Strong Dimming Pull Down Current for leading edge dimmer | IDP_STRONG_LD | 27 | 35 | 43 | mA | | 8 |
| Weak Dimming Pull Down Current for leading edge dimmer | IDP_WEAK_LD | 8 | 10 | 12 | mA | | 8 |
| Pull Down Current for Trailing edge dimmer | IDP_TL | 133 | 150 | 167 | mA | | 8 |
| Low Threshold Voltage (NTC) | VL_NTC | 0.7 | 0.8 | 0.9 | V | | 8 |
| Shutdown Threshold (NTC) | VSD_NTC | 0.32 | 0.38 | 0.44 | V | | 8 |
| Shutdown Voltage Hysteresis (NTC) | VSD_NTC_HSY | 80 | 100 | 120 | mV | | 8 |
| Pull Up Current Source (NTC) | IPULL_UP_NTC | 42 | 52 | 62 | µA | | 8 |
| Turn Off Threshold (DAMP) | VMULT_DAMP_OFF | 0.22 | 0.25 | 0.28 | V | | 8 |
| Turn On Threshold (DAMP) | VMULT_DAMP_ON | 0.32 | 0.35 | 0.38 | V | | 8 |
| Upper Clamp Voltage (DAMP) | VDAMP_CLAMP_UP | 13 | 15 | 16.5 | V | | 8 |
| Source Current (DIM) | IDIM_SOURCE | 2 | 3 | 4 | mA | | 9 |
| Sink Current (DIM) | IDIM_SINK | 1.5 | 2.8 | 4 | mA | | 9 |
| Thermal Resistance Junction-to-Ambient (SOIC-8) | θJA | | 96 | | °C/W | Measured on JESD51-7, 4-layer PCB | 4 |
| Thermal Resistance Junction-to-Case (SOIC-8) | θJC | | 45 | | °C/W | Measured on JESD51-7, 4-layer PCB | 4 |
## CAD (KiCad official)
- Symbol: `MP4056GS-Z`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mp4056gs-z-etched.step` / `mp4056gs-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp4056gs-z.step` / `mp4056gs-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet, copy hosted by LCSC](docs/mp4056gs-z-datasheet.pdf) (26 pp, sha256 `5dc365158885c643`, retrieved 2026-11-18)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp4056gs-z-datasheet.pdf)