Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP4056GS-Z

Monolithic Power Systems · LED Drivers · SOIC-8

MP4056GS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MULT input Multiplier input connected to the tap of a resistor divider from the rectified AC line; the half-wave sinusoid sets the internal current-loop reference and is also used for dimmer type and phase detection.
2 ZCD input Zero-current detection input where a negative-going edge triggers MOSFET turn-on; it also sets over-voltage detection (VZCD_OVP 4.90V to 5.70V), selects the strong/weak dimming pull-down current, and provides ZCD short-circuit protection.
3 VCC power_in Supply voltage for the control circuitry and internal MOSFET gate driver, with a bulk capacitor typically 22µF; recommended operating range is 11V to 27V and the absolute maximum is -0.3V to +30V.
4 DAMP output Gate control output for the external damping MOSFET; the DAMP pin voltage is rated -0.3V to +16.5V absolute maximum.
5 D passive Internal low-side main MOSFET drain, connected to the source of the external high-side MOSFET; it is rated up to +30V (drain-to-source -0.7V to +30V) and forms an internal charging path to VCC.
6 S input Internal low-side main MOSFET source; a sense resistor from S to GND sets the current-sense signal and the over-current protection threshold VOCP (2.56V to 2.86V, typical 2.70V).
7 GND power_in Ground; the current return for both the control signal and the power signal.
8 COMP passive Loop compensation pin; connect a compensation network (typically a capacitor to ground) to stabilize the LED driver and accurately control LED current.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VCC VCC -0.3 30 V 4
Low-Side MOSFET Drain to Source Voltage -0.7 30 V 4
Damp Pin Voltage -0.3 16.5 V 4
Other Analog Inputs and Outputs -0.3 6.5 V 4
ZCD Pin Current -5 5 mA 4
Junction Temperature TJ 150 °C 4
Storage Temperature -65 150 °C 4
Supply Voltage VCC VCC 11 27 V 4
Operating Junction Temperature TJ -40 125 °C 4
Operating Range VCC 11 27 V After turn on 5
VCC Upper Level: Internal Charging Circuit Stops and IC Turns On VCCH 9.5 10 10.5 V 5
VCC Re-charge and IC turns off Level in Fault Condition VCCEN 6.55 7 7.45 V Fault condition 5
VCC Charging Current from D ID_CHARGE 13 25 40 mA VD=16V, VCC=5V 5
Quiescent Current IQ 800 1300 µA No switching, VCC=15V 5
Quiescent Current at Fault IQ_FAULT 220 340 620 µA Fault condition, IC latch, VCC=15V 5
Gain K K 0.9 1.28 1.6 1/V VCOMP=2V, VMULT=0.5V 5
TRIAC Dimming Phase Off Detection Threshold VMULT_OFF 0.08 0.1 0.12 V 5
TRIAC Dimming Phase On Detection Threshold VMULT_ON 0.26 0.28 0.3 V 5
Dimming Pull-Down Turn on Threshold (trailing edge) VMULT_DP_ON_TL 0.43 0.45 0.47 V Trailing edge dimmer 5
Dimming Pull-Down Turn on Threshold (leading edge) VMULT_DP_ON_LD 0.22 0.25 0.28 V Leading edge dimmer 5
Dimming Pull-Down Turn off Threshold (trailing edge) VMULT_DP_OFF_TL 0.26 0.28 0.3 V Trailing edge dimmer 5
Dimming Pull-Down Turn off Threshold (leading edge) VMULT_DP_OFF_LD 0.32 0.35 0.38 V Leading edge dimmer 5
Leading Edge Dimming Detection Low Threshold VMULT_LD_LOW 0.08 0.1 0.12 V 5
Leading Edge Dimming Detection High Threshold VMULT_LD_HIGH 0.26 0.28 0.3 V 5
Trailing Edge Dimming Detection Low Threshold VMULT_TL_LOW 0.08 0.1 0.12 V 6
Reference Voltage VREF 0.4 0.414 0.428 V 6
COMP Lower Clamp Voltage (leading edge dimmer) VCOMPL_LD 1.83 1.88 1.94 V Leading edge dimmer 6
COMP Lower Clamp Voltage (trailing edge dimmer) VCOMPL_TL 1.53 1.58 1.64 V Trailing edge dimmer 6
Max. Source Current ICOMP+ 57 µA 6
Leading-Edge-Blanking Time tLEB 350 500 750 ns 7
Over-Current-Protection Leading-Edge-Blanking Time tLEB_OCP 260 350 550 ns 7
Current Sense Upper Clamp Voltage VS CLAMP H 1.97 2.07 2.17 V 7
Zero-Current-Detect Threshold VZCD_T 0.27 0.3 0.33 V Falling Edge 7
Zero-Current-Detect Hysteresis VZCD_HYS 550 590 625 mV 7
ZCD Pin Short Circuit Threshold VZCD_SC 78 100 122 mV 7
Zero-Current-Detect LEB tZCD_LEB 1.9 2.3 3.36 µs Starts at Gate Turn Off when VMULT_O ≥0.25V 7
Over-Voltage Threshold VZCD_OVP 4.9 5.3 5.7 V 7
OVP Detect LEB tOVP_LEB 1.9 2.3 3.36 µs Starts at Gate Turn Off when VMULT_O≥0.25V 7
Minimum Off Time (Normal) tOFF_MIN 4 5.3 8 µs Normal 7
Weak/Strong DP Mode detector current (leading edge dimmer) IDP_DET_LD 140 180 220 µA 7
Strong DP Mode Enable Threshold (leading edge dimmer) VEN_DP_STR_LD 1.13 1.18 1.23 V 7
Start Timer Period tSTART 100 130 165 µs 7
Continue Drain Current ID_D-VCC 10 17 27 mA 8
Strong Dimming Pull Down Current for leading edge dimmer IDP_STRONG_LD 27 35 43 mA 8
Weak Dimming Pull Down Current for leading edge dimmer IDP_WEAK_LD 8 10 12 mA 8
Pull Down Current for Trailing edge dimmer IDP_TL 133 150 167 mA 8
Low Threshold Voltage (NTC) VL_NTC 0.7 0.8 0.9 V 8
Shutdown Threshold (NTC) VSD_NTC 0.32 0.38 0.44 V 8
Shutdown Voltage Hysteresis (NTC) VSD_NTC_HSY 80 100 120 mV 8
Pull Up Current Source (NTC) IPULL_UP_NTC 42 52 62 µA 8
Turn Off Threshold (DAMP) VMULT_DAMP_OFF 0.22 0.25 0.28 V 8
Turn On Threshold (DAMP) VMULT_DAMP_ON 0.32 0.35 0.38 V 8
Upper Clamp Voltage (DAMP) VDAMP_CLAMP_UP 13 15 16.5 V 8
Source Current (DIM) IDIM_SOURCE 2 3 4 mA 9
Sink Current (DIM) IDIM_SINK 1.5 2.8 4 mA 9
Thermal Resistance Junction-to-Ambient (SOIC-8) θJA 96 °C/W Measured on JESD51-7, 4-layer PCB 4
Thermal Resistance Junction-to-Case (SOIC-8) θJC 45 °C/W Measured on JESD51-7, 4-layer PCB 4

CAD (KiCad official)

  • Symbol: MP4056GS-Z
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mp4056gs-z-etched.step / mp4056gs-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp4056gs-z.step / mp4056gs-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (26 pp, sha256 5dc365158885c643, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF