main
History Download
Ray Publish 0.1.0 82637a5

MP3910AGS-Z

Monolithic Power Systems · AC-DC Controllers & Regulators · SOIC-8

MP3910AGS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground pin that serves as the gate driver return.
2 RT input Switching frequency set pin; a resistor from this pin to GND sets the switching frequency between 30kHz and 400kHz.
3 COMP bidirectional Feedback pin for isolated solutions and error amplifier output for un-isolated solutions, requiring an RC network for compensation in the un-isolated case.
4 FB input Feedback and OVP monitor pin with an internal 1.237V reference for un-isolated solutions, serving as the OVP monitor for isolated solutions, and connected to GND if not used in isolated solutions.
5 SS passive Soft-start pin; one capacitor from this pin to GND sets the COMP rise duration, the soft-start charge current (54µA typical) and the hiccup protection delay.
6 ISENSE input Current sense and application mode setting pin that senses the sense-resistor voltage for peak current mode control and cycle-by-cycle current limit (185mV typical), with 0.35V SCP threshold.
7 VCC power_in IC input supply operating from 9V to 14V, which should be bypassed to GND and kept lower than 14V in application.
8 GATE output Drives the external N-channel power MOSFET.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC, GATE to GND voltage VCC, GATE -0.3 16 V 3
All other pins voltage -0.3 6 V 3
Continuous Power Dissipation 1.38 W TA = +25°C 3
Maximum Operating Frequency 500 kHz 3
Storage Temperature -55 150 °C 3
Junction Temperature 150 °C 3
Lead Temperature 260 °C 3
Supply Voltage VCC VCC 9 14 V 3
Operating Junction Temperature TJ -40 125 °C 3
VCC UVLO Threshold VUVLO 7.4 8 8.7 V Rising edge 4
Quiescent Current IQ 400 520 μA VFB=1.35V 4
Leading Edge Blanking TLEB 214 398 ns 4
ISENSE Limit Vlimit 163 185 206 mV TJ=25°C 4
ISENSE Bias Current ISENSE 0.01 0.15 μA TJ=25°C 4
Switching Frequency FSW 308 337 363 kHz RT=6.81k 4
Switching Frequency FSW 25 30 35 kHz RT =80.6k 4
Minimum ON Time TON-MIN 214 398 ns 4
Maximum Duty Cycle DMAX 93 95 % RT=6.81k 4
OVP Reference Level VOVP 1.391 1.438 1.479 V 5
FB Reference Voltage VFB 1.222 1.237 1.252 V TJ=25°C 5
FB Reference Voltage VFB 1.211 1.237 1.258 V TJ=-40°C to 125°C 5
FB Bias Current IFB 0.01 0.15 μA VFB=1.237V, TJ= 25°C 5
VCC UVLO Hysteresis VUVLO HYS 650 mV 4
Gate Driver Impedance (Sourcing) 4.1 Ω IGATE=-20mA 4
Gate Driver Impedance (Sinking) 2 Ω IGATE=20mA 4
Error Amplifier Transconductance GEA 0.56 mA/V VFB is +-50mV from FB Reference, VCOMP=1.5V 4
Maximum Amplifier Output Current Sourcing or Sinking 75 μA 4
COMP High Voltage 2.4 V ISENSE=0V, VFB =1V 4
SCP Limit VSCP 350 mV 4
Current Sense Amplifier Gain GSENSE 2.7 V/V 4
VCOMP (Skipping Mode) Pulse Skipping Mode Operation Threshold V(comp) 0.95 V Pulse skipping mode operation 4
Soft-start Charge Current ISS 54 μA 4
Over Load Detection Discharge Current 17.8 μA 4
Discharge Current During Protection 1.66 μA 4
Charged Threshold Voltage 3.65 V 4
Over Load Shutdown Threshold Voltage 2.9 V 4
Protection Reset Threshold Voltage 0.2 V 4
Mode Detection Voltage 185 mV 5
Mode Detection Current 55 μA 5
Mode Detection Time 180 μs 5
COMP Pull up Resistor 14.4 kΩ 5
COMP Pull up Voltage 3.6 V 5
Thermal Shutdown TSD 160 ºC 5
Thermal Hysteresis 20 ºC 5
Thermal Resistance Junction-to-Ambient θJA 90 °C/W SOIC-8, measured on JESD51-7, 4-layer PCB 3
Thermal Resistance Junction-to-Case θJC 45 °C/W SOIC-8 3

CAD (KiCad official)

  • Symbol: MP3910AGS-Z
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mp3910ags-z-etched.step / mp3910ags-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp3910ags-z.step / mp3910ags-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (21 pp, sha256 796850de7a94866d, retrieved 2026-10-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF