Generated by kicad-footprint-generator · KiCad file format 20260206
MP3910AGS-Z
Monolithic Power Systems · AC-DC Controllers & Regulators · SOIC-8
MP3910AGS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground pin that serves as the gate driver return. |
| 2 | RT | input | Switching frequency set pin; a resistor from this pin to GND sets the switching frequency between 30kHz and 400kHz. |
| 3 | COMP | bidirectional | Feedback pin for isolated solutions and error amplifier output for un-isolated solutions, requiring an RC network for compensation in the un-isolated case. |
| 4 | FB | input | Feedback and OVP monitor pin with an internal 1.237V reference for un-isolated solutions, serving as the OVP monitor for isolated solutions, and connected to GND if not used in isolated solutions. |
| 5 | SS | passive | Soft-start pin; one capacitor from this pin to GND sets the COMP rise duration, the soft-start charge current (54µA typical) and the hiccup protection delay. |
| 6 | ISENSE | input | Current sense and application mode setting pin that senses the sense-resistor voltage for peak current mode control and cycle-by-cycle current limit (185mV typical), with 0.35V SCP threshold. |
| 7 | VCC | power_in | IC input supply operating from 9V to 14V, which should be bypassed to GND and kept lower than 14V in application. |
| 8 | GATE | output | Drives the external N-channel power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC, GATE to GND voltage | VCC, GATE | -0.3 | 16 | V | 3 | ||
| All other pins voltage | -0.3 | 6 | V | 3 | |||
| Continuous Power Dissipation | 1.38 | W | TA = +25°C | 3 | |||
| Maximum Operating Frequency | 500 | kHz | 3 | ||||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Lead Temperature | 260 | °C | 3 | ||||
| Supply Voltage VCC | VCC | 9 | 14 | V | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| VCC UVLO Threshold | VUVLO | 7.4 | 8 | 8.7 | V | Rising edge | 4 |
| Quiescent Current | IQ | 400 | 520 | μA | VFB=1.35V | 4 | |
| Leading Edge Blanking | TLEB | 214 | 398 | ns | 4 | ||
| ISENSE Limit | Vlimit | 163 | 185 | 206 | mV | TJ=25°C | 4 |
| ISENSE Bias Current | ISENSE | 0.01 | 0.15 | μA | TJ=25°C | 4 | |
| Switching Frequency | FSW | 308 | 337 | 363 | kHz | RT=6.81k | 4 |
| Switching Frequency | FSW | 25 | 30 | 35 | kHz | RT =80.6k | 4 |
| Minimum ON Time | TON-MIN | 214 | 398 | ns | 4 | ||
| Maximum Duty Cycle | DMAX | 93 | 95 | % | RT=6.81k | 4 | |
| OVP Reference Level | VOVP | 1.391 | 1.438 | 1.479 | V | 5 | |
| FB Reference Voltage | VFB | 1.222 | 1.237 | 1.252 | V | TJ=25°C | 5 |
| FB Reference Voltage | VFB | 1.211 | 1.237 | 1.258 | V | TJ=-40°C to 125°C | 5 |
| FB Bias Current | IFB | 0.01 | 0.15 | μA | VFB=1.237V, TJ= 25°C | 5 | |
| VCC UVLO Hysteresis | VUVLO HYS | 650 | mV | 4 | |||
| Gate Driver Impedance (Sourcing) | 4.1 | Ω | IGATE=-20mA | 4 | |||
| Gate Driver Impedance (Sinking) | 2 | Ω | IGATE=20mA | 4 | |||
| Error Amplifier Transconductance | GEA | 0.56 | mA/V | VFB is +-50mV from FB Reference, VCOMP=1.5V | 4 | ||
| Maximum Amplifier Output Current Sourcing or Sinking | 75 | μA | 4 | ||||
| COMP High Voltage | 2.4 | V | ISENSE=0V, VFB =1V | 4 | |||
| SCP Limit | VSCP | 350 | mV | 4 | |||
| Current Sense Amplifier Gain | GSENSE | 2.7 | V/V | 4 | |||
| VCOMP (Skipping Mode) Pulse Skipping Mode Operation Threshold | V(comp) | 0.95 | V | Pulse skipping mode operation | 4 | ||
| Soft-start Charge Current | ISS | 54 | μA | 4 | |||
| Over Load Detection Discharge Current | 17.8 | μA | 4 | ||||
| Discharge Current During Protection | 1.66 | μA | 4 | ||||
| Charged Threshold Voltage | 3.65 | V | 4 | ||||
| Over Load Shutdown Threshold Voltage | 2.9 | V | 4 | ||||
| Protection Reset Threshold Voltage | 0.2 | V | 4 | ||||
| Mode Detection Voltage | 185 | mV | 5 | ||||
| Mode Detection Current | 55 | μA | 5 | ||||
| Mode Detection Time | 180 | μs | 5 | ||||
| COMP Pull up Resistor | 14.4 | kΩ | 5 | ||||
| COMP Pull up Voltage | 3.6 | V | 5 | ||||
| Thermal Shutdown | TSD | 160 | ºC | 5 | |||
| Thermal Hysteresis | 20 | ºC | 5 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 90 | °C/W | SOIC-8, measured on JESD51-7, 4-layer PCB | 3 | ||
| Thermal Resistance Junction-to-Case | θJC | 45 | °C/W | SOIC-8 | 3 |
CAD (KiCad official)
- Symbol:
MP3910AGS-Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mp3910ags-z-etched.step/mp3910ags-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp3910ags-z.step/mp3910ags-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (21 pp, sha256
796850de7a94866d, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).