main
Ray
Publish 0.1.0
97aebbb
MP26029GTF-0000-Z
Monolithic Power Systems · Battery Management ICs · SOT-563
MP26029GTF-0000-Z from Monolithic Power Systems, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BATT | power_out | Battery positive terminal; place a ceramic capacitor of at least 20µF between BATT and GND as close to the IC as possible. |
| 2 | ISET | input | Sets the CC charge current through an external resistor from ISET to GND, and floating ISET disables charging. |
| 3 | GND | power_in | Power ground. |
| 4 | NTC | input | Temperature sense input for an NTC thermistor, biased by a resistor divider from IN to NTC to GND, with charging suspended when NTC is outside its hot/cold window. |
| 5 | STAT | output | Open-drain status output that is pulled down to GND during charging and needs an external pull-up voltage source to give a logic high. |
| 6 | IN | power_in | Input power; place a ceramic capacitor of at least 4.7µF from IN to GND as close to the IC as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOT-563 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input operation voltage | VIN | 4.05 | 5 | 6.05 | V | 5 | |
| Input over-voltage protection trigger threshold | VIN_OVLO | 6.05 | 6.25 | 6.45 | V | VIN rising | 5 |
| Input under-voltage lockout threshold | VIN_UVLO | 3.6 | 3.75 | 3.9 | V | VIN falling | 5 |
| Input vs. battery voltage headroom threshold | VHDRM | 100 | 125 | 150 | mV | VIN rising | 5 |
| Battery charge voltage regulation | VBATT_REG | 4.179 | 4.2 | 4.221 | V | TA = 25°C | 5 |
| Fast charge current | ICC | 20 | 30 | 40 | mA | VIN = 5V, VBATT = 3.8V, RISET = 80.6kΩ | 5 |
| Fast charge current | ICC | 95 | 110 | 125 | mA | VIN = 5V, VBATT = 3.8V, RISET = 24.9kΩ | 5 |
| Fast charge current | ICC | 125 | 145 | 165 | mA | VIN = 5V, VBATT = 3.8V, RISET = 19.02kΩ | 5 |
| Fast charge current | ICC | 460 | 500 | 540 | mA | VIN = 5V, VBATT = 3.8V, RISET = 6.04kΩ | 5 |
| Fast charge current | ICC | 630 | 675 | 720 | mA | VIN = 5V, VBATT = 3.8V, RISET = 4.58kΩ | 5 |
| Fast charge current | ICC | 900 | 958 | 1016 | mA | VIN = 5V, VBATT = 3.8V, RISET = 3.3kΩ | 5 |
| Fast charge current | ICC | 995 | 1055 | 1115 | mA | VIN = 5V, VBATT = 3.8V, RISET = 3kΩ | 5 |
| Termination current accuracy | ITERM | 75 | 89 | 125 | mA | ITERM = 100mA | 5 |
| Termination current accuracy | ITERM | 36 | 42 | 60 | mA | ITERM = 48mA | 5 |
| Termination current accuracy | ITERM | 7 | 9.6 | 13 | mA | ITERM = 10mA | 5 |
| Termination current accuracy | ITERM | 1 | 2.7 | 5 | mA | ITERM = 3mA | 5 |
| Pre-charge current accuracy | IPRE | 70 | 89 | 110 | mA | IPRE=100mA | 6 |
| Pre-charge current accuracy | IPRE | 7 | 9.5 | 13 | mA | IPRE = 10mA | 6 |
| Pre-charge current accuracy | IPRE | 1.6 | 2.8 | 4 | mA | IPRE = 3mA | 6 |
| Safety timer for charging cycle | tTMR | 6.25 | 7 | 7.75 | hours | tTMR = 7 hours | 6 |
| Safety timer for pre-charging cycle | 0.75 | 0.875 | 1 | hours | 6 | ||
| NTC output current | INTC | -100 | 0 | 100 | nA | Charge disabled | 6 |
| NTC cold temp rising threshold | VCOLD | 59.5 | 61.5 | 63.5 | % of VIN | As a percentage of VIN | 6 |
| NTC hot temp falling threshold | VHOT | 26.5 | 28.5 | 30.5 | % of VIN | As a percentage of VIN | 6 |
| IN to BATT switch on resistance | RON_BATT | 450 | mΩ | VIN = 5V, ICC = 100mA, SOT563 | 5 | ||
| Input quiescent current | IIN_Q | 415 | µA | ICC = 0A,ISET pin is float | 5 | ||
| Battery quiescent current | IBATT_Q | 100 | nA | VIN = 0V, VBATT = 4.2V | 5 | ||
| Input over-voltage protection recover threshold | 405 | mV | 5 | ||||
| Input under-voltage lockout threshold hysteresis | 150 | mV | 5 | ||||
| Input minimum voltage regulation | VIN_MIN | 4.5 | V | 5 | |||
| Input vs. battery voltage headroom hysteresis | 75 | mV | 5 | ||||
| Charge termination current threshold | ITERM | 10 | %ICC | VIN = 5V, VBATT = 4.2V | 5 | ||
| Pre-charge current | IPRE | 10 | %ICC | VIN = 5V, VBATT = 2.0V | 6 | ||
| Pre-charge to fast charge threshold | VBATT_PRE | 3 | V | VBATT rising | 6 | ||
| Pre-charge to fast charge threshold hysteresis | 250 | mV | 6 | ||||
| Auto-recharge battery voltage threshold | VRECH | 200 | mV | 6 | |||
| Junction temperature regulation | TJ_REG | 120 | °C | Thermal limit = 120°C | 6 | ||
| Thermal shutdown threshold | TJ_SHDN | 150 | °C | 6 | |||
| Thermal shutdown hysteresis | 20 | °C | 6 | ||||
| NTC cold temp rising threshold hysteresis | 90 | mV | VIN = 5V | 6 | |||
| NTC hot temp falling threshold hysteresis | 90 | mV | VIN = 5V | 6 | |||
| IN, STAT to GND | -0.3 | 13 | V | 4 | |||
| ISET, NTC to GND | -0.3 | 5 | V | 4 | |||
| All other pins to GND | -0.3 | 6 | V | 4 | |||
| ESD Rating (HBM) | 2 | kV | all pins | 4 | |||
| ESD Rating (CDM) | 500 | V | all pins | 4 | |||
| Continuous power dissipation | 0.96 | W | TA = +25°C, SOT563 (1.6x1.6) | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Lead temperature (solder) | 260 | °C | 4 | ||||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Supply voltage | VIN | 4.35 | 5.5 | V | USB input | 4 | |
| Charge current | ICC | 1 | A | up to 1A | 4 | ||
| Battery voltage | VBATT | 4.5 | V | up to 4.5V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Thermal resistance junction-to-ambient | θJA | 130 | °C/W | SOT563 (1.6x1.6), JESD51-7 4-layer PCB | 4 | ||
| Thermal resistance junction-to-case | θJC | 60 | °C/W | SOT563 (1.6x1.6), JESD51-7 4-layer PCB | 4 |
CAD (KiCad official)
- Symbol:
MP26029GTF-0000-Z - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
mp26029gtf-0000-z-etched.step/mp26029gtf-0000-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp26029gtf-0000-z.step/mp26029gtf-0000-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (20 pp, sha256
ef1ea7ce59e72282, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP26029GTF-0000-Z
**Monolithic Power Systems** · Battery Management ICs · SOT-563
MP26029GTF-0000-Z from Monolithic Power Systems, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BATT | power_out | Battery positive terminal; place a ceramic capacitor of at least 20µF between BATT and GND as close to the IC as possible. |
| 2 | ISET | input | Sets the CC charge current through an external resistor from ISET to GND, and floating ISET disables charging. |
| 3 | GND | power_in | Power ground. |
| 4 | NTC | input | Temperature sense input for an NTC thermistor, biased by a resistor divider from IN to NTC to GND, with charging suspended when NTC is outside its hot/cold window. |
| 5 | STAT | output | Open-drain status output that is pulled down to GND during charging and needs an external pull-up voltage source to give a logic high. |
| 6 | IN | power_in | Input power; place a ceramic capacitor of at least 4.7µF from IN to GND as close to the IC as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOT-563 |
| Category | Power Management |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input operation voltage | VIN | 4.05 | 5 | 6.05 | V | | 5 |
| Input over-voltage protection trigger threshold | VIN_OVLO | 6.05 | 6.25 | 6.45 | V | VIN rising | 5 |
| Input under-voltage lockout threshold | VIN_UVLO | 3.6 | 3.75 | 3.9 | V | VIN falling | 5 |
| Input vs. battery voltage headroom threshold | VHDRM | 100 | 125 | 150 | mV | VIN rising | 5 |
| Battery charge voltage regulation | VBATT_REG | 4.179 | 4.2 | 4.221 | V | TA = 25°C | 5 |
| Fast charge current | ICC | 20 | 30 | 40 | mA | VIN = 5V, VBATT = 3.8V, RISET = 80.6kΩ | 5 |
| Fast charge current | ICC | 95 | 110 | 125 | mA | VIN = 5V, VBATT = 3.8V, RISET = 24.9kΩ | 5 |
| Fast charge current | ICC | 125 | 145 | 165 | mA | VIN = 5V, VBATT = 3.8V, RISET = 19.02kΩ | 5 |
| Fast charge current | ICC | 460 | 500 | 540 | mA | VIN = 5V, VBATT = 3.8V, RISET = 6.04kΩ | 5 |
| Fast charge current | ICC | 630 | 675 | 720 | mA | VIN = 5V, VBATT = 3.8V, RISET = 4.58kΩ | 5 |
| Fast charge current | ICC | 900 | 958 | 1016 | mA | VIN = 5V, VBATT = 3.8V, RISET = 3.3kΩ | 5 |
| Fast charge current | ICC | 995 | 1055 | 1115 | mA | VIN = 5V, VBATT = 3.8V, RISET = 3kΩ | 5 |
| Termination current accuracy | ITERM | 75 | 89 | 125 | mA | ITERM = 100mA | 5 |
| Termination current accuracy | ITERM | 36 | 42 | 60 | mA | ITERM = 48mA | 5 |
| Termination current accuracy | ITERM | 7 | 9.6 | 13 | mA | ITERM = 10mA | 5 |
| Termination current accuracy | ITERM | 1 | 2.7 | 5 | mA | ITERM = 3mA | 5 |
| Pre-charge current accuracy | IPRE | 70 | 89 | 110 | mA | IPRE=100mA | 6 |
| Pre-charge current accuracy | IPRE | 7 | 9.5 | 13 | mA | IPRE = 10mA | 6 |
| Pre-charge current accuracy | IPRE | 1.6 | 2.8 | 4 | mA | IPRE = 3mA | 6 |
| Safety timer for charging cycle | tTMR | 6.25 | 7 | 7.75 | hours | tTMR = 7 hours | 6 |
| Safety timer for pre-charging cycle | | 0.75 | 0.875 | 1 | hours | | 6 |
| NTC output current | INTC | -100 | 0 | 100 | nA | Charge disabled | 6 |
| NTC cold temp rising threshold | VCOLD | 59.5 | 61.5 | 63.5 | % of VIN | As a percentage of VIN | 6 |
| NTC hot temp falling threshold | VHOT | 26.5 | 28.5 | 30.5 | % of VIN | As a percentage of VIN | 6 |
| IN to BATT switch on resistance | RON_BATT | | | 450 | mΩ | VIN = 5V, ICC = 100mA, SOT563 | 5 |
| Input quiescent current | IIN_Q | | | 415 | µA | ICC = 0A,ISET pin is float | 5 |
| Battery quiescent current | IBATT_Q | | | 100 | nA | VIN = 0V, VBATT = 4.2V | 5 |
| Input over-voltage protection recover threshold | | | 405 | | mV | | 5 |
| Input under-voltage lockout threshold hysteresis | | | 150 | | mV | | 5 |
| Input minimum voltage regulation | VIN_MIN | | 4.5 | | V | | 5 |
| Input vs. battery voltage headroom hysteresis | | | 75 | | mV | | 5 |
| Charge termination current threshold | ITERM | | 10 | | %ICC | VIN = 5V, VBATT = 4.2V | 5 |
| Pre-charge current | IPRE | | 10 | | %ICC | VIN = 5V, VBATT = 2.0V | 6 |
| Pre-charge to fast charge threshold | VBATT_PRE | | 3 | | V | VBATT rising | 6 |
| Pre-charge to fast charge threshold hysteresis | | | 250 | | mV | | 6 |
| Auto-recharge battery voltage threshold | VRECH | | 200 | | mV | | 6 |
| Junction temperature regulation | TJ_REG | | 120 | | °C | Thermal limit = 120°C | 6 |
| Thermal shutdown threshold | TJ_SHDN | | 150 | | °C | | 6 |
| Thermal shutdown hysteresis | | | 20 | | °C | | 6 |
| NTC cold temp rising threshold hysteresis | | | 90 | | mV | VIN = 5V | 6 |
| NTC hot temp falling threshold hysteresis | | | 90 | | mV | VIN = 5V | 6 |
| IN, STAT to GND | | -0.3 | | 13 | V | | 4 |
| ISET, NTC to GND | | -0.3 | | 5 | V | | 4 |
| All other pins to GND | | -0.3 | | 6 | V | | 4 |
| ESD Rating (HBM) | | | | 2 | kV | all pins | 4 |
| ESD Rating (CDM) | | | | 500 | V | all pins | 4 |
| Continuous power dissipation | | | | 0.96 | W | TA = +25°C, SOT563 (1.6x1.6) | 4 |
| Junction temperature | | | | 150 | °C | | 4 |
| Lead temperature (solder) | | | | 260 | °C | | 4 |
| Storage temperature | | -65 | | 150 | °C | | 4 |
| Supply voltage | VIN | 4.35 | | 5.5 | V | USB input | 4 |
| Charge current | ICC | | | 1 | A | up to 1A | 4 |
| Battery voltage | VBATT | | | 4.5 | V | up to 4.5V | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Thermal resistance junction-to-ambient | θJA | | 130 | | °C/W | SOT563 (1.6x1.6), JESD51-7 4-layer PCB | 4 |
| Thermal resistance junction-to-case | θJC | | 60 | | °C/W | SOT563 (1.6x1.6), JESD51-7 4-layer PCB | 4 |
## CAD (KiCad official)
- Symbol: `MP26029GTF-0000-Z`
- Footprint: `Package_TO_SOT_SMD:SOT-563`
- 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files: `mp26029gtf-0000-z-etched.step` / `mp26029gtf-0000-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp26029gtf-0000-z.step` / `mp26029gtf-0000-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mp26029gtf-0000-z-datasheet.pdf) (20 pp, sha256 `ef1ea7ce59e72282`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp26029gtf-0000-z-datasheet.pdf)