main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp26029gtf-0000-z: viewers · Ray
mp26029gtf-0000-z-etched.glb Publish 0.1.0 · Ray
mp26029gtf-0000-z-etched.step mp26029gtf-0000-z: factory component page (tier=lcsc) · Ray
mp26029gtf-0000-z-hero.glb mp26029gtf-0000-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp26029gtf-0000-z-hero.overlay.json Publish 0.1.0 · Ray
mp26029gtf-0000-z.glb Publish 0.1.0 · Ray
mp26029gtf-0000-z.kicad_mod Publish 0.1.0 · Ray
mp26029gtf-0000-z.kicad_sym Publish 0.1.0 · Ray
mp26029gtf-0000-z.lbr Publish 0.1.0 · Ray
mp26029gtf-0000-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

MP26029GTF-0000-Z

Monolithic Power Systems · Battery Management ICs · SOT-563

MP26029GTF-0000-Z from Monolithic Power Systems, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BATT power_out Battery positive terminal; place a ceramic capacitor of at least 20µF between BATT and GND as close to the IC as possible.
2 ISET input Sets the CC charge current through an external resistor from ISET to GND, and floating ISET disables charging.
3 GND power_in Power ground.
4 NTC input Temperature sense input for an NTC thermistor, biased by a resistor divider from IN to NTC to GND, with charging suspended when NTC is outside its hot/cold window.
5 STAT output Open-drain status output that is pulled down to GND during charging and needs an external pull-up voltage source to give a logic high.
6 IN power_in Input power; place a ceramic capacitor of at least 4.7µF from IN to GND as close to the IC as possible.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOT-563
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input operation voltage VIN 4.05 5 6.05 V 5
Input over-voltage protection trigger threshold VIN_OVLO 6.05 6.25 6.45 V VIN rising 5
Input under-voltage lockout threshold VIN_UVLO 3.6 3.75 3.9 V VIN falling 5
Input vs. battery voltage headroom threshold VHDRM 100 125 150 mV VIN rising 5
Battery charge voltage regulation VBATT_REG 4.179 4.2 4.221 V TA = 25°C 5
Fast charge current ICC 20 30 40 mA VIN = 5V, VBATT = 3.8V, RISET = 80.6kΩ 5
Fast charge current ICC 95 110 125 mA VIN = 5V, VBATT = 3.8V, RISET = 24.9kΩ 5
Fast charge current ICC 125 145 165 mA VIN = 5V, VBATT = 3.8V, RISET = 19.02kΩ 5
Fast charge current ICC 460 500 540 mA VIN = 5V, VBATT = 3.8V, RISET = 6.04kΩ 5
Fast charge current ICC 630 675 720 mA VIN = 5V, VBATT = 3.8V, RISET = 4.58kΩ 5
Fast charge current ICC 900 958 1016 mA VIN = 5V, VBATT = 3.8V, RISET = 3.3kΩ 5
Fast charge current ICC 995 1055 1115 mA VIN = 5V, VBATT = 3.8V, RISET = 3kΩ 5
Termination current accuracy ITERM 75 89 125 mA ITERM = 100mA 5
Termination current accuracy ITERM 36 42 60 mA ITERM = 48mA 5
Termination current accuracy ITERM 7 9.6 13 mA ITERM = 10mA 5
Termination current accuracy ITERM 1 2.7 5 mA ITERM = 3mA 5
Pre-charge current accuracy IPRE 70 89 110 mA IPRE=100mA 6
Pre-charge current accuracy IPRE 7 9.5 13 mA IPRE = 10mA 6
Pre-charge current accuracy IPRE 1.6 2.8 4 mA IPRE = 3mA 6
Safety timer for charging cycle tTMR 6.25 7 7.75 hours tTMR = 7 hours 6
Safety timer for pre-charging cycle 0.75 0.875 1 hours 6
NTC output current INTC -100 0 100 nA Charge disabled 6
NTC cold temp rising threshold VCOLD 59.5 61.5 63.5 % of VIN As a percentage of VIN 6
NTC hot temp falling threshold VHOT 26.5 28.5 30.5 % of VIN As a percentage of VIN 6
IN to BATT switch on resistance RON_BATT 450 mΩ VIN = 5V, ICC = 100mA, SOT563 5
Input quiescent current IIN_Q 415 µA ICC = 0A,ISET pin is float 5
Battery quiescent current IBATT_Q 100 nA VIN = 0V, VBATT = 4.2V 5
Input over-voltage protection recover threshold 405 mV 5
Input under-voltage lockout threshold hysteresis 150 mV 5
Input minimum voltage regulation VIN_MIN 4.5 V 5
Input vs. battery voltage headroom hysteresis 75 mV 5
Charge termination current threshold ITERM 10 %ICC VIN = 5V, VBATT = 4.2V 5
Pre-charge current IPRE 10 %ICC VIN = 5V, VBATT = 2.0V 6
Pre-charge to fast charge threshold VBATT_PRE 3 V VBATT rising 6
Pre-charge to fast charge threshold hysteresis 250 mV 6
Auto-recharge battery voltage threshold VRECH 200 mV 6
Junction temperature regulation TJ_REG 120 °C Thermal limit = 120°C 6
Thermal shutdown threshold TJ_SHDN 150 °C 6
Thermal shutdown hysteresis 20 °C 6
NTC cold temp rising threshold hysteresis 90 mV VIN = 5V 6
NTC hot temp falling threshold hysteresis 90 mV VIN = 5V 6
IN, STAT to GND -0.3 13 V 4
ISET, NTC to GND -0.3 5 V 4
All other pins to GND -0.3 6 V 4
ESD Rating (HBM) 2 kV all pins 4
ESD Rating (CDM) 500 V all pins 4
Continuous power dissipation 0.96 W TA = +25°C, SOT563 (1.6x1.6) 4
Junction temperature 150 °C 4
Lead temperature (solder) 260 °C 4
Storage temperature -65 150 °C 4
Supply voltage VIN 4.35 5.5 V USB input 4
Charge current ICC 1 A up to 1A 4
Battery voltage VBATT 4.5 V up to 4.5V 4
Operating junction temperature TJ -40 125 °C 4
Thermal resistance junction-to-ambient θJA 130 °C/W SOT563 (1.6x1.6), JESD51-7 4-layer PCB 4
Thermal resistance junction-to-case θJC 60 °C/W SOT563 (1.6x1.6), JESD51-7 4-layer PCB 4

CAD (KiCad official)

  • Symbol: MP26029GTF-0000-Z
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: mp26029gtf-0000-z-etched.step / mp26029gtf-0000-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp26029gtf-0000-z.step / mp26029gtf-0000-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (20 pp, sha256 ef1ea7ce59e72282, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF