MP2562DS-LF-Z

{
  "slug": "mp2562ds-lf-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "mp2562ds-lf-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp2562ds-lf-z.kicad_sym",
    "mp2562ds-lf-z.kicad_mod",
    "mp2562ds-lf-z.glb",
    "mp2562ds-lf-z.step",
    "mp2562ds-lf-z.lbr",
    "docs/hero.png",
    "docs/mp2562ds-lf-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp2562ds-lf-z-hero.glb",
    "mp2562ds-lf-z-hero.overlay.json",
    "mp2562ds-lf-z-etched.glb"
  ],
  "component": {
    "mpn": "MP2562DS-LF-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586187119769899008",
    "parts": {
      "symbol": "mp2562ds-lf-z.kicad_sym",
      "footprint": "mp2562ds-lf-z.kicad_mod",
      "model_3d": "mp2562ds-lf-z-hero.glb",
      "model_3d_plain": "mp2562ds-lf-z-etched.glb",
      "model_3d_step": "mp2562ds-lf-z-etched.step",
      "model_3d_step_plain": "mp2562ds-lf-z.step",
      "lbr": "mp2562ds-lf-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C93647",
      "digikey": "1589-1602-2-ND",
      "mouser": "946-MP2562DSLFZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:46:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-1602-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "946-MP2562DSLFZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switch node and output of the high-side switch; a low forward drop Schottky diode to ground is required close to the SW pins, and VSW is rated from -0.3V (-5V for <10ns) to VIN +0.3V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input: pulling it below the specified threshold (falling threshold 1.2V, rising 1.5V) shuts the chip down, while floating or pulling it above the threshold enables the chip."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal error amplifier for loop frequency compensation; COMP is clamped between 0.9V and 2.0V during operation and should not be pulled up beyond 2.6V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Input to the error amplifier; the output voltage is set by a resistive divider from VOUT to GND, scaling VOUT to the internal 0.8V reference (VFB 0.776V to 0.824V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connect as close as possible to the output capacitor to shorten the high-current switch paths."
      },
      {
        "number": "6",
        "name": "FREQ",
        "type": "input",
        "description": "Switching frequency program input; a resistor from this pin to ground sets the switching frequency up to 4MHz (for example RFREQ = 18kΩ gives 3.2 to 4.8MHz)."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply for the internal control circuitry, both BST regulators and the high-side switch, operating from 4.5V to 50V; a decoupling capacitor to ground must be placed close to this pin."
      },
      {
        "number": "8",
        "name": "BST",
        "type": "power_out",
        "description": "Bootstrap positive supply for the internal floating high-side MOSFET driver; a bypass capacitor connects between BST and SW, and BST to SW is rated to 6V maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOIC8 pin numbers are taken from the SOIC8 column of the PIN FUNCTIONS table (page 4) and cross-; The datasheet's exposed-pad note (GND pad) applies to the QFN10 package only; the SOIC8 package has ; Pin type for BST is a judgment call: the datasheet describes it as the positive supply for the float"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0844,
        "at": "2026-10-21T01:44:01"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586187119769899008",
        "pages": 20,
        "sha256": "2644b854fdbcfbab",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp2562ds-lf-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp2562ds-lf-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "901826bff6a6b3fcb62e3e52b462be37758519fdbac478206c06088b3cbce5c4",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}