main
History Download
Ray Publish 0.1.0 554116e

MP2483DS-LF-Z

Monolithic Power Systems · LED Drivers · SOIC-14

MP2483DS-LF-Z from Monolithic Power Systems, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection on the SOIC14 package; the datasheet lists pins 1, 7, 8 and 14 as NC.
2 VDD power_in Supply voltage input operating from +4.5V to +55V unregulated (with respect to VSS), and C1 is needed to prevent large voltage spikes from appearing at the input.
3 VSS power_in Power return and voltage reference for the regulated output, to be connected to the lowest potential in the circuit and placed outside the D1 to C1 ground path to avoid switching noise.
4 OVP input Over-voltage protection pin programmed with a voltage divider; the switch turns off when OVP reaches the 1.2V shutdown threshold, and normal operation requires OVP programmed from 0.4V to 1.2V.
5 FB input LED current feedback input, where the regulated voltage across the current sensing resistor between FB and VSS is 0.198V.
6 COMP output Output of the error amplifier, where a 1nF or larger capacitor should be connected to improve stability and provide soft start and PWM dimming.
7 NC unconnected No connection.
8 NC unconnected No connection.
9 RSET passive Frequency set pin where a resistor to VSS sets the switching frequency (20kΩ to 150kΩ recommended, about 1.3MHz to 350kHz) with a 1nF bypass capacitor to VSS, and leaving it open gives a default 1.35MHz.
10 EN/DIM input On/off and dimming input where a voltage above 0.6V turns the chip on, and DC dimming ramps LED current from 0% to 100% between 0.7V and 1.4V relative to INGND while PWM dimming requires a 100Hz to 2kHz square wave with amplitude above 1.4V.
11 INGND power_in Input ground reference that serves as the reference for the EN/DIM signal.
12 BST passive Bootstrap pin where a 100nF or larger ceramic capacitor connected between SW and BST forms a floating supply to drive the power switch gate above the supply voltage.
13 SW output Switch output that is the source of the internal MOSFET, to be connected to the power inductor and the cathode of the Schottky rectifier.
14 NC unconnected No connection.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-14
Category LED Drivers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 0.188 0.198 0.208 V 4.5V ≤ VIN ≤ 55V 3
Feedback Current IFB -50 50 nA VFB = 0.22V 3
Default Oscillator Frequency fSW_default 1.05 1.35 1.65 MHz VFB = 0.19V, Rset open 3
Under Voltage Lockout Threshold 3 3.3 3.6 V Rising 3
Minimum EN Dimming Threshold 0.6 0.7 0.8 V VFB = 0V 3
Maximum EN Dimming Threshold 1.25 1.4 1.5 V VFB = 0.2V 3
Supply Current (Quiescent) IQ 0.8 1 mA VEN = 2V, VFB = 1V 3
Supply Current (Quiescent) at EN Off Ioff 3.4 15 μA VEN=0V 3
Open LED OV Threshold VOVP_th 1.1 1.2 1.3 V 3
VDD, VSS Supply Voltage (absolute maximum) VDD, VSS 60 V 2
VSW, VSS VSW, VSS -0.3 60.3 V 2
VEN/Dim, VINGND VEN/Dim, VINGND -0.3 6 V 2
VINGND, VSS VINGND, VSS -0.3 60 V 2
Other pins, VSS Other pins, VSS -0.3 6 V 2
Junction Temperature 150 °C 2
Storage Temperature -65 150 °C 2
Supply Voltage VDD, VSS (recommended) VDD, VSS 4.5 55 V 2
Operating Junction Temperature TJ -40 125 °C 2
Free Air Temperature TA -40 85 °C Ordering information rating for MP2483DS 2
UVLO Threshold Hysteresis 100 mV 3
Open LED OV Hysteresis VOVP_hys 60 mV 3
Switch-On Resistance RDS(ON) 280 mΩ 3
Switch Leakage Current 1 μA VEN = 0V, VSW = 0V 3
Current Limit 3 A 3
Oscillator Frequency fSW 0.5 MHz VFB = 0.19V, Rset=100kΩ 3
Fold-back Frequency 250 kHz VFB = 0V, VOVP=0V 3
Maximum Duty Cycle 90 % VFB = 0.19V 3
Minimum On-Time tON 100 ns 3
EN Input Current 2.1 μA VEN = 2V 3
EN OFF Threshold (w/Respect to INGND) 0.4 V VEN Falling 3
EN ON Threshold (w/Respect to INGND) 0.6 V VEN Rising 3
Thermal Shutdown 150 °C Guaranteed by design (note 5) 3
Thermal Resistance Junction-to-Case θJC 38 °C/W SOIC14, measured on JESD51-7, 4-layer PCB 2

CAD (KiCad official)

  • Symbol: MP2483DS-LF-Z
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mp2483ds-lf-z-etched.step / mp2483ds-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp2483ds-lf-z.step / mp2483ds-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (15 pp, sha256 2b9bd98f97890ebc, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF