Generated by kicad-footprint-generator · KiCad file format 20260206
MP2483DS-LF-Z
Monolithic Power Systems · LED Drivers · SOIC-14
MP2483DS-LF-Z from Monolithic Power Systems, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection on the SOIC14 package; the datasheet lists pins 1, 7, 8 and 14 as NC. |
| 2 | VDD | power_in | Supply voltage input operating from +4.5V to +55V unregulated (with respect to VSS), and C1 is needed to prevent large voltage spikes from appearing at the input. |
| 3 | VSS | power_in | Power return and voltage reference for the regulated output, to be connected to the lowest potential in the circuit and placed outside the D1 to C1 ground path to avoid switching noise. |
| 4 | OVP | input | Over-voltage protection pin programmed with a voltage divider; the switch turns off when OVP reaches the 1.2V shutdown threshold, and normal operation requires OVP programmed from 0.4V to 1.2V. |
| 5 | FB | input | LED current feedback input, where the regulated voltage across the current sensing resistor between FB and VSS is 0.198V. |
| 6 | COMP | output | Output of the error amplifier, where a 1nF or larger capacitor should be connected to improve stability and provide soft start and PWM dimming. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | RSET | passive | Frequency set pin where a resistor to VSS sets the switching frequency (20kΩ to 150kΩ recommended, about 1.3MHz to 350kHz) with a 1nF bypass capacitor to VSS, and leaving it open gives a default 1.35MHz. |
| 10 | EN/DIM | input | On/off and dimming input where a voltage above 0.6V turns the chip on, and DC dimming ramps LED current from 0% to 100% between 0.7V and 1.4V relative to INGND while PWM dimming requires a 100Hz to 2kHz square wave with amplitude above 1.4V. |
| 11 | INGND | power_in | Input ground reference that serves as the reference for the EN/DIM signal. |
| 12 | BST | passive | Bootstrap pin where a 100nF or larger ceramic capacitor connected between SW and BST forms a floating supply to drive the power switch gate above the supply voltage. |
| 13 | SW | output | Switch output that is the source of the internal MOSFET, to be connected to the power inductor and the cathode of the Schottky rectifier. |
| 14 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-14 |
| Category | LED Drivers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.188 | 0.198 | 0.208 | V | 4.5V ≤ VIN ≤ 55V | 3 |
| Feedback Current | IFB | -50 | 50 | nA | VFB = 0.22V | 3 | |
| Default Oscillator Frequency | fSW_default | 1.05 | 1.35 | 1.65 | MHz | VFB = 0.19V, Rset open | 3 |
| Under Voltage Lockout Threshold | 3 | 3.3 | 3.6 | V | Rising | 3 | |
| Minimum EN Dimming Threshold | 0.6 | 0.7 | 0.8 | V | VFB = 0V | 3 | |
| Maximum EN Dimming Threshold | 1.25 | 1.4 | 1.5 | V | VFB = 0.2V | 3 | |
| Supply Current (Quiescent) | IQ | 0.8 | 1 | mA | VEN = 2V, VFB = 1V | 3 | |
| Supply Current (Quiescent) at EN Off | Ioff | 3.4 | 15 | μA | VEN=0V | 3 | |
| Open LED OV Threshold | VOVP_th | 1.1 | 1.2 | 1.3 | V | 3 | |
| VDD, VSS Supply Voltage (absolute maximum) | VDD, VSS | 60 | V | 2 | |||
| VSW, VSS | VSW, VSS | -0.3 | 60.3 | V | 2 | ||
| VEN/Dim, VINGND | VEN/Dim, VINGND | -0.3 | 6 | V | 2 | ||
| VINGND, VSS | VINGND, VSS | -0.3 | 60 | V | 2 | ||
| Other pins, VSS | Other pins, VSS | -0.3 | 6 | V | 2 | ||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Supply Voltage VDD, VSS (recommended) | VDD, VSS | 4.5 | 55 | V | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Free Air Temperature | TA | -40 | 85 | °C | Ordering information rating for MP2483DS | 2 | |
| UVLO Threshold Hysteresis | 100 | mV | 3 | ||||
| Open LED OV Hysteresis | VOVP_hys | 60 | mV | 3 | |||
| Switch-On Resistance | RDS(ON) | 280 | mΩ | 3 | |||
| Switch Leakage Current | 1 | μA | VEN = 0V, VSW = 0V | 3 | |||
| Current Limit | 3 | A | 3 | ||||
| Oscillator Frequency | fSW | 0.5 | MHz | VFB = 0.19V, Rset=100kΩ | 3 | ||
| Fold-back Frequency | 250 | kHz | VFB = 0V, VOVP=0V | 3 | |||
| Maximum Duty Cycle | 90 | % | VFB = 0.19V | 3 | |||
| Minimum On-Time | tON | 100 | ns | 3 | |||
| EN Input Current | 2.1 | μA | VEN = 2V | 3 | |||
| EN OFF Threshold (w/Respect to INGND) | 0.4 | V | VEN Falling | 3 | |||
| EN ON Threshold (w/Respect to INGND) | 0.6 | V | VEN Rising | 3 | |||
| Thermal Shutdown | 150 | °C | Guaranteed by design (note 5) | 3 | |||
| Thermal Resistance Junction-to-Case | θJC | 38 | °C/W | SOIC14, measured on JESD51-7, 4-layer PCB | 2 |
CAD (KiCad official)
- Symbol:
MP2483DS-LF-Z - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mp2483ds-lf-z-etched.step/mp2483ds-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2483ds-lf-z.step/mp2483ds-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (15 pp, sha256
2b9bd98f97890ebc, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).