main
History Download
Ray Publish 0.1.0 0dedbb2

MP2228GJ-Z

Monolithic Power Systems · DC-DC Converters · TSOT-23-8

MP2228GJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AAM input Advanced Asynchronous Modulation pin; connect the tap of a resistor divider to force non-synchronous mode under light loads, and drive it high (VCC) to force CCM.
2 IN power_in Supply voltage pin powering the internal MOSFETs and regulator, operating from a +6V to +16V input rail with a low-ESR, low-inductance input capacitor placed close to the pin.
3 SW output Switch output connected to the inductor and bootstrap capacitor, driven up to VIN during the PWM ON time and pulled negative during OFF time by the low-side switch and body diode.
4 GND power_in System ground and reference ground of the regulated output voltage, requiring careful PCB layout with copper and vias connected to it.
5 BST passive Bootstrap pin requiring a capacitor connected between SW and BST to form a floating supply across the high-side switch driver.
6 SS passive Soft-start pin; an external capacitor connected here programs the soft-start time of the switch mode regulator.
7 VCC power_out Internal 5V LDO output powering the driver and control circuits, to be decoupled with a 0.1µF to 0.22µF capacitor and not with a capacitor of 0.22µF or larger.
8 FB input Feedback input connected to the tap of an external resistor divider from output to GND; the fold-back comparator lowers the oscillator frequency when FB is below 400mV.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (Quiescent) Iq 0.55 0.8 mA VFB = 1V, VAAM=0.5V 3
Supply Current (Quiescent) Iq 0.75 1 mA VFB = 1V, VAAM=5V 3
HS Switch-On Resistance HSRDS-ON 100 mΩ VBST-SW=5V 3
LS Switch-On Resistance LSRDS-ON 40 mΩ VCC =5V 3
Switch Leakage Current SWLKG 0.1 μA VSW =12V 3
Current Limit ILIMIT 3 4.5 A Under 40% Duty Cycle 3
Oscillator Frequency fSW 660 800 940 kHz VFB=0.75V 3
Fold-Back Frequency fFB 0.25 fSW VFB<400mV 3
Maximum Duty Cycle DMAX 90 95 % VFB=700mV 3
Minimum On Time τON_MIN 40 ns 3
Feedback Voltage VFB 791 807 823 mV TA =25°C 3
Feedback Current IFB 10 50 nA VFB=820mV 3
VIN Under-Voltage Lockout Threshold, Rising INUVVth 4.9 5.3 5.85 V 3
VIN Under-Voltage Lockout Threshold, Hysteresis INUVHYS 1.1 V 3
VCC Regulator VCC 4.75 4.9 5.05 V 3
VCC Load Regulation 3 % ICC=5mA 3
Soft-Start Current ISS 7.6 10.5 13.4 μA 3
Thermal Shutdown 150 °C 3
Thermal Hysteresis 20 °C 3
VIN Supply Voltage (absolute maximum) VIN -0.3 17 V 2
VSW Switch Node Voltage (absolute maximum) VSW -0.3 17 V 2
VSW Switch Node Voltage (transient) VSW -5 19 V <10ns 2
All Other Pins Voltage -0.3 6 V 2
Continuous Power Dissipation PD 1.25 W TA = +25°C 2
Junction Temperature TJ 150 °C 2
Storage Temperature TSTORE -65 150 °C 2
Supply Voltage VIN 6 16 V 2
Output Voltage VOUT 0.8 V Maximum VIN x 90% 2
Operating Junction Temperature TJ -40 125 °C 2
Thermal Resistance Junction-to-Ambient θJA 100 °C/W TSOT-23-8, JESD51-7, 4-layer PCB 2
Thermal Resistance Junction-to-Case θJC 55 °C/W TSOT-23-8, JESD51-7, 4-layer PCB 2

CAD (KiCad official)

  • Symbol: MP2228GJ-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mp2228gj-z-etched.step / mp2228gj-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp2228gj-z.step / mp2228gj-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (16 pp, sha256 3cf64288eda526ea, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF