Generated by kicad-footprint-generator · KiCad file format 20260206
MP2228GJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MP2228GJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AAM | input | Advanced Asynchronous Modulation pin; connect the tap of a resistor divider to force non-synchronous mode under light loads, and drive it high (VCC) to force CCM. |
| 2 | IN | power_in | Supply voltage pin powering the internal MOSFETs and regulator, operating from a +6V to +16V input rail with a low-ESR, low-inductance input capacitor placed close to the pin. |
| 3 | SW | output | Switch output connected to the inductor and bootstrap capacitor, driven up to VIN during the PWM ON time and pulled negative during OFF time by the low-side switch and body diode. |
| 4 | GND | power_in | System ground and reference ground of the regulated output voltage, requiring careful PCB layout with copper and vias connected to it. |
| 5 | BST | passive | Bootstrap pin requiring a capacitor connected between SW and BST to form a floating supply across the high-side switch driver. |
| 6 | SS | passive | Soft-start pin; an external capacitor connected here programs the soft-start time of the switch mode regulator. |
| 7 | VCC | power_out | Internal 5V LDO output powering the driver and control circuits, to be decoupled with a 0.1µF to 0.22µF capacitor and not with a capacitor of 0.22µF or larger. |
| 8 | FB | input | Feedback input connected to the tap of an external resistor divider from output to GND; the fold-back comparator lowers the oscillator frequency when FB is below 400mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (Quiescent) | Iq | 0.55 | 0.8 | mA | VFB = 1V, VAAM=0.5V | 3 | |
| Supply Current (Quiescent) | Iq | 0.75 | 1 | mA | VFB = 1V, VAAM=5V | 3 | |
| HS Switch-On Resistance | HSRDS-ON | 100 | mΩ | VBST-SW=5V | 3 | ||
| LS Switch-On Resistance | LSRDS-ON | 40 | mΩ | VCC =5V | 3 | ||
| Switch Leakage Current | SWLKG | 0.1 | μA | VSW =12V | 3 | ||
| Current Limit | ILIMIT | 3 | 4.5 | A | Under 40% Duty Cycle | 3 | |
| Oscillator Frequency | fSW | 660 | 800 | 940 | kHz | VFB=0.75V | 3 |
| Fold-Back Frequency | fFB | 0.25 | fSW | VFB<400mV | 3 | ||
| Maximum Duty Cycle | DMAX | 90 | 95 | % | VFB=700mV | 3 | |
| Minimum On Time | τON_MIN | 40 | ns | 3 | |||
| Feedback Voltage | VFB | 791 | 807 | 823 | mV | TA =25°C | 3 |
| Feedback Current | IFB | 10 | 50 | nA | VFB=820mV | 3 | |
| VIN Under-Voltage Lockout Threshold, Rising | INUVVth | 4.9 | 5.3 | 5.85 | V | 3 | |
| VIN Under-Voltage Lockout Threshold, Hysteresis | INUVHYS | 1.1 | V | 3 | |||
| VCC Regulator | VCC | 4.75 | 4.9 | 5.05 | V | 3 | |
| VCC Load Regulation | 3 | % | ICC=5mA | 3 | |||
| Soft-Start Current | ISS | 7.6 | 10.5 | 13.4 | μA | 3 | |
| Thermal Shutdown | 150 | °C | 3 | ||||
| Thermal Hysteresis | 20 | °C | 3 | ||||
| VIN Supply Voltage (absolute maximum) | VIN | -0.3 | 17 | V | 2 | ||
| VSW Switch Node Voltage (absolute maximum) | VSW | -0.3 | 17 | V | 2 | ||
| VSW Switch Node Voltage (transient) | VSW | -5 | 19 | V | <10ns | 2 | |
| All Other Pins Voltage | -0.3 | 6 | V | 2 | |||
| Continuous Power Dissipation | PD | 1.25 | W | TA = +25°C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TSTORE | -65 | 150 | °C | 2 | ||
| Supply Voltage | VIN | 6 | 16 | V | 2 | ||
| Output Voltage | VOUT | 0.8 | V | Maximum VIN x 90% | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 100 | °C/W | TSOT-23-8, JESD51-7, 4-layer PCB | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 55 | °C/W | TSOT-23-8, JESD51-7, 4-layer PCB | 2 |
CAD (KiCad official)
- Symbol:
MP2228GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mp2228gj-z-etched.step/mp2228gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2228gj-z.step/mp2228gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (16 pp, sha256
3cf64288eda526ea, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).