Generated by kicad-footprint-generator · KiCad file format 20260206
MP2151GTF-Z
Monolithic Power Systems · DC-DC Converters · SOT-563
MP2151GTF-Z from Monolithic Power Systems, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground for the converter. |
| 2 | SW | output | Output switching node and drain of the internal high-side P-channel MOSFET; connect the inductor to SW to complete the converter. |
| 3 | VIN | power_in | Supply input for the regulator, operating from +2.5V to +5.5V (unregulated), and must be decoupled with a capacitor to prevent large voltage spikes at the input. |
| 4 | EN | input | On/off control: the device is enabled when EN is pulled above 1.2V and disabled when EN is low (0.4V max) or left floating, with an internal 1MΩ resistor to ground. |
| 5 | FB | input | Feedback input for the adjustable version; an external resistor divider from the output to GND tapped at FB sets the output voltage, which can be regulated as low as 0.6V. |
| 6 | OUT | power_out | Output voltage rail and sense input for the output voltage; connect the load to OUT and use an output capacitor to reduce output ripple. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOT-563 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN range | 2.5 | 5.5 | V | 5 | |||
| Feedback voltage | VFB | 594 | 600 | 606 | mV | TJ = 25°C | 5 |
| Feedback voltage | VFB | 591 | 600 | 609 | mV | TJ = -40°C to +125°C | 5 |
| Under-voltage lockout threshold rising | 2.3 | 2.45 | V | threshold rising | 5 | ||
| Under-voltage lockout threshold hysteresis | 200 | mV | 5 | ||||
| Output over-voltage threshold | VOVP | 110 | 115 | 120 | % VFB | 6 | |
| Feedback current | IFB | 50 | 100 | nA | VFB = 0.63V | 5 | |
| ON time | TON | 180 | 220 | 260 | ns | VIN = 5V, VOUT = 1.2V | 5 |
| ON time | TON | 240 | 300 | 360 | ns | VIN = 3.6V, VOUT = 1.2V | 5 |
| Supply current (quiescent) (MP2151XX, adjustable) | IQ | 25 | 30 | μA | VEN = 2V, VFB = 0.63V, VIN = 5V, TJ = +25°C | 6 | |
| Supply current (shutdown) | 0 | 1 | μA | VEN = 0V, TJ = +25°C | 6 | ||
| Switch leakage | 0 | 1 | μA | VEN = 0V, VIN = 6V, VSW = 0V and 6V, TJ = +25°C | 5 | ||
| Supply voltage (VIN) absolute maximum | VIN | 6.5 | V | 4 | |||
| VSW | VSW | -0.3 | 6.5 | V | Transient under 10ns: -5V min, 10V max | 4 | |
| All other pins | -0.3 | 6.5 | V | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Lead temperature | 260 | °C | 4 | ||||
| Continuous power dissipation | 1.5 | W | TA = +25°C, SOT563 | 4 | |||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Supply voltage (VIN) recommended | VIN | 2.5 | 5.5 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| P-FET switch on resistance | RDSON_P | 80 | mΩ | VIN = 5V | 5 | ||
| N-FET switch on resistance | RDSON_N | 50 | mΩ | VIN = 5V | 5 | ||
| P-FET peak current limit | 1.8 | A | 5 | ||||
| ZCD | 50 | mA | 5 | ||||
| Switching frequency | fs | 1100 | kHz | VOUT = 1.2V | 5 | ||
| Minimum off time | TMIN-OFF | 100 | ns | 5 | |||
| Minimum on time | TMIN-ON | 60 | ns | 5 | |||
| Soft-start time | TSS-ON | 0.5 | ms | VOUT rise from 10% to 90% | 5 | ||
| Maximum duty cycle | 100 | % | 5 | ||||
| EN turn on delay | 150 | us | EN on to SW active | 6 | |||
| EN input logic low voltage | 0.4 | V | 6 | ||||
| EN input logic high voltage | 1.2 | V | 6 | ||||
| Output discharge resistor | RDIS | 200 | Ω | VEN = 0V, VOUT = 1.2V | 6 | ||
| EN input current | 1.2 | μA | VEN = 2V | 6 | |||
| EN input current | 0 | μA | VEN = 0V | 6 | |||
| OVP delay | 12 | us | 6 | ||||
| Vo OVP hysteresis | VOVP_HYS | 10 | % VFB | 6 | |||
| Low-side current | 1.5 | A | Current flow from SW to GND | 6 | |||
| Absolute VIN OVP | 6.1 | V | After Vo OVP enable | 6 | |||
| Absolute VIN OVP hysteresis | 400 | mV | 6 | ||||
| Thermal shutdown | 160 | °C | Guaranteed by over-temperature correlation, not tested in production (note 7) | 6 | |||
| Thermal hysteresis | 30 | °C | Guaranteed by over-temperature correlation, not tested in production (note 7) | 6 | |||
| Thermal resistance junction-to-ambient | θJA | 80 | °C/W | EV2151-TF-00A, 2-layer PCB, 63mmx63mm | 4 | ||
| Thermal resistance junction-to-case | θJC | 50 | °C/W | EV2151-TF-00A, 2-layer PCB, 63mmx63mm | 4 | ||
| Thermal resistance junction-to-ambient | θJA | 130 | °C/W | JESD51-7, 4-layer PCB | 4 | ||
| Thermal resistance junction-to-case | θJC | 60 | °C/W | JESD51-7, 4-layer PCB | 4 |
CAD (KiCad official)
- Symbol:
MP2151GTF-Z - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
mp2151gtf-z-etched.step/mp2151gtf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2151gtf-z.step/mp2151gtf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (21 pp, sha256
954e5859635278f7, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).