Generated by kicad-footprint-generator · KiCad file format 20260206
MP20073DH-LF-Z
Monolithic Power Systems · Linear Voltage Regulators (LDO) · MSOP-8-EP
MP20073DH-LF-Z from Monolithic Power Systems, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DDQ | power_in | Power input for the VTT regulator, normally connected to the DDR VDDQ rail and bypassed to GND with a 10µF ceramic capacitor; VDDQ is rated 1.3V to 6.0V. |
| 2 | VTT | power_out | Power output of the VTT LDO, a 2A sink/source tracking termination regulator. |
| 3 | GND | power_in | Ground pin; the GND pin and the exposed pad must be connected to the same ground plane. |
| 4 | VTTSEN | input | Kelvin sensed feedback input for VTT, to be connected to the VTT regulation point by a direct sense trace. |
| 5 | VDRV | power_in | Chip bias voltage with 3.3V drive (recommended operating range 3.3V to 5V); a 1.0µF to 4.7µF ceramic capacitor should be placed close to this pin. |
| 6 | REF | input | LDO signal input used to generate the VDDQ/2 reference that VTT and VTTREF track. |
| 7 | EN | input | VTT regulator enable input; high enables the chip, with VEN high threshold minimum 1.4V and low threshold maximum 0.5V. |
| 8 | VTTREF | output | Buffered output tracking VREF/2 for the DDR memory receiver input comparators, with source current capability of up to 15mA. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | MSOP-8-EP |
| Category | Power Management |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDRV Operating Voltage | VDRV | 3.3 | 5 | V | 3 | ||
| VDRV Shut down current | IDRV_SD | 0.2 | 1 | A | VDRV =3.3 V, VDDQ=0V | 3 | |
| VDRV Operation Current | IDRV | 1.3 | 3 | mA | VEN_H, VTT=0.75V | 3 | |
| VDDQ UVLO Upper Threshold | VDDQUV+ | 0.9 | 1.3 | V | Rising Edge; hysteresis = 55mV | 3 | |
| VTT with Respect to 1/2VREF (sink) | dVTT0 | -30 | 30 | mV | 1/2VREF, VTT, VREF = 1.8V, IVTT = 0 to 2A (Sink Current) | 3 | |
| VTT with Respect to 1/2VREF (source) | dVTT0 | -30 | 30 | mV | 1/2VREF, VTT, VREF = 1.8V, IVTT = 0 to 2A (Source Current) | 3 | |
| VTTREF Source Current | IVTTR | 10 | mA | VREF = 1.8 V or 1.5 V | 3 | ||
| VTTREF Accuracy Referred to 1/2VREF (VREF = 1.8 V) | dVTTR | -18 | 18 | mV | 1/2VREF, VTTR, VREF = 1.8 V, IVTTR = 0 mA to 10 mA | 3 | |
| VTTREF Accuracy Referred to 1/2VREF (VREF = 1.5 V) | dVTTR | -15 | 15 | mV | 1/2VREF, VTTR, VREF = 1.5 V, IVTTR = 0 mA to 10 mA | 3 | |
| VEN Pin Threshold High | VEN_H | 1.4 | V | 3 | |||
| VEN Pin Threshold Low | VEN_L | 0.5 | V | 3 | |||
| VEN Pin Input Current | IIN_VEN | 1 | A | VEN = 3.3 V | 3 | ||
| Drive Voltage VDRV (recommended) | VDRV | 3.3 | 5 | V | 2 | ||
| Operating Junction Temperature (recommended) | TJ | -40 | 125 | °C | 2 | ||
| Supply Voltage VDDQ | VDDQ | -0.3 | 6 | V | 2 | ||
| Drive Voltage VDRV | VDRV | -0.3 | 6 | V | 2 | ||
| All Other Pins | -0.3 | 6 | V | 2 | |||
| Continuous Power Dissipation | 1.56 | W | TA = +25°C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature | -50 | 150 | °C | 2 | |||
| Thermal Resistance junction-to-ambient (MSOP8E) | θJA | 80 | °C/W | 2 | |||
| Thermal Resistance junction-to-case (MSOP8E) | θJC | 12 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
MP20073DH-LF-Z - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
mp20073dh-lf-z-etched.step/mp20073dh-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp20073dh-lf-z.step/mp20073dh-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (11 pp, sha256
d4e4ed398e840ef3, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).