Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP20073DH-LF-Z

Monolithic Power Systems · Linear Voltage Regulators (LDO) · MSOP-8-EP

MP20073DH-LF-Z from Monolithic Power Systems, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DDQ power_in Power input for the VTT regulator, normally connected to the DDR VDDQ rail and bypassed to GND with a 10µF ceramic capacitor; VDDQ is rated 1.3V to 6.0V.
2 VTT power_out Power output of the VTT LDO, a 2A sink/source tracking termination regulator.
3 GND power_in Ground pin; the GND pin and the exposed pad must be connected to the same ground plane.
4 VTTSEN input Kelvin sensed feedback input for VTT, to be connected to the VTT regulation point by a direct sense trace.
5 VDRV power_in Chip bias voltage with 3.3V drive (recommended operating range 3.3V to 5V); a 1.0µF to 4.7µF ceramic capacitor should be placed close to this pin.
6 REF input LDO signal input used to generate the VDDQ/2 reference that VTT and VTTREF track.
7 EN input VTT regulator enable input; high enables the chip, with VEN high threshold minimum 1.4V and low threshold maximum 0.5V.
8 VTTREF output Buffered output tracking VREF/2 for the DDR memory receiver input comparators, with source current capability of up to 15mA.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package MSOP-8-EP
Category Power Management
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDRV Operating Voltage VDRV 3.3 5 V 3
VDRV Shut down current IDRV_SD 0.2 1 A VDRV =3.3 V, VDDQ=0V 3
VDRV Operation Current IDRV 1.3 3 mA VEN_H, VTT=0.75V 3
VDDQ UVLO Upper Threshold VDDQUV+ 0.9 1.3 V Rising Edge; hysteresis = 55mV 3
VTT with Respect to 1/2VREF (sink) dVTT0 -30 30 mV 1/2VREF, VTT, VREF = 1.8V, IVTT = 0 to 2A (Sink Current) 3
VTT with Respect to 1/2VREF (source) dVTT0 -30 30 mV 1/2VREF, VTT, VREF = 1.8V, IVTT = 0 to 2A (Source Current) 3
VTTREF Source Current IVTTR 10 mA VREF = 1.8 V or 1.5 V 3
VTTREF Accuracy Referred to 1/2VREF (VREF = 1.8 V) dVTTR -18 18 mV 1/2VREF, VTTR, VREF = 1.8 V, IVTTR = 0 mA to 10 mA 3
VTTREF Accuracy Referred to 1/2VREF (VREF = 1.5 V) dVTTR -15 15 mV 1/2VREF, VTTR, VREF = 1.5 V, IVTTR = 0 mA to 10 mA 3
VEN Pin Threshold High VEN_H 1.4 V 3
VEN Pin Threshold Low VEN_L 0.5 V 3
VEN Pin Input Current IIN_VEN 1 A VEN = 3.3 V 3
Drive Voltage VDRV (recommended) VDRV 3.3 5 V 2
Operating Junction Temperature (recommended) TJ -40 125 °C 2
Supply Voltage VDDQ VDDQ -0.3 6 V 2
Drive Voltage VDRV VDRV -0.3 6 V 2
All Other Pins -0.3 6 V 2
Continuous Power Dissipation 1.56 W TA = +25°C 2
Junction Temperature 150 °C 2
Storage Temperature -50 150 °C 2
Thermal Resistance junction-to-ambient (MSOP8E) θJA 80 °C/W 2
Thermal Resistance junction-to-case (MSOP8E) θJC 12 °C/W 2

CAD (KiCad official)

  • Symbol: MP20073DH-LF-Z
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: mp20073dh-lf-z-etched.step / mp20073dh-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp20073dh-lf-z.step / mp20073dh-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (11 pp, sha256 d4e4ed398e840ef3, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF