main
Ray
Publish 0.1.0
c326cb0
MP20048DJ-LF-Z
Monolithic Power Systems · Linear Voltage Regulators (LDO) · TSOT-23-5
MP20048DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input with supply voltage range of +1.7V to 5.5V. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Positive polarity enable input; high turns the device on, low turns the output off, and it should not be left floating (tie to VIN if shutdown is not needed). |
| 4 | FB | input | Feedback input for setting the output voltage via a resistor divider, with a feedback threshold voltage of 1.234V. |
| 5 | OUT | power_out | Regulator output, which is stable without an output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 1.7 | 5.5 | V | 3 | ||
| Internal reference | VFB | 1.221 | 1.234 | 1.247 | V | 3 | |
| VFB Accuracy | VFB | -1 | 1 | % | TA=25℃ | 3 | |
| Output current limit | ICL | 270 | 450 | mA | VOUT=0.9×VOUT(nom) | 3 | |
| Ground pin current | IGND | 500 | 800 | μA | IOUT=100mA | 3 | |
| Shutdown current | ISHDN | 0.01 | 1 | μA | VEN≤0.5V,VOUT≤VIN≤5.5V | 3 | |
| Output leakage | ILEAK | 6.5 | μA | VEN≤0.5V,VOUT≤VIN≤5.5V, -40℃≤TJ≤+125℃ | 3 | ||
| Enable high (enabled) | VEN(HI) | 1.7 | V | max is VIN | 3 | ||
| Enable low (shutdown) | VEN(LO) | 0 | 0.5 | V | 3 | ||
| Operating junction temperature | TJ | 125 | ℃ | 3 | |||
| Line regulation | ΔVOUT%/ΔVIN | 0.01 | %/V | 1.7V≤VIN≤5.5V | 3 | ||
| Load regulation | ΔVOUT%/ΔIOUT | 0.0005 | %/mA | 1mA≤IOUT≤250mA | 3 | ||
| Dropout voltage | VDO | 62.5 | mV | IOUT=250mA | 3 | ||
| Output impedance in dropout | ZO(DO) | 0.25 | Ω | 1.7V≤VIN≤5.5V | 3 | ||
| Short-circuit current | ISC | 430 | mA | VOUT=0V | 3 | ||
| Ground pin current | IGND | 350 | μA | IOUT=10mA | 3 | ||
| Startup time | tSTR | 0.5 | ms | VOUT=2.5V, RL=25Ω,C2=1μF | 3 | ||
| Thermal shutdown temperature, increasing | TSD | 140 | ℃ | Temp increasing | 3 | ||
| Thermal shutdown reset, decreasing | TSD | 130 | ℃ | Temp decreasing | 3 | ||
| Supply Input Voltage | VIN | 6 | V | 2 | |||
| Power Dissipation | PD | 0.45 | W | TA=25°C | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| ESD HBM | 2 | kV | Human Body Mode | 2 | |||
| ESD MM | 500 | V | Machine Mode | 2 | |||
| Recommended Supply Input Voltage | VIN | 1.7 | 5.5 | V | 2 | ||
| Recommended Enable Input Voltage | VEN | 0 | 5.5 | V | 2 | ||
| Recommended Junction Temperature | TJ | 125 | °C | 2 | |||
| Free Air Temperature | TA | -40 | 85 | °C | 2 | ||
| Thermal resistance junction-ambient | θJA | 220 | °C/W | TSOT23-5, JESD51-7 4-layer board | 2 | ||
| Thermal resistance junction-case | θJC | 110 | °C/W | TSOT23-5, JESD51-7 4-layer board | 2 | ||
| PSRR | PSRR | 48 | dB | IOUT=250mA, f=100Hz | 3 | ||
| PSRR | PSRR | 23 | dB | IOUT=250mA, f=10kHz | 3 | ||
| Output noise voltage | VN | 48 | μVRMS | BW=10Hz, 100kHz, C2=10μF, No C3 | 3 | ||
| Output noise voltage | VN | 37 | μVRMS | BW=10Hz, 100kHz, C2=10μF, C3=0.01μF | 3 |
CAD (KiCad official)
- Symbol:
MP20048DJ-LF-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mp20048dj-lf-z-etched.step/mp20048dj-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp20048dj-lf-z.step/mp20048dj-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (10 pp, sha256
746cd0b55d8afb02, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP20048DJ-LF-Z
**Monolithic Power Systems** · Linear Voltage Regulators (LDO) · TSOT-23-5
MP20048DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input with supply voltage range of +1.7V to 5.5V. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Positive polarity enable input; high turns the device on, low turns the output off, and it should not be left floating (tie to VIN if shutdown is not needed). |
| 4 | FB | input | Feedback input for setting the output voltage via a resistor divider, with a feedback threshold voltage of 1.234V. |
| 5 | OUT | power_out | Regulator output, which is stable without an output capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-5 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 1.7 | | 5.5 | V | | 3 |
| Internal reference | VFB | 1.221 | 1.234 | 1.247 | V | | 3 |
| VFB Accuracy | VFB | -1 | | 1 | % | TA=25℃ | 3 |
| Output current limit | ICL | 270 | | 450 | mA | VOUT=0.9×VOUT(nom) | 3 |
| Ground pin current | IGND | | 500 | 800 | μA | IOUT=100mA | 3 |
| Shutdown current | ISHDN | | 0.01 | 1 | μA | VEN≤0.5V,VOUT≤VIN≤5.5V | 3 |
| Output leakage | ILEAK | | | 6.5 | μA | VEN≤0.5V,VOUT≤VIN≤5.5V, -40℃≤TJ≤+125℃ | 3 |
| Enable high (enabled) | VEN(HI) | 1.7 | | | V | max is VIN | 3 |
| Enable low (shutdown) | VEN(LO) | 0 | | 0.5 | V | | 3 |
| Operating junction temperature | TJ | | | 125 | ℃ | | 3 |
| Line regulation | ΔVOUT%/ΔVIN | | 0.01 | | %/V | 1.7V≤VIN≤5.5V | 3 |
| Load regulation | ΔVOUT%/ΔIOUT | | 0.0005 | | %/mA | 1mA≤IOUT≤250mA | 3 |
| Dropout voltage | VDO | | 62.5 | | mV | IOUT=250mA | 3 |
| Output impedance in dropout | ZO(DO) | | 0.25 | | Ω | 1.7V≤VIN≤5.5V | 3 |
| Short-circuit current | ISC | | 430 | | mA | VOUT=0V | 3 |
| Ground pin current | IGND | | 350 | | μA | IOUT=10mA | 3 |
| Startup time | tSTR | | 0.5 | | ms | VOUT=2.5V, RL=25Ω,C2=1μF | 3 |
| Thermal shutdown temperature, increasing | TSD | | 140 | | ℃ | Temp increasing | 3 |
| Thermal shutdown reset, decreasing | TSD | | 130 | | ℃ | Temp decreasing | 3 |
| Supply Input Voltage | VIN | | | 6 | V | | 2 |
| Power Dissipation | PD | | | 0.45 | W | TA=25°C | 2 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| ESD HBM | | | | 2 | kV | Human Body Mode | 2 |
| ESD MM | | | | 500 | V | Machine Mode | 2 |
| Recommended Supply Input Voltage | VIN | 1.7 | | 5.5 | V | | 2 |
| Recommended Enable Input Voltage | VEN | 0 | | 5.5 | V | | 2 |
| Recommended Junction Temperature | TJ | | | 125 | °C | | 2 |
| Free Air Temperature | TA | -40 | | 85 | °C | | 2 |
| Thermal resistance junction-ambient | θJA | | 220 | | °C/W | TSOT23-5, JESD51-7 4-layer board | 2 |
| Thermal resistance junction-case | θJC | | 110 | | °C/W | TSOT23-5, JESD51-7 4-layer board | 2 |
| PSRR | PSRR | | 48 | | dB | IOUT=250mA, f=100Hz | 3 |
| PSRR | PSRR | | 23 | | dB | IOUT=250mA, f=10kHz | 3 |
| Output noise voltage | VN | | 48 | | μVRMS | BW=10Hz, 100kHz, C2=10μF, No C3 | 3 |
| Output noise voltage | VN | | 37 | | μVRMS | BW=10Hz, 100kHz, C2=10μF, C3=0.01μF | 3 |
## CAD (KiCad official)
- Symbol: `MP20048DJ-LF-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mp20048dj-lf-z-etched.step` / `mp20048dj-lf-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp20048dj-lf-z.step` / `mp20048dj-lf-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mp20048dj-lf-z-datasheet.pdf) (10 pp, sha256 `746cd0b55d8afb02`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp20048dj-lf-z-datasheet.pdf)