main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp20048dj-lf-z: viewers · Ray
mp20048dj-lf-z-etched.glb Publish 0.1.0 · Ray
mp20048dj-lf-z-etched.step mp20048dj-lf-z: factory component page (tier=lcsc) · Ray
mp20048dj-lf-z-hero.glb mp20048dj-lf-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp20048dj-lf-z-hero.overlay.json Publish 0.1.0 · Ray
mp20048dj-lf-z.glb Publish 0.1.0 · Ray
mp20048dj-lf-z.kicad_mod Publish 0.1.0 · Ray
mp20048dj-lf-z.kicad_sym Publish 0.1.0 · Ray
mp20048dj-lf-z.lbr Publish 0.1.0 · Ray
mp20048dj-lf-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

MP20048DJ-LF-Z

Monolithic Power Systems · Linear Voltage Regulators (LDO) · TSOT-23-5

MP20048DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Regulator input with supply voltage range of +1.7V to 5.5V.
2 GND power_in Ground.
3 EN input Positive polarity enable input; high turns the device on, low turns the output off, and it should not be left floating (tie to VIN if shutdown is not needed).
4 FB input Feedback input for setting the output voltage via a resistor divider, with a feedback threshold voltage of 1.234V.
5 OUT power_out Regulator output, which is stable without an output capacitor.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 1.7 5.5 V 3
Internal reference VFB 1.221 1.234 1.247 V 3
VFB Accuracy VFB -1 1 % TA=25℃ 3
Output current limit ICL 270 450 mA VOUT=0.9×VOUT(nom) 3
Ground pin current IGND 500 800 μA IOUT=100mA 3
Shutdown current ISHDN 0.01 1 μA VEN≤0.5V,VOUT≤VIN≤5.5V 3
Output leakage ILEAK 6.5 μA VEN≤0.5V,VOUT≤VIN≤5.5V, -40℃≤TJ≤+125℃ 3
Enable high (enabled) VEN(HI) 1.7 V max is VIN 3
Enable low (shutdown) VEN(LO) 0 0.5 V 3
Operating junction temperature TJ 125 ℃ 3
Line regulation ΔVOUT%/ΔVIN 0.01 %/V 1.7V≤VIN≤5.5V 3
Load regulation ΔVOUT%/ΔIOUT 0.0005 %/mA 1mA≤IOUT≤250mA 3
Dropout voltage VDO 62.5 mV IOUT=250mA 3
Output impedance in dropout ZO(DO) 0.25 Ω 1.7V≤VIN≤5.5V 3
Short-circuit current ISC 430 mA VOUT=0V 3
Ground pin current IGND 350 μA IOUT=10mA 3
Startup time tSTR 0.5 ms VOUT=2.5V, RL=25Ω,C2=1μF 3
Thermal shutdown temperature, increasing TSD 140 ℃ Temp increasing 3
Thermal shutdown reset, decreasing TSD 130 ℃ Temp decreasing 3
Supply Input Voltage VIN 6 V 2
Power Dissipation PD 0.45 W TA=25°C 2
Operating Junction Temperature TJ -40 125 °C 2
Storage Temperature Range TSTG -65 150 °C 2
ESD HBM 2 kV Human Body Mode 2
ESD MM 500 V Machine Mode 2
Recommended Supply Input Voltage VIN 1.7 5.5 V 2
Recommended Enable Input Voltage VEN 0 5.5 V 2
Recommended Junction Temperature TJ 125 °C 2
Free Air Temperature TA -40 85 °C 2
Thermal resistance junction-ambient θJA 220 °C/W TSOT23-5, JESD51-7 4-layer board 2
Thermal resistance junction-case θJC 110 °C/W TSOT23-5, JESD51-7 4-layer board 2
PSRR PSRR 48 dB IOUT=250mA, f=100Hz 3
PSRR PSRR 23 dB IOUT=250mA, f=10kHz 3
Output noise voltage VN 48 μVRMS BW=10Hz, 100kHz, C2=10μF, No C3 3
Output noise voltage VN 37 μVRMS BW=10Hz, 100kHz, C2=10μF, C3=0.01μF 3

CAD (KiCad official)

  • Symbol: MP20048DJ-LF-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mp20048dj-lf-z-etched.step / mp20048dj-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp20048dj-lf-z.step / mp20048dj-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (10 pp, sha256 746cd0b55d8afb02, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF