component
MP1482DS-LF-Z
Public Made by Adomby adom
Monolithic Power Systems DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| mp1482ds-lf-z-etched.glb | 17d ago |
| mp1482ds-lf-z-etched.step | 17d ago |
| mp1482ds-lf-z-hero.glb | 17d ago |
| mp1482ds-lf-z-hero.overlay.json | 17d ago |
| mp1482ds-lf-z.glb | 17d ago |
| mp1482ds-lf-z.kicad_mod | 17d ago |
| mp1482ds-lf-z.kicad_sym | 17d ago |
| mp1482ds-lf-z.lbr | 17d ago |
| mp1482ds-lf-z.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
MP1482DS-LF-Z
Monolithic Power Systems · DC-DC Converters · SOIC-8
MP1482DS-LF-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_in | High-side gate drive boost input; connect a 0.01µF or greater capacitor from SW to BS to power the high-side switch. |
| 2 | IN | power_in | Power input that supplies the IC and the step-down switches; drive it with a 4.75V to 18V source and bypass it to GND with a suitably large capacitor. |
| 3 | SW | output | Power switching output node that supplies the output through the LC filter; a capacitor is required from SW to BS to power the high-side switch. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | FB | input | Feedback input that senses the output voltage through a resistive divider; the feedback threshold is 0.923V. |
| 6 | COMP | passive | Compensation node for the control loop; connect a series RC network from COMP to GND, with an additional capacitor from COMP to GND in some cases. |
| 7 | EN | input | Digital enable input that turns the regulator on when driven high and off when driven low; pull up with a 100kΩ resistor for automatic startup. |
| 8 | SS | passive | Soft-start control input; a capacitor from SS to GND sets the soft-start period (0.1µF gives 15ms), and leaving SS unconnected disables soft-start. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown Supply Current | 1 | 3 | μA | VEN = 0V | 3 | ||
| Supply Current | 1.3 | 1.5 | mA | VEN = 2.0V; VFB = 1.0V | 3 | ||
| Feedback Voltage | VFB | 0.9 | 0.923 | 0.946 | V | 4.75V ≤ VIN ≤ 18V | 3 |
| Upper Switch Current Limit Minimum Duty Cycle | 2.4 | 3.4 | A | 3 | |||
| Oscillation Frequency | Fosc1 | 305 | 340 | 375 | kHz | 3 | |
| EN Shutdown Threshold Voltage | VEN | 1.1 | 1.5 | 2 | V | VEN Rising | 3 |
| EN Lockout Threshold Voltage | 2.2 | 2.5 | 2.7 | V | 3 | ||
| Input Under Voltage Lockout Threshold | 3.8 | 4.1 | 4.4 | V | VIN Rising | 3 | |
| Input Voltage | VIN | -0.3 | 20 | V | Supply Voltage | 2 | |
| Switch Node Voltage | VSW | 21 | V | 2 | |||
| Boost Voltage | VBS | -0.3 | 6 | V | Referenced to VSW: VSW, 0.3V to VSW + 6V | 2 | |
| All Other Pins | -0.3 | 6 | V | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Input Voltage | VIN | 4.75 | 18 | V | 2 | ||
| Output Voltage | VOUT | 0.923 | 15 | V | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Feedback Overvoltage Threshold | 1.1 | V | 3 | ||||
| Error Amplifier Voltage Gain | AEA | 400 | V/V | 3 | |||
| Error Amplifier Transconductance | GEA | 800 | μA/V | IC = 10μA | 3 | ||
| High-Side Switch On Resistance | RDS(ON)1 | 130 | mΩ | 3 | |||
| Low-Side Switch On Resistance | RDS(ON)2 | 130 | mΩ | 3 | |||
| High-Side Switch Leakage Current | 10 | μA | VEN = 0V, VSW = 0V | 3 | |||
| Lower Switch Current Limit | 1.1 | A | From Drain to Source | 3 | |||
| COMP to Current Sense Transconductance | GCS | 3.5 | A/V | 3 | |||
| Short Circuit Oscillation Frequency | Fosc2 | 100 | kHz | VFB = 0V | 3 | ||
| Maximum Duty Cycle | DMAX | 90 | % | VFB = 1.0V | 3 | ||
| Minimum On Time | 220 | ns | 3 | ||||
| EN Shutdown Threshold Voltage Hysteresis | 210 | mV | 3 | ||||
| EN Lockout Threshold Hysteresis | 210 | mV | 3 | ||||
| Input Under Voltage Lockout Threshold Hysteresis | 210 | mV | 3 | ||||
| Soft-Start Current | 6 | μA | VSS = 0V | 3 | |||
| Soft-Start Period | 15 | ms | CSS = 0.1μF | 3 | |||
| Thermal Shutdown | 160 | °C | 3 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 90 | C/W | SOIC8, measured on JESD51-7, 4-layer board | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 45 | C/W | SOIC8, measured on JESD51-7, 4-layer board | 2 |
CAD (KiCad official)
- Symbol:
MP1482DS-LF-Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mp1482ds-lf-z-etched.step/mp1482ds-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp1482ds-lf-z.step/mp1482ds-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (12 pp, sha256
25e37463b8d998ec, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).