main
Ray
moc8101-x017t: CAD wording names the Adom_Gen land, not KiCad official + land_source/land_note from the reviewer decisi…
7392769
MOC8101-X017T
Vishay Intertech · Optocouplers - Phototransistor Output · DIP-6
MOC8101-X017T from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | Anode of the gallium arsenide infrared emitting diode; forward continuous current max 60 mA, reverse voltage max 6.0 V. |
| 2 | C | passive | Cathode of the infrared emitting diode (input side). |
| 3 | NC | unconnected | No internal connection. |
| 4 | E | passive | Emitter of the silicon phototransistor output; emitter-collector breakdown voltage BVECO min 7.0 V. |
| 5 | C | passive | Collector of the silicon phototransistor output; collector-emitter breakdown voltage BVCEO min 30 V, collector current max 50 mA. |
| 6 | B | unconnected | Phototransistor base terminal, not connected internally, which improves common mode interference immunity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-6 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current transfer ratio | CTR | 50 | 80 | % | VCE = 10 V, IF = 10 mA | 3 | |
| Breakdown voltage | VBR | 6 | V | IR = 10 μA | 2 | ||
| Collector emitter breakdown voltage | BVCEO | 30 | V | IC = 1.0 mA | 2 | ||
| Emitter collector breakdown voltage | BVECO | 7 | V | IE = 100 μA | 2 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 2 | ||
| Operating temperature | Tamb | -55 | 100 | °C | 2 | ||
| Reverse voltage | VR | 6 | V | 2 | |||
| Forward continuous current | IF | 60 | mA | 2 | |||
| Surge forward current | IFSM | 2.5 | A | t ≤ 10 μs | 2 | ||
| Power dissipation (input) | Pdiss | 100 | mW | 2 | |||
| Collector current | IC | 50 | mA | 2 | |||
| Power dissipation (output) | Pdiss | 150 | mW | 2 | |||
| Total power dissipation | Ptot | 250 | mW | 2 | |||
| Junction temperature | Tj | 100 | °C | 2 | |||
| Soldering temperature | Tsld | 260 | °C | max. 10 s, dip soldering; distance to seating plane ≥ 1.5 mm | 2 | ||
| Forward voltage | VF | 1.25 | 1.5 | V | IF = 10 mA | 2 | |
| Reverse current | IR | 0.01 | 10 | μA | VR = 6.0 V | 2 | |
| Collector emitter dark current (MOC8101) | ICEO1 | 1 | 50 | nA | VCE = 10 V, Tamp = 25 °C | 2 | |
| Saturation voltage collector emitter | VCEsat | 0.25 | 0.4 | V | IF = 5.0 mA | 2 | |
| Maximum rated withstanding isolation voltage | VISO | 4420 | VRMS | t = 1 min | 3 | ||
| Maximum transient isolation voltage | VIOTM | 10000 | V | 3 | |||
| Maximum repetitive peak isolation voltage | VIORM | 890 | V | 3 | |||
| Output safety power | PSO | 400 | mW | 3 | |||
| Input safety current | ISI | 275 | mA | 3 | |||
| Input safety temperature | TSI | 175 | °C | 3 | |||
| Capacitance | CO | 25 | pF | VR = 0 V, f = 1.0 MHz | 2 | ||
| Thermal resistance (input) | Rthja | 750 | K/W | 2 | |||
| Collector emitter capacitance | CCE | 5.2 | pF | VCE = 5.0 V, f = 1.0 MHz | 2 | ||
| Thermal resistance (output) | Rthja | 500 | K/W | 2 | |||
| Coupling capacitance | CC | 0.6 | pF | 2 | |||
| Turn-on time | ton | 3 | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 | ||
| Turn-off time | toff | 2.3 | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 | ||
| Rise time | tr | 2 | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 | ||
| Fall time | tf | 2 | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 | ||
| Cut off frequency | fco | 250 | kHz | 3 |
CAD (Adom-generated)
- Symbol:
MOC8101-X017T - Footprint:
Adom_Gen:Vishay_Intertech_MOC8101_0c20f6 - 3D model: generated to fit the land (STEP)
- 3D model files:
moc8101-x017t-etched.step/moc8101-x017t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);moc8101-x017t.step/moc8101-x017t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (7 pp, sha256
f7997876bf7021d4, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30.
# MOC8101-X017T
**Vishay Intertech** · Optocouplers - Phototransistor Output · DIP-6
MOC8101-X017T from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | Anode of the gallium arsenide infrared emitting diode; forward continuous current max 60 mA, reverse voltage max 6.0 V. |
| 2 | C | passive | Cathode of the infrared emitting diode (input side). |
| 3 | NC | unconnected | No internal connection. |
| 4 | E | passive | Emitter of the silicon phototransistor output; emitter-collector breakdown voltage BVECO min 7.0 V. |
| 5 | C | passive | Collector of the silicon phototransistor output; collector-emitter breakdown voltage BVCEO min 30 V, collector current max 50 mA. |
| 6 | B | unconnected | Phototransistor base terminal, not connected internally, which improves common mode interference immunity. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-6 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current transfer ratio | CTR | 50 | | 80 | % | VCE = 10 V, IF = 10 mA | 3 |
| Breakdown voltage | VBR | 6 | | | V | IR = 10 μA | 2 |
| Collector emitter breakdown voltage | BVCEO | 30 | | | V | IC = 1.0 mA | 2 |
| Emitter collector breakdown voltage | BVECO | 7 | | | V | IE = 100 μA | 2 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 2 |
| Operating temperature | Tamb | -55 | | 100 | °C | | 2 |
| Reverse voltage | VR | | | 6 | V | | 2 |
| Forward continuous current | IF | | | 60 | mA | | 2 |
| Surge forward current | IFSM | | | 2.5 | A | t ≤ 10 μs | 2 |
| Power dissipation (input) | Pdiss | | | 100 | mW | | 2 |
| Collector current | IC | | | 50 | mA | | 2 |
| Power dissipation (output) | Pdiss | | | 150 | mW | | 2 |
| Total power dissipation | Ptot | | | 250 | mW | | 2 |
| Junction temperature | Tj | | | 100 | °C | | 2 |
| Soldering temperature | Tsld | | | 260 | °C | max. 10 s, dip soldering; distance to seating plane ≥ 1.5 mm | 2 |
| Forward voltage | VF | | 1.25 | 1.5 | V | IF = 10 mA | 2 |
| Reverse current | IR | | 0.01 | 10 | μA | VR = 6.0 V | 2 |
| Collector emitter dark current (MOC8101) | ICEO1 | | 1 | 50 | nA | VCE = 10 V, Tamp = 25 °C | 2 |
| Saturation voltage collector emitter | VCEsat | | 0.25 | 0.4 | V | IF = 5.0 mA | 2 |
| Maximum rated withstanding isolation voltage | VISO | | | 4420 | VRMS | t = 1 min | 3 |
| Maximum transient isolation voltage | VIOTM | | | 10000 | V | | 3 |
| Maximum repetitive peak isolation voltage | VIORM | | | 890 | V | | 3 |
| Output safety power | PSO | | | 400 | mW | | 3 |
| Input safety current | ISI | | | 275 | mA | | 3 |
| Input safety temperature | TSI | | | 175 | °C | | 3 |
| Capacitance | CO | | 25 | | pF | VR = 0 V, f = 1.0 MHz | 2 |
| Thermal resistance (input) | Rthja | | 750 | | K/W | | 2 |
| Collector emitter capacitance | CCE | | 5.2 | | pF | VCE = 5.0 V, f = 1.0 MHz | 2 |
| Thermal resistance (output) | Rthja | | 500 | | K/W | | 2 |
| Coupling capacitance | CC | | 0.6 | | pF | | 2 |
| Turn-on time | ton | | 3 | | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 |
| Turn-off time | toff | | 2.3 | | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 |
| Rise time | tr | | 2 | | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 |
| Fall time | tf | | 2 | | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 |
| Cut off frequency | fco | | 250 | | kHz | | 3 |
## CAD (Adom-generated)
- Symbol: `MOC8101-X017T`
- Footprint: `Adom_Gen:Vishay_Intertech_MOC8101_0c20f6`
- 3D model: generated to fit the land (STEP)
- 3D model files: `moc8101-x017t-etched.step` / `moc8101-x017t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `moc8101-x017t.step` / `moc8101-x017t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](docs/moc8101-x017t-datasheet.pdf) (7 pp, sha256 `f7997876bf7021d4`, retrieved 2026-11-07, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30.
[Datasheet PDF](docs/moc8101-x017t-datasheet.pdf)