← Commit history

moc8101-x017t: CAD wording names the Adom_Gen land, not KiCad official + land_source/land_note from the reviewer decision

Ray ·7392769014 · ·parent 86d0371
3 files changed +14−10
README.md+5−5
@@ -2,7 +2,7 @@  **Vishay Intertech** · Optocouplers - Phototransistor Output · DIP-6 -MOC8101-X017T from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+MOC8101-X017T from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.  ## Pinout @@ -66,11 +66,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Fall time | tf |  | 2 |  | μs | VCC = 10 V, IC = 2.0 mA, RL = 100 Ω | 3 | | Cut off frequency | fco |  | 250 |  | kHz |  | 3 | -## CAD (KiCad official)+## CAD (Adom-generated)  - Symbol: `MOC8101-X017T`-- Footprint: `Package_DIP:DIP-6_W7.62mm`-- 3D model: DIP-6 (KiCad packages3D, STEP)+- Footprint: `Adom_Gen:Vishay_Intertech_MOC8101_0c20f6`+- 3D model: generated to fit the land (STEP) - 3D model files: `moc8101-x017t-etched.step` / `moc8101-x017t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `moc8101-x017t.step` / `moc8101-x017t.glb` are the bare package body.  ## Provenance@@ -79,6 +79,6 @@ Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Vishay Intertech datasheet](docs/moc8101-x017t-datasheet.pdf) (7 pp, sha256 `f7997876bf7021d4`, retrieved 2026-11-07, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.-- **CAD:** KiCad official libraries (CC-BY-SA 4.0).+- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30.  [Datasheet PDF](docs/moc8101-x017t-datasheet.pdf)
package.json+4−2
@@ -127,7 +127,7 @@         "sha256": "f7997876bf7021d4",         "source_tier": "mfr"       },-      "cad": "KiCad official (CC-BY-SA 4.0)",+      "cad": "Adom_Gen derived land; symbol and 3D generated",       "pins": {         "total": 6,         "described": 6,@@ -178,7 +178,9 @@         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "land_source": "derived",+    "land_note": "Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30."   },   "visibility": "public" }
page.json+5−3
@@ -108,7 +108,7 @@         "sha256": "f7997876bf7021d4",         "source_tier": "mfr"       },-      "cad": "KiCad official (CC-BY-SA 4.0)",+      "cad": "Adom_Gen derived land; symbol and 3D generated",       "pins": {         "total": 6,         "described": 6,@@ -159,7 +159,9 @@         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "land_source": "derived",+    "land_note": "Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30."   },   "metadata": {     "specs": {@@ -636,4 +638,4 @@   "visibility": "public",   "description": "Vishay Intertech Optocouplers - Phototransistor Output, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "org": "adom"-}\ No newline at end of file+}