main
Ray Publish 0.1.1 cabbc77
{
  "schema_version": 1,
  "type": "component",
  "slug": "mm32l073tw",
  "title": "MM32L073TW",
  "brief": "MindMotion Microelectronics Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mm32l073tw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MM32L073TW",
    "manufacturer": "MindMotion Microelectronics",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d139adb2b05b1aa8ade28865fc3fb15e.pdf",
    "parts": {
      "symbol": "mm32l073tw.kicad_sym",
      "footprint": "mm32l073tw.kicad_mod",
      "model_3d": "mm32l073tw-hero.glb",
      "model_3d_plain": "mm32l073tw.glb",
      "model_3d_step": "mm32l073tw-etched.step",
      "model_3d_step_plain": "mm32l073tw.step",
      "lbr": "mm32l073tw.lbr"
    },
    "distributor_links": {
      "lcsc": "C316706"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T05:30:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PB8/BOOT0",
        "type": "bidirectional",
        "description": "Shared pin: PB8 is a 5V-tolerant (FT) GPIO (I2C1_SCL, TIM16_CH1, CAN_RX) and also BOOT0, which selects the boot mode at start-up."
      },
      {
        "number": "2",
        "name": "PD0/OSC_IN",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) GPIO, also the HSE oscillator input OSC_IN (CRS_SYNC, I2C1_SDA); the HSE input level must stay between VSS and VDD, with VIH at least 0.7VDD."
      },
      {
        "number": "3",
        "name": "PD1/OSC_OUT",
        "type": "bidirectional",
        "description": "GPIO (I2C1_SCL) that doubles as the HSE oscillator output OSC_OUT."
      },
      {
        "number": "4",
        "name": "NRST",
        "type": "input",
        "description": "Active-low reset input with CMOS Schmitt-trigger input (VIL max 0.8 V, VIH min 2 V) and an internal pull-up of about 15 kΩ, as given in Section 5.3.12."
      },
      {
        "number": "5",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply for the reset, oscillator and PLL blocks, specified at 2.0 V to 5.5 V and required to equal VDD."
      },
      {
        "number": "6",
        "name": "PA0",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[0], COMP1/COMP2 inputs, UART2_CTS and TIM2_CH1_ETR; its input must not exceed VDD."
      },
      {
        "number": "7",
        "name": "PA1",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[1], COMP1/COMP2 input, UART2_RTS and TIM2_CH2; its input must not exceed VDD."
      },
      {
        "number": "8",
        "name": "PA2",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[2], COMP2_OUT, UART2_TX and TIM2_CH3; its input must not exceed VDD."
      },
      {
        "number": "9",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[3], UART2_RX and TIM2_CH4; its input must not exceed VDD."
      },
      {
        "number": "10",
        "name": "PA4",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[4], SPI1_NSS and TIM14_CH1; its input must not exceed VDD."
      },
      {
        "number": "11",
        "name": "PA5",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[5], SPI1_SCK and TIM2_CH1_ETR; its input must not exceed VDD."
      },
      {
        "number": "12",
        "name": "PA6",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[6], SPI1_MISO, TIM3_CH1, TIM1_BKIN and COMP1_OUT; its input must not exceed VDD."
      },
      {
        "number": "13",
        "name": "PA7",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[7], SPI1_MOSI, TIM3_CH2, TIM1_CH1N and COMP2_OUT; its input must not exceed VDD."
      },
      {
        "number": "14",
        "name": "PB1",
        "type": "bidirectional",
        "description": "Standard (TC) GPIO that is also ADC1_VIN[9], TIM14_CH1, TIM3_CH4 and TIM1_CH3N; its input must not exceed VDD."
      },
      {
        "number": "15",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the digital supply; the datasheet also lists VSSA against this same pin number in the TSSOP20 column."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply and I/O supply, specified at 2.0 V to 5.5 V."
      },
      {
        "number": "17",
        "name": "PA11/USBDM",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) GPIO that is also the USB D- signal (USBDM), CAN_RX, UART1_CTS, TIM1_CH4, I2C1_SCL and COMP1_OUT."
      },
      {
        "number": "18",
        "name": "PA12/USBDP",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) GPIO that is also the USB D+ signal (USBDP), CAN_TX, UART1_RTS, TIM1_ETR, I2C1_SDA and COMP2_OUT."
      },
      {
        "number": "19",
        "name": "PA13",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) GPIO that is also the SWD data pin SWDIO."
      },
      {
        "number": "20",
        "name": "PA14",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) GPIO that is also the SWD clock pin SWDCLK and UART2_TX."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table lists both VSS (row 23/47) and VSSA (row 8) against TSSOP pin 15, while the TSSOP20 pa; BOOT0 and PB8 both map to TSSOP pin 1 in the pin table; the package figure labels this pin PB8/BOOT0; The pin table marks PD1/OSC_OUT with type 'S' (power), which conflicts with its GPIO function (I2C1_",
          "10/20 pins cited to the wrong page (name found elsewhere): ['4:NRST@p16', '5:VDDA@p16', '6:PA0@p16', '7:PA1@p16']"
        ],
        "pages_sent": 63,
        "cost_usd": 0.248,
        "at": "2026-10-30T05:30:26"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d139adb2b05b1aa8ade28865fc3fb15e.pdf",
        "pages": 67,
        "sha256": "2322348b9af26b01",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mm32l073tw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mm32l073tw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "25bcccaf716d7829943bf1d9372dac7c2f7e2e0246b05399fed26fefa5ac3daf",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "MindMotion Microelectronics",
      "Package": "TSSOP-20",
      "Category": "Embedded Processors & Controllers",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mm32l073tw"
  ],
  "discovery_pitch": "MM32L073TW (MindMotion Microelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mm32l073tw.kicad_sym",
    "mm32l073tw.kicad_mod",
    "mm32l073tw.glb",
    "mm32l073tw.step",
    "mm32l073tw.lbr",
    "docs/hero.png",
    "docs/mm32l073tw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mm32l073tw-hero.glb",
    "mm32l073tw-hero.overlay.json",
    "mm32l073tw-etched.glb",
    "mm32l073tw-etched.step"
  ],
  "visibility": "public",
  "description": "MindMotion Microelectronics Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}