Generated by kicad-footprint-generator · KiCad file format 20260206
MM32L073TW
MindMotion Microelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
MM32L073TW from MindMotion Microelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB8/BOOT0 | bidirectional | Shared pin: PB8 is a 5V-tolerant (FT) GPIO (I2C1_SCL, TIM16_CH1, CAN_RX) and also BOOT0, which selects the boot mode at start-up. |
| 2 | PD0/OSC_IN | bidirectional | 5V-tolerant (FT) GPIO, also the HSE oscillator input OSC_IN (CRS_SYNC, I2C1_SDA); the HSE input level must stay between VSS and VDD, with VIH at least 0.7VDD. |
| 3 | PD1/OSC_OUT | bidirectional | GPIO (I2C1_SCL) that doubles as the HSE oscillator output OSC_OUT. |
| 4 | NRST | input | Active-low reset input with CMOS Schmitt-trigger input (VIL max 0.8 V, VIH min 2 V) and an internal pull-up of about 15 kΩ, as given in Section 5.3.12. |
| 5 | VDDA | power_in | Analog supply for the reset, oscillator and PLL blocks, specified at 2.0 V to 5.5 V and required to equal VDD. |
| 6 | PA0 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[0], COMP1/COMP2 inputs, UART2_CTS and TIM2_CH1_ETR; its input must not exceed VDD. |
| 7 | PA1 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[1], COMP1/COMP2 input, UART2_RTS and TIM2_CH2; its input must not exceed VDD. |
| 8 | PA2 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[2], COMP2_OUT, UART2_TX and TIM2_CH3; its input must not exceed VDD. |
| 9 | PA3 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[3], UART2_RX and TIM2_CH4; its input must not exceed VDD. |
| 10 | PA4 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[4], SPI1_NSS and TIM14_CH1; its input must not exceed VDD. |
| 11 | PA5 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[5], SPI1_SCK and TIM2_CH1_ETR; its input must not exceed VDD. |
| 12 | PA6 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[6], SPI1_MISO, TIM3_CH1, TIM1_BKIN and COMP1_OUT; its input must not exceed VDD. |
| 13 | PA7 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[7], SPI1_MOSI, TIM3_CH2, TIM1_CH1N and COMP2_OUT; its input must not exceed VDD. |
| 14 | PB1 | bidirectional | Standard (TC) GPIO that is also ADC1_VIN[9], TIM14_CH1, TIM3_CH4 and TIM1_CH3N; its input must not exceed VDD. |
| 15 | VSS | power_in | Ground reference for the digital supply; the datasheet also lists VSSA against this same pin number in the TSSOP20 column. |
| 16 | VDD | power_in | Digital supply and I/O supply, specified at 2.0 V to 5.5 V. |
| 17 | PA11/USBDM | bidirectional | 5V-tolerant (FT) GPIO that is also the USB D- signal (USBDM), CAN_RX, UART1_CTS, TIM1_CH4, I2C1_SCL and COMP1_OUT. |
| 18 | PA12/USBDP | bidirectional | 5V-tolerant (FT) GPIO that is also the USB D+ signal (USBDP), CAN_TX, UART1_RTS, TIM1_ETR, I2C1_SDA and COMP2_OUT. |
| 19 | PA13 | bidirectional | 5V-tolerant (FT) GPIO that is also the SWD data pin SWDIO. |
| 20 | PA14 | bidirectional | 5V-tolerant (FT) GPIO that is also the SWD clock pin SWDCLK and UART2_TX. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MindMotion Microelectronics |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
MM32L073TW - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mm32l073tw-etched.step/mm32l073tw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mm32l073tw.step/mm32l073tw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MindMotion Microelectronics datasheet (67 pp, sha256
2322348b9af26b01, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).