main
History Download
Ray Publish 0.1.0 ca30a0a

MM32F0144C6P

MindMotion Microelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

MM32F0144C6P from MindMotion Microelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 PC13 bidirectional General-purpose I/O (TC level, input not above VDD) with TIM2_CH1 as alternate function.
3 PC14 bidirectional General-purpose I/O (TC level, input not above VDD) with TIM2_CH2 as alternate function.
4 PC15 bidirectional General-purpose I/O (TC level, input not above VDD) with TIM2_CH3 as alternate function.
5 PD0-OSC_IN bidirectional General-purpose I/O PD0 and external oscillator input (OSC_IN), with UART3_TX and I2C_SDA alternate functions.
6 PD1-OSC_OUT bidirectional General-purpose I/O PD1 and external oscillator output (OSC_OUT), with UART3_RX and I2C_SCL alternate functions.
7 NRST1 bidirectional Device reset I/O with a non-removable internal pull-up (50 to 75 kΩ); must be pulled below VIL(NRST) max 1.4 V at VDD=3.3V to reset the MCU.
8 VSS power_in Digital ground supply pin.
9 VDDA power_in Analog supply (2.0V to 5.5V, performance guaranteed from 2.5V) for ADC, reset block, oscillators and PLL analog parts.
10 PA0-WKUP bidirectional General-purpose I/O with WKUP standby wake-up rising edge input, UART2_CTS, TIM2_CH1/ETR, SPI2_NSS/I2S2_WS, TIM2_CH3, COMP1_OUT and ADC1_VIN[0].
11 PA1 bidirectional General-purpose I/O with UART2_RTS, TIM2_CH2, ADC1_VIN[1] and COMP_INP[0].
12 PA2 bidirectional General-purpose I/O with UART2_TX, TIM2_CH3, SPI2_NSS/I2S2_WS, ADC1_VIN[2] and COMP_INP[1].
13 PA3 bidirectional General-purpose I/O with UART2_RX, TIM2_CH4, ADC1_VIN[3] and COMP_INP[2].
14 PA4 bidirectional General-purpose I/O with SPI1_NSS/I2S1_WS, TIM1_BKIN, TIM14_CH1, I2C_SDA, ADC1_VIN[4] and COMP_INP[3].
15 PA5 bidirectional General-purpose I/O with SPI1_SCK/I2S1_CK, TIM2_CH1/ETR, TIM1_ETR, I2C_SCL, TIM1_CH3N, ADC1_VIN[5] and COMP_INM[0].
16 PA6 bidirectional General-purpose I/O with SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, UART2_RX, TIM1_ETR, TIM16_CH1, TIM1_CH3, COMP1_OUT, ADC1_VIN[6] and COMP_INM[1].
17 PA7 bidirectional General-purpose I/O with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, TIM1_CH2N, TIM1_CH3N, ADC1_VIN[7] and COMP_INM[2].
18 PB0 bidirectional General-purpose I/O with TIM3_CH3, TIM1_CH2N, TIM1_CH1N, TIM1_CH3 and ADC1_VIN[8].
19 PB1 bidirectional General-purpose I/O with TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH4, TIM1_CH2N, MCO, TIM1_CH2, TIM1_CH1N and ADC1_VIN[9].
20 PB2 bidirectional General-purpose I/O (TC level) with no alternate functions listed.
21 PB10 bidirectional General-purpose I/O with I2C_SCL, TIM2_CH3, UART3_TX and SPI2_SCK/I2S2_CK.
22 PB11 bidirectional General-purpose I/O with I2C_SDA, TIM2_CH4 and UART3_RX.
23 VSS power_in Digital ground supply pin.
24 VDD power_in Digital supply pin for I/O and internal regulator, 2.0V to 5.5V.
25 PB12 bidirectional General-purpose I/O with SPI2_NSS/I2S2_WS, SPI2_SCK/I2S2_CK, TIM1_BKIN, SPI2_MOSI/I2S2_SD and SPI2_MISO/I2S2_MCK.
26 PB13 bidirectional General-purpose I/O with SPI2 signals, TIM1_CH1N, TIM1_CH3N, I2C_SCL, TIM2_CH1 and UART3_CTS.
27 PB14 bidirectional General-purpose I/O with SPI2 signals, TIM1_CH2N, TIM1_CH3, TIM1_CH1, I2C_SDA and UART3_RTS.
28 PB15 bidirectional General-purpose I/O with SPI2 signals, TIM1_CH3N, TIM1_CH2N and TIM1_CH2.
29 PA8 bidirectional General-purpose I/O with MCO, TIM1_CH1, TIM1_CH2 and TIM1_CH3.
30 PA9 bidirectional General-purpose I/O with UART1_TX/RX, TIM1_CH2, I2C_SCL, MCO, TIM1_CH1N, TIM1_CH4 and CAN_RX.
31 PA10 bidirectional General-purpose I/O with TIM17_BKIN, UART1_RX/TX, TIM1_CH3, I2C_SDA, TIM1_CH1, SPI2_SCK/I2S2_CK and CAN_TX.
32 PA11 bidirectional General-purpose I/O with UART3_TX, UART1_CTS, TIM1_CH4, CAN_RX, SPI2_MOSI/I2S2_SD, I2C_SCL and COMP1_OUT.
33 PA12 bidirectional General-purpose I/O with UART3_RX, UART1_RTS, TIM1_ETR, CAN_TX, SPI2_MISO/I2S2_MCK, I2C_SDA and TIM1_CH2.
34 PA13 bidirectional General-purpose I/O with SWDIO main function, UART1_TX, SPI2_MISO/I2S2_MCK, MCO, TIM1_CH2 and TIM1_BKIN.
35 PD2 bidirectional General-purpose I/O (TC level) with no alternate functions listed.
36 PD3 bidirectional General-purpose I/O (TC level) with no alternate functions listed.
37 PA14 bidirectional General-purpose I/O with SWDCLK main function, UART2_TX, UART1_RX and SPI1_NSS/I2S1_WS.
38 PA15 bidirectional General-purpose I/O with SPI1_NSS/I2S1_WS, UART2_RX and TIM2_CH1/ETR.
39 PB3 bidirectional General-purpose I/O with SPI1_SCK/I2S1_CK, TIM2_CH2, UART1_TX, TIM2_CH3, TIM1_CH1, TIM2_CH1 and ADC1_VIN[10].
40 PB4 bidirectional General-purpose I/O with SPI1_MISO/I2S1_MCK, TIM3_CH1, UART1_RX, TIM17_BKIN, TIM1_CH2, TIM2_CH2 and ADC1_VIN[11].
41 PB5 bidirectional General-purpose I/O with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, MCO, TIM1_CH3 and TIM2_CH3.
42 PB6 bidirectional General-purpose I/O with UART1_TX, I2C_SCL, TIM16_CH1N and TIM2_CH1.
43 PB7 bidirectional General-purpose I/O with UART1_RX, I2C_SDA, TIM17_CH1N, UART2_TX and ADC1_VIN[12].
44 PD5-BOOT0 bidirectional General-purpose I/O PD5 that also serves as the BOOT0 boot-mode selection pin.
45 PB8 bidirectional General-purpose I/O with I2C_SCL, TIM16_CH1, CAN_RX and UART2_RX.
46 PB9 bidirectional General-purpose I/O with I2C_SDA, TIM17_CH1, CAN_TX, TIM1_CH4 and SPI2_NSS/I2S2_WS.
47 VSS power_in Digital ground supply pin.
48 VDD power_in Digital supply pin for I/O and internal regulator, 2.0V to 5.5V.

Key specifications

Parameter Value
Manufacturer MindMotion Microelectronics
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA and VSSA) VDDx-VSSx -0.3 5.8 V 37
Total current through VDD/VDDA power pins (supply current) IVDD/VDDA 120 mA 37
Total current through VSS/VSSA ground pins (outflow current) IVSS/VSSA -120 mA 37
Output sink current on any I/O and control pins IIO 25 mA 37
Output current on any I/O and control pins IIO -25 mA 37
NRST pin injection current IINJ(PIN) -5 5 mA 37
HSE OSC_IN pin injection current IINJ(PIN) -5 5 mA 37
Other pins injection current (sum) ΣIINJ(PIN) -25 25 mA 37
Internal AHB clock frequency fHCLK 72 MHz 37
Internal APB2 clock frequency fPCLK2 72 MHz 37
Internal APB1 clock frequency fPCLK1 72 MHz 38
Digital circuit operating voltage VDD 2 3.3 5.5 V 38
Analog circuit operating voltage (performance guaranteed) VDDA 2.5 3.3 5.5 V Performance is guaranteed; must be the same as VDD 38
Analog circuit operating voltage (performance not guaranteed) VDDA 2 2.5 V Performance is not guaranteed 38
Power dissipation, LQFP48 PD 357 mW Temperature: TA = 85°C or TA = 105°C 38
Ambient temperature (industrial level) TA -40 85 °C 38
Ambient temperature (extended industrial level) TA -40 105 °C 38
Junction temperature (industrial level) TJ -40 105 °C 38
Junction temperature (extended industrial level) TJ -40 125 °C 38
VDD rise time tr 1 us 38
VDD fall time tf 400 us 38
Supply current in Stop mode (max at 25°C) IDD 150 μA Enter Stop mode after reset, VDD=3.3V 41
Supply current in Stop mode (max at -40~105°C) IDD 324 μA Enter Stop mode after reset, VDD=3.3V 41
Supply current in Deep Stop mode (max at 25°C) IDD 5 μA Enter Deep Stop mode after reset, VDD=3.3V 41
Supply current in Deep Stop mode (max at -40~105°C) IDD 55 μA Enter Deep Stop mode after reset, VDD=3.3V 41
Supply current in Standby mode (max at 25°C) IDD 3 μA IWDG disabled 41
Supply current in Standby mode (max at -40~105°C) IDD 5.62 μA IWDG disabled 41
Low level input voltage VIL 0.8 V VDD = 3.3V 49
High level input voltage VIH 2 V VDD = 3.3V 49
Input leakage current Ilkg -1 1 μA VDD = 3.3V 49
Weak pull-up equivalent resistor RPU 50 60 75 kΩ VDD = 3.3V, VIN = VSS 49
Weak pull-down equivalent resistor RPD 50 60 75 kΩ VDD = 3.3V, VIN = VDD 49
I/O pin capacitance CIO 10 pF 49
NRST input low voltage VIL(NRST) 1.4 V VDD=3.3V 51
NRST input high voltage VIH(NRST) 2 V VDD=3.3V 51
NRST weak pull-up equivalent resistor RPU 50 60 75 kΩ VIN = VSS 52
NRST input filtered pulse VF(NRST) 1 uS 52
HSI oscillator deviation ACCHSI -2.5 2.5 % TA = -40°C~ 105°C 45
HSI oscillator deviation ACCHSI -1 1 % TA = 25°C 45
HSI oscillator startup time Tstab(HSI) 20 μs 45
LSI oscillator frequency fLSI 20 70 KHz TA = -40°C~ 105°C 46
LSI oscillator startup time tSU(LSI) 100 μs 46
PLL input clock fPLL_IN 4 8 24 MHz 46
PLL input clock duty cycle DPLL_IN 20 80 % 46
VCO output clock fvco 80 200 MHz 46
PLL output clock fPLL_OUT 40 100 MHz 46
16-bit programming time tprog 131.5 154.5 μs 46
Page (1024 bytes) erase time tERASE 4 6 ms 47
Mass erase time tME 30 40 ms 47
Flash supply current, read mode IDD 2 mA Read mode 40MHz 47
Flash supply current, write mode IDD 1.2 mA Write mode 47
Flash supply current, erase mode IDD 0.6 mA Erase mode 47
Flash endurance NEND 100000 Cycles 47
Flash data retention TDR 10 Years TA = 105°C 47
Flash data retention TDR 20 Years TA = 85°C 47
Flash data retention TDR 100 Years TA = 25°C 47

CAD (KiCad official)

  • Symbol: MM32F0144C6P
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: mm32f0144c6p-etched.step / mm32f0144c6p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mm32f0144c6p.step / mm32f0144c6p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MindMotion Microelectronics datasheet (74 pp, sha256 0983ef4e0bc658c9, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF