Generated by kicad-footprint-generator · KiCad file format 20260206
MM32F0144C6P
MindMotion Microelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
MM32F0144C6P from MindMotion Microelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | PC13 | bidirectional | General-purpose I/O (TC level, input not above VDD) with TIM2_CH1 as alternate function. |
| 3 | PC14 | bidirectional | General-purpose I/O (TC level, input not above VDD) with TIM2_CH2 as alternate function. |
| 4 | PC15 | bidirectional | General-purpose I/O (TC level, input not above VDD) with TIM2_CH3 as alternate function. |
| 5 | PD0-OSC_IN | bidirectional | General-purpose I/O PD0 and external oscillator input (OSC_IN), with UART3_TX and I2C_SDA alternate functions. |
| 6 | PD1-OSC_OUT | bidirectional | General-purpose I/O PD1 and external oscillator output (OSC_OUT), with UART3_RX and I2C_SCL alternate functions. |
| 7 | NRST1 | bidirectional | Device reset I/O with a non-removable internal pull-up (50 to 75 kΩ); must be pulled below VIL(NRST) max 1.4 V at VDD=3.3V to reset the MCU. |
| 8 | VSS | power_in | Digital ground supply pin. |
| 9 | VDDA | power_in | Analog supply (2.0V to 5.5V, performance guaranteed from 2.5V) for ADC, reset block, oscillators and PLL analog parts. |
| 10 | PA0-WKUP | bidirectional | General-purpose I/O with WKUP standby wake-up rising edge input, UART2_CTS, TIM2_CH1/ETR, SPI2_NSS/I2S2_WS, TIM2_CH3, COMP1_OUT and ADC1_VIN[0]. |
| 11 | PA1 | bidirectional | General-purpose I/O with UART2_RTS, TIM2_CH2, ADC1_VIN[1] and COMP_INP[0]. |
| 12 | PA2 | bidirectional | General-purpose I/O with UART2_TX, TIM2_CH3, SPI2_NSS/I2S2_WS, ADC1_VIN[2] and COMP_INP[1]. |
| 13 | PA3 | bidirectional | General-purpose I/O with UART2_RX, TIM2_CH4, ADC1_VIN[3] and COMP_INP[2]. |
| 14 | PA4 | bidirectional | General-purpose I/O with SPI1_NSS/I2S1_WS, TIM1_BKIN, TIM14_CH1, I2C_SDA, ADC1_VIN[4] and COMP_INP[3]. |
| 15 | PA5 | bidirectional | General-purpose I/O with SPI1_SCK/I2S1_CK, TIM2_CH1/ETR, TIM1_ETR, I2C_SCL, TIM1_CH3N, ADC1_VIN[5] and COMP_INM[0]. |
| 16 | PA6 | bidirectional | General-purpose I/O with SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, UART2_RX, TIM1_ETR, TIM16_CH1, TIM1_CH3, COMP1_OUT, ADC1_VIN[6] and COMP_INM[1]. |
| 17 | PA7 | bidirectional | General-purpose I/O with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, TIM1_CH2N, TIM1_CH3N, ADC1_VIN[7] and COMP_INM[2]. |
| 18 | PB0 | bidirectional | General-purpose I/O with TIM3_CH3, TIM1_CH2N, TIM1_CH1N, TIM1_CH3 and ADC1_VIN[8]. |
| 19 | PB1 | bidirectional | General-purpose I/O with TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH4, TIM1_CH2N, MCO, TIM1_CH2, TIM1_CH1N and ADC1_VIN[9]. |
| 20 | PB2 | bidirectional | General-purpose I/O (TC level) with no alternate functions listed. |
| 21 | PB10 | bidirectional | General-purpose I/O with I2C_SCL, TIM2_CH3, UART3_TX and SPI2_SCK/I2S2_CK. |
| 22 | PB11 | bidirectional | General-purpose I/O with I2C_SDA, TIM2_CH4 and UART3_RX. |
| 23 | VSS | power_in | Digital ground supply pin. |
| 24 | VDD | power_in | Digital supply pin for I/O and internal regulator, 2.0V to 5.5V. |
| 25 | PB12 | bidirectional | General-purpose I/O with SPI2_NSS/I2S2_WS, SPI2_SCK/I2S2_CK, TIM1_BKIN, SPI2_MOSI/I2S2_SD and SPI2_MISO/I2S2_MCK. |
| 26 | PB13 | bidirectional | General-purpose I/O with SPI2 signals, TIM1_CH1N, TIM1_CH3N, I2C_SCL, TIM2_CH1 and UART3_CTS. |
| 27 | PB14 | bidirectional | General-purpose I/O with SPI2 signals, TIM1_CH2N, TIM1_CH3, TIM1_CH1, I2C_SDA and UART3_RTS. |
| 28 | PB15 | bidirectional | General-purpose I/O with SPI2 signals, TIM1_CH3N, TIM1_CH2N and TIM1_CH2. |
| 29 | PA8 | bidirectional | General-purpose I/O with MCO, TIM1_CH1, TIM1_CH2 and TIM1_CH3. |
| 30 | PA9 | bidirectional | General-purpose I/O with UART1_TX/RX, TIM1_CH2, I2C_SCL, MCO, TIM1_CH1N, TIM1_CH4 and CAN_RX. |
| 31 | PA10 | bidirectional | General-purpose I/O with TIM17_BKIN, UART1_RX/TX, TIM1_CH3, I2C_SDA, TIM1_CH1, SPI2_SCK/I2S2_CK and CAN_TX. |
| 32 | PA11 | bidirectional | General-purpose I/O with UART3_TX, UART1_CTS, TIM1_CH4, CAN_RX, SPI2_MOSI/I2S2_SD, I2C_SCL and COMP1_OUT. |
| 33 | PA12 | bidirectional | General-purpose I/O with UART3_RX, UART1_RTS, TIM1_ETR, CAN_TX, SPI2_MISO/I2S2_MCK, I2C_SDA and TIM1_CH2. |
| 34 | PA13 | bidirectional | General-purpose I/O with SWDIO main function, UART1_TX, SPI2_MISO/I2S2_MCK, MCO, TIM1_CH2 and TIM1_BKIN. |
| 35 | PD2 | bidirectional | General-purpose I/O (TC level) with no alternate functions listed. |
| 36 | PD3 | bidirectional | General-purpose I/O (TC level) with no alternate functions listed. |
| 37 | PA14 | bidirectional | General-purpose I/O with SWDCLK main function, UART2_TX, UART1_RX and SPI1_NSS/I2S1_WS. |
| 38 | PA15 | bidirectional | General-purpose I/O with SPI1_NSS/I2S1_WS, UART2_RX and TIM2_CH1/ETR. |
| 39 | PB3 | bidirectional | General-purpose I/O with SPI1_SCK/I2S1_CK, TIM2_CH2, UART1_TX, TIM2_CH3, TIM1_CH1, TIM2_CH1 and ADC1_VIN[10]. |
| 40 | PB4 | bidirectional | General-purpose I/O with SPI1_MISO/I2S1_MCK, TIM3_CH1, UART1_RX, TIM17_BKIN, TIM1_CH2, TIM2_CH2 and ADC1_VIN[11]. |
| 41 | PB5 | bidirectional | General-purpose I/O with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, MCO, TIM1_CH3 and TIM2_CH3. |
| 42 | PB6 | bidirectional | General-purpose I/O with UART1_TX, I2C_SCL, TIM16_CH1N and TIM2_CH1. |
| 43 | PB7 | bidirectional | General-purpose I/O with UART1_RX, I2C_SDA, TIM17_CH1N, UART2_TX and ADC1_VIN[12]. |
| 44 | PD5-BOOT0 | bidirectional | General-purpose I/O PD5 that also serves as the BOOT0 boot-mode selection pin. |
| 45 | PB8 | bidirectional | General-purpose I/O with I2C_SCL, TIM16_CH1, CAN_RX and UART2_RX. |
| 46 | PB9 | bidirectional | General-purpose I/O with I2C_SDA, TIM17_CH1, CAN_TX, TIM1_CH4 and SPI2_NSS/I2S2_WS. |
| 47 | VSS | power_in | Digital ground supply pin. |
| 48 | VDD | power_in | Digital supply pin for I/O and internal regulator, 2.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MindMotion Microelectronics |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VSSA) | VDDx-VSSx | -0.3 | 5.8 | V | 37 | ||
| Total current through VDD/VDDA power pins (supply current) | IVDD/VDDA | 120 | mA | 37 | |||
| Total current through VSS/VSSA ground pins (outflow current) | IVSS/VSSA | -120 | mA | 37 | |||
| Output sink current on any I/O and control pins | IIO | 25 | mA | 37 | |||
| Output current on any I/O and control pins | IIO | -25 | mA | 37 | |||
| NRST pin injection current | IINJ(PIN) | -5 | 5 | mA | 37 | ||
| HSE OSC_IN pin injection current | IINJ(PIN) | -5 | 5 | mA | 37 | ||
| Other pins injection current (sum) | ΣIINJ(PIN) | -25 | 25 | mA | 37 | ||
| Internal AHB clock frequency | fHCLK | 72 | MHz | 37 | |||
| Internal APB2 clock frequency | fPCLK2 | 72 | MHz | 37 | |||
| Internal APB1 clock frequency | fPCLK1 | 72 | MHz | 38 | |||
| Digital circuit operating voltage | VDD | 2 | 3.3 | 5.5 | V | 38 | |
| Analog circuit operating voltage (performance guaranteed) | VDDA | 2.5 | 3.3 | 5.5 | V | Performance is guaranteed; must be the same as VDD | 38 |
| Analog circuit operating voltage (performance not guaranteed) | VDDA | 2 | 2.5 | V | Performance is not guaranteed | 38 | |
| Power dissipation, LQFP48 | PD | 357 | mW | Temperature: TA = 85°C or TA = 105°C | 38 | ||
| Ambient temperature (industrial level) | TA | -40 | 85 | °C | 38 | ||
| Ambient temperature (extended industrial level) | TA | -40 | 105 | °C | 38 | ||
| Junction temperature (industrial level) | TJ | -40 | 105 | °C | 38 | ||
| Junction temperature (extended industrial level) | TJ | -40 | 125 | °C | 38 | ||
| VDD rise time | tr | 1 | us | 38 | |||
| VDD fall time | tf | 400 | us | 38 | |||
| Supply current in Stop mode (max at 25°C) | IDD | 150 | μA | Enter Stop mode after reset, VDD=3.3V | 41 | ||
| Supply current in Stop mode (max at -40~105°C) | IDD | 324 | μA | Enter Stop mode after reset, VDD=3.3V | 41 | ||
| Supply current in Deep Stop mode (max at 25°C) | IDD | 5 | μA | Enter Deep Stop mode after reset, VDD=3.3V | 41 | ||
| Supply current in Deep Stop mode (max at -40~105°C) | IDD | 55 | μA | Enter Deep Stop mode after reset, VDD=3.3V | 41 | ||
| Supply current in Standby mode (max at 25°C) | IDD | 3 | μA | IWDG disabled | 41 | ||
| Supply current in Standby mode (max at -40~105°C) | IDD | 5.62 | μA | IWDG disabled | 41 | ||
| Low level input voltage | VIL | 0.8 | V | VDD = 3.3V | 49 | ||
| High level input voltage | VIH | 2 | V | VDD = 3.3V | 49 | ||
| Input leakage current | Ilkg | -1 | 1 | μA | VDD = 3.3V | 49 | |
| Weak pull-up equivalent resistor | RPU | 50 | 60 | 75 | kΩ | VDD = 3.3V, VIN = VSS | 49 |
| Weak pull-down equivalent resistor | RPD | 50 | 60 | 75 | kΩ | VDD = 3.3V, VIN = VDD | 49 |
| I/O pin capacitance | CIO | 10 | pF | 49 | |||
| NRST input low voltage | VIL(NRST) | 1.4 | V | VDD=3.3V | 51 | ||
| NRST input high voltage | VIH(NRST) | 2 | V | VDD=3.3V | 51 | ||
| NRST weak pull-up equivalent resistor | RPU | 50 | 60 | 75 | kΩ | VIN = VSS | 52 |
| NRST input filtered pulse | VF(NRST) | 1 | uS | 52 | |||
| HSI oscillator deviation | ACCHSI | -2.5 | 2.5 | % | TA = -40°C~ 105°C | 45 | |
| HSI oscillator deviation | ACCHSI | -1 | 1 | % | TA = 25°C | 45 | |
| HSI oscillator startup time | Tstab(HSI) | 20 | μs | 45 | |||
| LSI oscillator frequency | fLSI | 20 | 70 | KHz | TA = -40°C~ 105°C | 46 | |
| LSI oscillator startup time | tSU(LSI) | 100 | μs | 46 | |||
| PLL input clock | fPLL_IN | 4 | 8 | 24 | MHz | 46 | |
| PLL input clock duty cycle | DPLL_IN | 20 | 80 | % | 46 | ||
| VCO output clock | fvco | 80 | 200 | MHz | 46 | ||
| PLL output clock | fPLL_OUT | 40 | 100 | MHz | 46 | ||
| 16-bit programming time | tprog | 131.5 | 154.5 | μs | 46 | ||
| Page (1024 bytes) erase time | tERASE | 4 | 6 | ms | 47 | ||
| Mass erase time | tME | 30 | 40 | ms | 47 | ||
| Flash supply current, read mode | IDD | 2 | mA | Read mode 40MHz | 47 | ||
| Flash supply current, write mode | IDD | 1.2 | mA | Write mode | 47 | ||
| Flash supply current, erase mode | IDD | 0.6 | mA | Erase mode | 47 | ||
| Flash endurance | NEND | 100000 | Cycles | 47 | |||
| Flash data retention | TDR | 10 | Years | TA = 105°C | 47 | ||
| Flash data retention | TDR | 20 | Years | TA = 85°C | 47 | ||
| Flash data retention | TDR | 100 | Years | TA = 25°C | 47 |
CAD (KiCad official)
- Symbol:
MM32F0144C6P - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
mm32f0144c6p-etched.step/mm32f0144c6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mm32f0144c6p.step/mm32f0144c6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MindMotion Microelectronics datasheet (74 pp, sha256
0983ef4e0bc658c9, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).